Download or read book Thermally Conductive Polymer Composites written by Junwei Gu and published by Elsevier. This book was released on 2023-01-20 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermally Conductive Polymer Composites provides an important introduction to the key principles, methods, and research directions of this emerging thermal management material category. This book introduces thermal conduction, measurement methods, thermal conduction mechanisms, and related theories. It also reviews classification and processing techniques which impact thermal conductivity performance. Thermally conductive composites discussed include intrinsically thermally conductive polymers, thermally conductive fillers, and thermally conductive polymer composites. Furthermore, the interfacial thermal resistance is thoroughly explained including basic concepts, theoretical research, and characterization. Finally, the practical applications of thermally conductive polymer composites are illustrated such as thermally conductive plastics, thermally conductive rubbers, and thermally conductive adhesives. - Covers measurement methods, thermal conductivity mechanisms and models - Introduces thermally conductive polymers, intrinsically thermal conductors, fillers and composites, as well as interfaces - Reviews advances in classification and processing techniques
Download or read book 21st Century Nanoscience A Handbook written by Klaus D. Sattler and published by CRC Press. This book was released on 2020-04-02 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 21st Century Nanoscience Handbook will be the most comprehensive, up-to-date large reference work for the field of nanoscience. Handbook of Nanophysics, by the same editor, published in the fall of 2010, embraced as the first comprehensive reference to consider both fundamental and applied aspects of nanophysics. This follow-up project has been conceived as a necessary expansion and full update that considers the significant advances made in the field since 2010. It goes well beyond the physics as warranted by recent developments in the field. The fifth volume in a ten-volume set covers exotic nanostructures and quantum systems. Key Features: Provides the most comprehensive, up-to-date large reference work for the field. Chapters written by international experts in the field. Emphasises presentation and real results and applications. This handbook distinguishes itself from other works by its breadth of coverage, readability and timely topics. The intended readership is very broad, from students and instructors to engineers, physicists, chemists, biologists, biomedical researchers, industry professionals, governmental scientists, and others whose work is impacted by nanotechnology. It will be an indispensable resource in academic, government, and industry libraries worldwide. The fields impacted by nanoscience extend from materials science and engineering to biotechnology, biomedical engineering, medicine, electrical engineering, pharmaceutical science, computer technology, aerospace engineering, mechanical engineering, food science, and beyond.
Download or read book 21st Century Nanoscience written by Klaus D. Sattler and published by CRC Press. This book was released on 2022-01-18 with total page 4153 pages. Available in PDF, EPUB and Kindle. Book excerpt: This 21st Century Nanoscience Handbook will be the most comprehensive, up-to-date large reference work for the field of nanoscience. Handbook of Nanophysics, by the same editor, published in the fall of 2010, was embraced as the first comprehensive reference to consider both fundamental and applied aspects of nanophysics. This follow-up project has been conceived as a necessary expansion and full update that considers the significant advances made in the field since 2010. It goes well beyond the physics as warranted by recent developments in the field. Key Features: Provides the most comprehensive, up-to-date large reference work for the field. Chapters written by international experts in the field. Emphasises presentation and real results and applications. This handbook distinguishes itself from other works by its breadth of coverage, readability and timely topics. The intended readership is very broad, from students and instructors to engineers, physicists, chemists, biologists, biomedical researchers, industry professionals, governmental scientists, and others whose work is impacted by nanotechnology. It will be an indispensable resource in academic, government, and industry libraries worldwide. The fields impacted by nanoscience extend from materials science and engineering to biotechnology, biomedical engineering, medicine, electrical engineering, pharmaceutical science, computer technology, aerospace engineering, mechanical engineering, food science, and beyond.
Download or read book Nanoscale Energy Transport and Conversion written by Gang Chen and published by Oxford University Press. This book was released on 2005-03-03 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a graduate level textbook in nanoscale heat transfer and energy conversion that can also be used as a reference for researchers in the developing field of nanoengineering. It provides a comprehensive overview of microscale heat transfer, focusing on thermal energy storage and transport. Chen broadens the readership by incorporating results from related disciplines, from the point of view of thermal energy storage and transport, and presents related topics on the transport of electrons, phonons, photons, and molecules. This book is part of the MIT-Pappalardo Series in Mechanical Engineering.
