Download or read book External Thermal Insulation Composite Systems ETICS written by Eva Barreira and published by Springer. This book was released on 2015-10-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book analyzes the hygrothermal behaviour of external thermal insulation composite systems (ETICS), components that increase the thermal efficiency of buildings. Treating a topic that has largely been neglected, it explores the main cause of biological growth within ETICS. The results of two experimental test series are presented: (i) a long-term assessment of four façades covered with ETICS and (ii) an evaluation of the factors affecting the façades’ hygrothermal behaviour. Furthermore, using a previously validated numerical model, it presents a sensitivity analysis of the hygrothermal behaviour of façades coated with ETICS. It also provides a methodology to assess the surface humidification of ETICS, which combines the effect of surface condensation, wind-driven rain and the drying process (three of the most prevalent parameters influencing the surface moisture content), which can then be used as a decision-support tool. ETICS are now frequently used in Europe to improve the thermal efficiency of buildings. Despite their advantages in terms of thermal efficiency, their low cost and their ease of application, these systems are adversely affected by microbiological growth, which causes defacement of cladding. Although the thermal and mechanical performance of the system is not impaired, biological defacement has an enormous aesthetic impact, affecting the inhabitants’ living experience and restricting the full implementation of this technology. External Thermal Insulation Composite Systems (ETICS): An Evaluation of Hygrothermal Behaviour provides a valuable resource to engineers and architects utilizing ETICS in their work, and for researchers and students interested in the hygrothermal behaviour of ETICS. It is also intended for those employed in industry and manufacturers of ETICS.
Download or read book Rules of Thumb for Mechanical Engineers written by J. Edward Pope and published by Gulf Professional Publishing. This book was released on 1997 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluids -- Heat transfer -- Thermodynamics -- Mechanical seals -- Pumps and compressors -- Drivers -- Gears -- Bearings -- Piping and pressure vessels -- Tribology -- Vibration -- Materials -- Stress and strain -- Fatigue -- Instrumentation -- Engineering economics.
Download or read book Handbook of Advanced Ceramics and Composites written by Yashwant Mahajan and published by Springer. This book was released on 2020-11-26 with total page 1527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents an authoritative account of the potential of advanced ceramics and composites in strategic applications, including defense, national security, aerospace, and energy security (especially nuclear energy). It highlights how their unique combination of superior properties such as low density, high strength, high elastic modulus, high hardness, high temperature capability, and excellent chemical and environmental stability are optimized in technologies within these fields. The handbook is organized according to application type. It allows readers to learn about strategies that have been used in different fields and to transfer them to their own. The book addresses a wide variety of ceramics and their composites, including PZT ceramics, carbon nanotubes, aerogels, silica radomes, relaxor ferroelectrics, and many others.
Download or read book Construction and Building Research written by Carmen Llinares-Millán and published by Springer Science & Business Media. This book was released on 2014-01-31 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many areas of knowledge converge in the building industry and therefore research in this field necessarily involves an interdisciplinary approach. Effective research requires strong relation between a broad variety of scientific and technological domains and more conventional construction or craft processes, while also considering advanced management processes, where all the main actors permanently interact. This publication takes an interdisciplinary approach grouping various studies on the building industry chosen from among the works presented for the 2nd International Conference on Construction and Building Research. The papers examine aspects of materials and building systems; construction technology; energy and sustainability; construction management; heritage, refurbishment and conservation. The information contained within these pages may be of interest to researchers and practitioners in construction and building activities from the academic sphere, as well as public and private sectors.
Download or read book Workshop Processes Practices and Materials written by Bruce Black and published by Routledge. This book was released on 2010-10-28 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Workshop Processes, Practices and Materials is an ideal introduction to workshop processes, practices and materials for entry-level engineers and workshop technicians. With detailed illustrations throughout and simple, clear language, this is a practical introduction to what can be a very complex subject. It has been significantly updated and revised to include new material on adhesives, protective coatings, plastics and current Health and Safety legislation. It covers all the standard topics, including safe practices, measuring equipment, hand and machine tools, materials and joining methods, making it an indispensable handbook for use both in class and the workshop. Its broad coverage makes it a useful reference book for many different courses worldwide.
