EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Materials for Energy Efficiency and Thermal Comfort in Buildings

Download or read book Materials for Energy Efficiency and Thermal Comfort in Buildings written by Matthew R Hall and published by Elsevier. This book was released on 2010-04-21 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost half of the total energy produced in the developed world is inefficiently used to heat, cool, ventilate and control humidity in buildings, to meet the increasingly high thermal comfort levels demanded by occupants. The utilisation of advanced materials and passive technologies in buildings would substantially reduce the energy demand and improve the environmental impact and carbon footprint of building stock worldwide.Materials for energy efficiency and thermal comfort in buildings critically reviews the advanced building materials applicable for improving the built environment. Part one reviews both fundamental building physics and occupant comfort in buildings, from heat and mass transport, hygrothermal behaviour, and ventilation, on to thermal comfort and health and safety requirements.Part two details the development of advanced materials and sustainable technologies for application in buildings, beginning with a review of lifecycle assessment and environmental profiling of materials. The section moves on to review thermal insulation materials, materials for heat and moisture control, and heat energy storage and passive cooling technologies. Part two concludes with coverage of modern methods of construction, roofing design and technology, and benchmarking of façades for optimised building thermal performance.Finally, Part three reviews the application of advanced materials, design and technologies in a range of existing and new building types, including domestic, commercial and high-performance buildings, and buildings in hot and tropical climates.This book is of particular use to, mechanical, electrical and HVAC engineers, architects and low-energy building practitioners worldwide, as well as to academics and researchers in the fields of building physics, civil and building engineering, and materials science. - Explores improving energy efficiency and thermal comfort through material selection and sustainable technologies - Documents the development of advanced materials and sustainable technologies for applications in building design and construction - Examines fundamental building physics and occupant comfort in buildings featuring heat and mass transport, hygrothermal behaviour and ventilation

Book Materials for Architects and Builders

Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2019-08-28 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new sixth edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy-saving building components.

Book Materials for Architects and Builders

Download or read book Materials for Architects and Builders written by Arthur R. Lyons and published by Routledge. This book was released on 2010 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bricks and brickwork; Blocks and blockwork; Lime, cement and concrete; Timber and timber products; Ferrous and non-ferrous metals; Bitumen and flat roofing materials; Glass; Ceramic materials; Stone and cast stone; Plastics; Glass-fibre reinforced plastics, cement and gypsum; Plaster and board materials; Insulation materials; Sealants, gaskets and adhesives; Paints, wood stains, varnishes and colour; Energy-saving materials and componets; Recycled and ecological materials; Sustainability

Book Thermal Insulation Handbook for the Oil  Gas  and Petrochemical Industries

Download or read book Thermal Insulation Handbook for the Oil Gas and Petrochemical Industries written by Alireza Bahadori and published by Gulf Professional Publishing. This book was released on 2014-03-14 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Insulation Handbook for the Oil and Gas Industries addresses relative design, materials, procedures, and standard installation necessities for various oil and gas infrastructure such as pipelines, subsea equipment, vessels, and tanks. With the continued increase in available natural gas ready to export — especially LNG — and the definition of "deepwater" changing every year, an understanding of thermal insulation is more critical than ever. This one-of-a-kind handbook helps oil and gas engineers ensure that their products are exporting safely and that the equipment's integrity is protected. Topics include: - Design considerations and component selection, including newer materials such as cellular glass - Methods to properly install the insulation material and notable inspection and safety considerations in accordance with applicable US and international standards, specifically designed for the oil and gas industry - Calculations to make sure that every scenario is considered and requirements for size, composition, and packaging are met effectively - Understand all appropriate, new and existing, insulation material properties as well as installation requirements - Gain practical knowledge on factors affecting insulation efficiency, rules of thumb, and links to real-world case studies - Maximize flow assurance safely and economically with critical calculations provided

Book Corrosion Under Insulation  CUI  Guidelines

Download or read book Corrosion Under Insulation CUI Guidelines written by and published by Elsevier. This book was released on 2014-01-23 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion under insulation (CUI) refers to the external corrosion of piping and vessels that occurs underneath externally clad/jacketed insulation as a result of the penetration of water. By its very nature CUI tends to remain undetected until the insulation and cladding/jacketing is removed to allow inspection or when leaks occur. CUI is a common problem shared by the refining, petrochemical, power, industrial, onshore and offshore industries. The European Federation of Corrosion (EFC) Working Parties WP13 and WP15 have worked to provide guidelines on managing CUI together with a number of major European refining, petrochemical and offshore companies including BP, Chevron-Texaco, Conoco-Phillips, ENI, Exxon-Mobil, IFP, MOL, Scanraff, Statoil, Shell, Total and Borealis. The guidelines within this document are intended for use on all plants and installations that contain insulated vessels, piping and equipment. The guidelines cover a risk-based inspection methodology for CUI, inspection techniques (including non-destructive evaluation methods) and recommended best practice for mitigating CUI, including design of plant and equipment, coatings and the use of thermal spray techniques, types of insulation, cladding/jacketing materials and protection guards. The guidelines also include case studies. Guidelines cover inspection methodology for CUI, inspection techniques, including non-destructive evaluation methods and recommended best practice Case studies are included illustrating key points in the book