Download or read book Gold Nanostars written by Giuseppe Chirico and published by Springer. This book was released on 2015-08-03 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Brief focuses on the synthesis, functionalization techniques, optical properties and biomedical application of gold nanostars (GNS). Various facilities of gold nanostars synthesis as well as functionalization of GNS with PEG, organic dyes, bioactive compounds are discussed. The authors discuss physical origin of the Localized Surface Plasmon Resonances and the way the nano-environment affects them. The implication of the LSPR of gold nanostars surface enhanced Raman scattering is also discussed. The emphasis has been done on the application of GNS for current and emerge needs of medicine, biology and pharmacy. Moreover, properties of gold nanostars as contrast agents for in vivo imaging and interaction of GNS with cells are also discussed in this Brief.
Download or read book Multilayer Thin Films written by Sukumar Basu and published by BoD – Books on Demand. This book was released on 2020-01-15 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, "Multilayer Thin Films-Versatile Applications for Materials Engineering", includes thirteen chapters related to the preparations, characterizations, and applications in the modern research of materials engineering. The evaluation of nanomaterials in the form of different shapes, sizes, and volumes needed for utilization in different kinds of gadgets and devices. Since the recently developed two-dimensional carbon materials are proving to be immensely important for new configurations in the miniature scale in the modern technology, it is imperative to innovate various atomic and molecular arrangements for the modifications of structural properties. Of late, graphene and graphene-related derivatives have been proven as the most versatile two-dimensional nanomaterials with superb mechanical, electrical, electronic, optical, and magnetic properties. To understand the in-depth technology, an effort has been made to explain the basics of nano dimensional materials. The importance of nano particles in various aspects of nano technology is clearly indicated. There is more than one chapter describing the use of nanomaterials as sensors. In this volume, an effort has been made to clarify the use of such materials from non-conductor to highly conducting species. It is expected that this book will be useful to the postgraduate and research students as this is a multidisciplinary subject.
Download or read book Measurement Techniques for Thin Films written by Bertram Schwartz and published by . This book was released on 1967 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer written by Aziz Belmiloudi and published by BoD – Books on Demand. This book was released on 2011-01-28 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades there has been a prolific increase in research and development in area of heat transfer, heat exchangers and their associated technologies. This book is a collection of current research in the above mentioned areas and discusses experimental, theoretical and calculation approaches and industrial utilizations with modern ideas and methods to study heat transfer for single and multiphase systems. The topics considered include various basic concepts of heat transfer, the fundamental modes of heat transfer (namely conduction, convection and radiation), thermophysical properties, condensation, boiling, freezing, innovative experiments, measurement analysis, theoretical models and simulations, with many real-world problems and important modern applications. The book is divided in four sections : "Heat Transfer in Micro Systems", "Boiling, Freezing and Condensation Heat Transfer", "Heat Transfer and its Assessment", "Heat Transfer Calculations", and each section discusses a wide variety of techniques, methods and applications in accordance with the subjects. The combination of theoretical and experimental investigations with many important practical applications of current interest will make this book of interest to researchers, scientists, engineers and graduate students, who make use of experimental and theoretical investigations, assessment and enhancement techniques in this multidisciplinary field as well as to researchers in mathematical modelling, computer simulations and information sciences, who make use of experimental and theoretical investigations as a means of critical assessment of models and results derived from advanced numerical simulations and improvement of the developed models and numerical methods.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Compendium of Thermophysical Property Measurement Methods written by A. Cezairliyan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 639 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on the extensive coverage of the first volume, Volume 2 focuses on the fundamentals of measurements and computational techniques that will aid researchers in the construction and use of measurement devices.
Download or read book Thermal Analysis of Materials written by Robert Speyer and published by CRC Press. This book was released on 1993-09-16 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing the design and optimum use of thermal analysis instrumentation for materials' property measurement, this work details how the instruments work, what they measure, potential pitfalls and the fitting of experimental results to theoretical models. It presents a tutorial on writing computer programs for data manipulation, advanced thermoanalytical methods and case studies.