Download or read book 10th International Conference on FRP Composites in Civil Engineering written by Alper Ilki and published by Springer Nature. This book was released on 2021-11-26 with total page 2516 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of FRP composites and structures, as presented by leading international researchers and engineers at the 10th International Conference on Fibre-Reinforced Polymer (FRP) Composites in Civil Engineering (CICE), held in Istanbul, Turkey on December 8-10, 2021. It covers a diverse range of topics such as All FRP structures; Bond and interfacial stresses; Concrete-filled FRP tubular members; Concrete structures reinforced or pre-stressed with FRP; Confinement; Design issues/guidelines; Durability and long-term performance; Fire, impact and blast loading; FRP as internal reinforcement; Hybrid structures of FRP and other materials; Materials and products; Seismic retrofit of structures; Strengthening of concrete, steel, masonry and timber structures; and Testing. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Sustainable Building Design for Tropical Climates written by Federico Butera and published by . This book was released on 2014 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Getty Seismic Adobe Project 2006 Colloquium written by Mary Hardy and published by . This book was released on 2010-06-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: During this three-day colloquium, presented by the Getty Conservation Institute (GCI), a group of professionals with expertise in earthen conservation, materials science, construction, building standards, and earthquake engineering gathered to discuss the current state of knowledge and the challenges of preserving our earthen cultural heritage in active seismic zones. This publication contains a selection of papers presented at the colloquium, as well as several later submissions by participants. For more information on the Getty Conservation Institute's work with earthen architecture, visit the Earthen Architecture Initiative Web site at www.getty.edu/conservation/field_projects/earthen/.
Download or read book Deep Energy Retrofit written by Alexander Zhivov and published by Springer Nature. This book was released on 2020-07-13 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides detailed information on how to set up Deep Energy Retrofits (DERs) in public buildings, and shares in-depth insights into the current status of the major technologies, strategies and best practice examples of how to cost-effectively combine them. Case studies from the U.S.A. and Europe show that that Deep Energy Retrofit can be achieved with a limited core technologies bundle readily available on the market. Characteristics of some of these core technology measures depend on the technologies available on an individual nation’s market, on the minimum requirements of national standards, and on economics (as determined by a life cycle cost analysis). Also, requirements to building envelope-related technologies (e.g., insulation levels, windows, vapor and water barriers, and requirements for building airtightness) depend on specific climate conditions. This Guide provides best practice examples of how to apply these technologies in different construction situations. High levels of energy use reduction using core technology bundles along with improvements in indoor climate and thermal comfort can be only achieved when a Deep Energy Retrofit adopts a quality assurance process. In addition to design, construction, commissioning, and post-occupancy phases of the quality assurance process, the Guide emphasizes the importance of clearly and concisely formulating and documenting the Owner’s goals, expectations, and requirements for the renovated building during development of the statement of work. Another important component of the quality assurance process is a procurement phase, during which bidders’ qualifications, their understanding of the scope of work and its requirements, and their previous experience are analyzed. The building sector holds the potential for tremendous improvements in terms of energy efficiency and reducing carbon emissions, and energy retrofits to the existing building stock represent a significant opportunity in the transition to a low-carbon future. Moreover, investing in highly efficient building materials and systems can replace long-term energy imports, contribute to cost cutting, and create a wealth of new jobs. Yet, while the technologies needed in order to improve energy efficiency are readily available, significant progress has not yet been made, and “best practices” for implementing building technologies and renewable energy sources are still relegated to small “niche” applications. Offering essential information on Deep Energy Retrofits, the book offers a valuable asset for architects, public authorities, project developers, and engineers alike.
Download or read book The Conservation of Artifacts Made from Plant Materials written by Mary-Lou E. Florian and published by Getty Publications. This book was released on 1991-03-21 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This teaching guide covers the identification, deterioration, and conservation of artifacts made from plant materials. Detailed information on plant anatomy, morphology, and development, focusing on information useful to the conservator in identifying plant fibers are described, as well as the processing, construction, and decorative techniques commonly used in such artifacts. A final chapter provides a thorough discussion of conservation, preservation, storage, and restoration methods. This is a valuable resource to conservators and students alike.
Download or read book Durability of Building Materials and Components written by Vasco Peixoto de de Freitas and published by Springer Science & Business Media. This book was released on 2013-07-16 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Durability of Building Materials and Components provides a collection of recent research works to contribute to the systematization and dissemination of knowledge related to the long-term performance and durability of construction and, simultaneously, to show the most recent advances in this domain. It includes a set of new developments in the field of durability, service life prediction methodologies, the durability approach for historical and old buildings, asset and maintenance management and on the durability of materials, systems and components. The book is divided in several chapters that intend to be a resume of the current state of knowledge for benefit of professional colleagues.