Book Materials for Architects and Builders

Download or read book Materials for Architects and Builders written by Arthur Lyons and published by Routledge. This book was released on 2014-08-21 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials for Architects and Builders provides a clear and concise introduction to the broad range of materials used within the construction industry and covers the essential details of their manufacture, key physical properties, specification and uses. Understanding the basics of materials is a crucial part of undergraduate and diploma construction or architecture-related courses, and this established textbook helps the reader to do just that with the help of colour photographs and clear diagrams throughout. This new edition has been completely revised and updated to include the latest developments in materials research, new images, appropriate technologies and relevant legislation. The ecological effects of building construction and lifetime use remain an important focus, and this new edition includes a wide range of energy saving building components.

Book MDI and TDI  Safety  Health and the Environment

Download or read book MDI and TDI Safety Health and the Environment written by D. C. Allport and published by John Wiley & Sons. This book was released on 2003-05-07 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: - MDI und TDI sind Diisocyanate, die industriell als Bausteine für Polymere verwendet werden, aber für die Gesundheit und die Umwelt nicht unbedenklich sind - erstmals werden hier Gesundheits- und Umweltrisiken von TDI und MDI gezielt in einem Band angesprochen - mit zahlreichen Photos, Spektren, Tabellen und Diagrammen - Beiträge von Experten aus Forschung, Industrie und Behörden

Book Handbook of Polymer Foams

Download or read book Handbook of Polymer Foams written by David Eaves and published by iSmithers Rapra Publishing. This book was released on 2004 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook reviews the chemistry, manufacturing methods, properties and applications of the synthetic polymer foams used in most applications. In addition, a chapter is included on the fundamental principles, which apply to all polymer foams. There is also a chapter on the blowing agents used to expand polymers and a chapter is on microcellular foams - a relatively new development where applications are still being explored.

Book Strategies for Sustainable Architecture

Download or read book Strategies for Sustainable Architecture written by Paola Sassi and published by Taylor & Francis. This book was released on 2006-09-27 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling a gap in existing literature on sustainable design, this new guide introduces and illustrates sustainable design principles through detailed case studies of sustainable buildings in Europe, North America and Australia. The guide will provide the reader with a deeper understanding of the design issues involved in delivering sustainable buildings, and giving detailed description of the process of integrating principles into practice. Approximately one hundred case studies of sixty buildings, ranging from small dwellings to large commercial buildings, and drawn from a range of countries, demonstrate best current practice. The sections of the book are divided into design issues relating to sustainable development, including site and ecology, community and culture, health, materials, energy and water. With over 400 illustrations, this highly visual guide will be an invaluable reference to all those concerned with architecture and sustainability issues.

Book Insulating Materials

    Book Details:
  • Author : Margit Pfundstein
  • Publisher : Walter de Gruyter
  • Release : 2012-12-10
  • ISBN : 3034614756
  • Pages : 114 pages

Download or read book Insulating Materials written by Margit Pfundstein and published by Walter de Gruyter. This book was released on 2012-12-10 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die Bedeutung von Dämmstoffen ist ungebrochen hoch. Das Angebot steigt kontinuierlich. Durch ihre wärmedämmende Wirkung tragen sie zur Einsparung von Heiz- und Kühlenergie sowie zur Reduktion des CO2-Austoßes bei. Detail Practice Insulating Materials bietet einen umfassenden Katalog von Dämmstoffen für den Hochbau. Erläuterungen zu den einzelnen Dämmstoffarten geben Aufschluss über enthaltene Rohstoffe, typische Eigenschaften, Anwendungsbereiche und Lieferformen. Tabellen mit physikalischen Kennwerten und Angaben zum Brandverhalten sowie Hinweise zur Gesundheits- und Umweltverträglichkeit machen die Dämmstoffe vergleichbar. Ein Überblick über die europäischen Rechtsvorschriften sowie Dämmstoffnormen mit Erläuterungen zur Produktkennzeichnung und -zertifizierung hilft bei der Planung und Ausschreibung. Für die Auswahl des passenden Dämmstoffes werden Kriterien für Konstruktion und Anwendung vorgestellt. Ergänzend hierzu eröffnet die differenzierte Betrachtung der ökologischen Wirkungen von Dämmstoffen ein großes Optimierungspotenzial für ihren nachhaltigen Einsatz.

Book Flexible Polyurethane Foams

Download or read book Flexible Polyurethane Foams written by Chris Defonseka and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-08-05 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Flexible and viscoelastic polyurethane foams have enormous potential as viable business ventures and have replaced many traditional materials used in everyday life. This book describes the chemistry of flexible and viscoelastic polyurethane foams as well as calculations and formulating methodology for quality production. The author presents detailed information on foam manufacturing, based on over 45 years of hands-on industry experience.