Download or read book Oxide Semiconductors Volume 1633 written by Steve Durbin and published by Materials Research Society. This book was released on 2014-07-14 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symposium R, "Oxide Semiconductors" was held December 1-6 at the 2013 MRS Fall Meeting in Boston, Massachusetts. Oxide semiconductors are poised to take a more active role in modern electronics, particularly in the field of thin film transistors. While many advances have been made in terms of our understanding of fundamental optical and electronic characteristics, there remain many questions in terms of defects, doping, and optimal growth/synthesis conditions. This symposium proceedings volume represents recent advances in growth and characterization of a number of different oxide semiconductors, as well as device fabrication.
Download or read book Introduction to Thermoelectricity written by H. Julian Goldsmid and published by Springer Science & Business Media. This book was released on 2009-10-03 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Thermoelectricity is the latest work by Professor Julian Goldsmid drawing on his 55 years experience in the field. The theory of the thermoelectric and related phenomena is presented in sufficient detail to enable researchers to understand their observations and develop improved thermoelectric materials. The methods for the selection of materials and their improvement are discussed. Thermoelectric materials for use in refrigeration and electrical generation are reviewed. Experimental techniques for the measurement of properties and for the production of thermoelements are described. Special emphasis is placed on nanotechnology which promises to yield great improvements in the efficiency of thermoelectric devices. Chapters are also devoted to transverse thermoelectric effects and thermionic energy conversion, both techniques offering the promise of important applications in the future.
Download or read book Thermal Conductivity written by Terry M. Tritt and published by Springer Science & Business Media. This book was released on 2006-10-03 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: It has been almost thirty years since the publication of a book that is entirely dedicated to the theory, description, characterization and measurement of the thermal conductivity of solids. The recent discovery of new materials which possess more complex crystal structures and thus more complicated phonon scattering mechanisms have brought innovative challenges to the theory and experimental understanding of these new materials. With the development of new and novel solid materials and new measurement techniques, this book will serve as a current and extensive resource to the next generation researchers in the field of thermal conductivity. This book is a valuable resource for research groups and special topics courses (8-10 students), for 1st or 2nd year graduate level courses in Thermal Properties of Solids, special topics courses in Thermal Conductivity, Superconductors and Magnetic Materials, and to researchers in Thermoelectrics, Thermal Barrier Materials and Solid State Physics.
Download or read book Thermoelectric Thin Films written by Paolo Mele and published by Springer. This book was released on 2019-07-17 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will provide readers with deep insight into the intriguing science of thermoelectric thin films. It serves as a fundamental information source on the techniques and methodologies involved in thermoelectric thin film growth, characterization and device processing. This book involves widespread contributions on several categories of thermoelectric thin films: oxides, chalcogenides, iodates, nitrides and polymers. This will serve as an invaluable resource for experts to consolidate their knowledge and will provide insight and inspiration to beginners wishing to learn about thermoelectric thin films. Provides a single-source reference on a wide spectrum of topics related to thermoelectric thin films, from organic chemistry to devices, from physical chemistry to applied physics, from synthesis to device implementation; Covers several categories of thermoelectric thin films based on different material approaches such as oxides, chalcogenides, iodates, nitrides and polymers; Discusses synthesis, characterization, and device processing of thermoelectric thin films, as well as the nanoengineering approach to tailor the properties of the used materials at the nanoscale level.
Download or read book Journal of Heat Transfer written by and published by . This book was released on 2002 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thin Film Silicon Solar Cells written by Arvind Shah and published by EPFL Press. This book was released on 2010-08-19 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic technology has now developed to the extent that it is close to fulfilling the vision of a "solar-energy world," as devices based on this technology are becoming efficient, low-cost and durable. This book provides a comprehensive treatment of thin-film silicon, a prevalent PV material, in terms of its semiconductor nature, starting out with the physical properties, but concentrating on device applications. A special emphasis is given to amorphous silicon and microcrystalline silicon as photovoltaic materials, along with a model that allows these systems to be physically described in the simplest manner possible, thus allowing the student or scientist/engineer entering the field of thin-film electronics to master a few basic concepts that are distinct from those in the field of conventional semiconductors. The main part of the book deals with solar cells and modules by illustrating the basic functioning of these devices, along with their limitations, design optimization, testing and fabrication methods. Among the manufacturing processes discussed are plasma-assisted and hot-wire deposition, sputtering, and structuring techniques.