Download or read book Cement Production Technology written by Anjan Kumar Chatterjee and published by CRC Press. This book was released on 2018-04-27 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is an outcome of the author’s active professional involvement in research, manufacture and consultancy in the field of cement chemistry and process engineering. This multidisciplinary title on cement production technology covers the entire process spectrum of cement production, starting from extraction and winning of natural raw materials to the finished products including the environmental impacts and research trends. The book has an overtone of practice supported by the back-up principles.
Download or read book Ecological Wisdom Inspired Restoration Engineering written by Varenyam Achal and published by Springer. This book was released on 2018-08-24 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on ecological wisdom inspired restoration engineering through theories, hypotheses, policies, practical understanding, and case studies. Understanding nature’s processes is a prerequisite for the healthy and sustainable functioning of a habitable Earth. As such, the book provides a guide for readers seeking to understand and build sustainable, urban socio-ecological systems using restoration technologies based on wisdom. Motivated by recent rapid advances in restoration engineering, such as the role of green building materials in urban infrastructures, and developing sustainable landscapes to benefit the environment, economy and communities, it is an essential reference on the most promising innovative technologies. It discusses engineering methods and practices in the restoration of soil, water, heritage sites, and other ecosystems, as well as the development and applications of green building materials. It presents a holistic and systematic approach that utilizes natural resources and the concept of ecological wisdom to reap sustainable environmental, economic and social benefits to fulfill the concept of living in harmony with nature. This book is a valuable resource for civil- and environmental engineering researchers as well as organizations engaged in eco-restoration practices.
Download or read book Environmental Impacts of Traditional and Innovative Forest based Bioproducts written by Andreja Kutnar and published by Springer. This book was released on 2016-03-21 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive description of traditional and innovative forest-based bioproducts, from pulp and paper, wood-based composites and wood fuels to chemicals and fiber-based composites. The descriptions of different types of forest-based bioproducts are supplemented by the environmental impacts involved in their processing, use, and end-of-life phase. Further, the possibility of reusing, recycling and upgrading bioproducts at the end of their projected life cycle is discussed. As the intensity of demand for forest biomass is currently changing, forest-based industries need to respond with innovative products, business models, marketing and management. As such, the book concludes with a chapter on the bioproducts business and these products’ role in bioeconomies.
Download or read book Principles of Biomedical Engineering Second Edition written by Sundararajan Madihally and published by Artech House. This book was released on 2019-12-31 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition of an Artech House classic introduces readers to the importance of engineering in medicine. Bioelectrical phenomena, principles of mass and momentum transport to the analysis of physiological systems, the importance of mechanical analysis in biological tissues/ organs and biomaterial selection are discussed in detail. Readers learn about the concepts of using living cells in various therapeutics and diagnostics, compartmental modeling, and biomedical instrumentation. The book explores fluid mechanics, strength of materials, statics and dynamics, basic thermodynamics, electrical circuits, and material science. A significant number of numerical problems have been generated using data from recent literature and are given as examples as well as exercise problems. These problems provide an opportunity for comprehensive understanding of the basic concepts, cutting edge technologies and emerging challenges. Describing the role of engineering in medicine today, this comprehensive volume covers a wide range of the most important topics in this burgeoning field. Moreover, you find a thorough treatment of the concept of using living cells in various therapeutics and diagnostics. Structured as a complete text for students with some engineering background, the book also makes a valuable reference for professionals new to the bioengineering field. This authoritative textbook features numerous exercises and problems in each chapter to help ensure a solid understanding of the material.
Download or read book Hemp Lime Construction written by Rachel Bevan and published by Building Research Establishment. This book was released on 2008 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive guidance on using hemp lime for housing and low-rise buildings is given for the first time in this book, which is full of practical information on materials, design and construction.
Download or read book Fabrication and Welding Engineering written by Roger Timings and published by Routledge. This book was released on 2008 with total page 597 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers basic sheet-metal fabrication and welding engineering principles and applications. This title includes chapters on non-technical but essential subjects such as health and safety, personal development and communication of technical information. It contains illustrations that demonstrate the practical application of the procedures described.