Book Additives for Coatings

    Book Details:
  • Author : Johan Bieleman
  • Publisher : John Wiley & Sons
  • Release : 2008-09-26
  • ISBN : 3527613315
  • Pages : 390 pages

Download or read book Additives for Coatings written by Johan Bieleman and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: No doubt: A perfect coating has to look brilliant! But other properties of coatings are also most important. Coatings have to be durable, tough and easily applicable. Additives are the key to success in achieving these characteristics, even though the amounts used in coating formulations are small. It is not trivial at all to select the best additives. In practice, many series of tests are often necessary, and the results do not explain, why a certain additive improves the quality of a coating and another one impairs the coating. This book is dedicated to developers and applicants of coatings working in research or production, and it is aimed at providing a manual for their daily work. It will answer the following questions: How do the most important groups of additives act? Which effects can be be achieved by their addition? Scientific theories are linked to practical applications. Emphasis is put on the optical aspects that are most important for the applications in practice. This book is a milestone in quality assurance in the complete field of coatings!

Book Man made Vitreous Fibres

    Book Details:
  • Author : IARC Working Group on the Evaluation of Carcinogenic Risks to Humans
  • Publisher : World Health Organization
  • Release : 2002
  • ISBN : 9283212819
  • Pages : 434 pages

Download or read book Man made Vitreous Fibres written by IARC Working Group on the Evaluation of Carcinogenic Risks to Humans and published by World Health Organization. This book was released on 2002 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This publication represents the views and expert opinions of an IARC working group on the evaluation of carcinogenic risks to humans, which met in Lyon, 9-16 October 2001."

Book Polymeric Foams

Download or read book Polymeric Foams written by Shau-Tarng Lee and published by CRC Press. This book was released on 2004-05-27 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the inaugural volume a series entitled Polymeric Foams: Technology and Applications. Generally, thermoplastic and thermoset foams have been treated as two separate practices in industry. Polymeric Foams: Mechanisms and Materials presents the basics of foaming in general build a strong foundation to those working in both thermoplastic a

Book Mineral Wool

Download or read book Mineral Wool written by B Sirok and published by Woodhead Publishing. This book was released on 2008-05-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mineral wool has a unique range of properties combining high thermal resistance with long-term stability. It is made from molten glass, stone or slag that is spun into a fibre-like structure which creates a combination of properties that no other insulation material can match. It has the ability to save energy, minimize pollution, combat noise, reduce the risk of fire and protect life and property in the event of fire. Mineral wool: Production and properties describes the technological process of mineral wool production and the physical characteristics of the melt and theoretical bases of multiregression and dimensionless theory. This is followed by the introduction of the fibre cooling model in the blow-away flow and the influence of temperature in the melt film (on the rotating centrifuge wheels) on the thickness of forming fibres. The second part predominantly focuses on the use of computer-aided visualisation: tools for the diagnostics of fibre and primary layer formation. Special attention is given to the study of aerodynamic characteristics of the airflow which significantly influences the quality of the final product. Mineral wool: Production and properties is suitable for engineers, researchers and for graduate and postgraduate students who want to broaden their knowledge of experimental methods in this field.

Book Encyclopedic Dictionary of Polymers

Download or read book Encyclopedic Dictionary of Polymers written by Jan W. Gooch and published by Springer Science & Business Media. This book was released on 2010-11-08 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference, in its second edition, contains more than 7,500 polymeric material terms, including the names of chemicals, processes, formulae, and analytical methods that are used frequently in the polymer and engineering fields. In view of the evolving partnership between physical and life sciences, this title includes an appendix of biochemical and microbiological terms (thus offering previously unpublished material, distinct from all competitors.) Each succinct entry offers a broadly accessible definition as well as cross-references to related terms. Where appropriate to enhance clarity further, the volume's definitions may also offer equations, chemical structures, and other figures. The new interactive software facilitates easy access to a large database of chemical structures (2D/3D-view), audio files for pronunciation, polymer science equations and many more.

Book Ecohouse  A Design Guide

Download or read book Ecohouse A Design Guide written by Christoper Day and published by Routledge. This book was released on 2007-08-15 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ecohouse is an exciting and timely text that tells you how to design low energy, environmentally friendly buildings today. It also provides the foundations for building design in a warming world, and stepping stones towards the zero-carbon emission buildings of tomorrow. Sue Roaf is famed for her approach to design and her awareness of energy efficiency. Here she reveals the concepts, structures and techniques that lie behind the realization of her ideals. By using her own house as a case-study Roaf guides the reader through the ideas for energy efficient design or 'eco design'. This guide to the ecohouse also explores 21 case-studies from around the world, from Norway and Sweden to India and Japan, Argentina and Mexico. Chapters by Christopher Day, Katerine Bohn and Andre Viljoen on ecological building materials and methods and a contribution by Robert and Brenda Vale - all experts in this field Ecohouse has a regularly updated companion web site providing further information on all issues relating to Ecohouse and eco design. Log on to www.bh.com/companions/ecohouse for a direct link.