Download or read book Turbulent Premixed Flames written by Nedunchezhian Swaminathan and published by Cambridge University Press. This book was released on 2011-04-25 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: A work on turbulent premixed combustion is important because of increased concern about the environmental impact of combustion and the search for new combustion concepts and technologies. An improved understanding of lean fuel turbulent premixed flames must play a central role in the fundamental science of these new concepts. Lean premixed flames have the potential to offer ultra-low emission levels, but they are notoriously susceptible to combustion oscillations. Thus, sophisticated control measures are inevitably required. The editors' intent is to set out the modeling aspects in the field of turbulent premixed combustion. Good progress has been made on this topic, and this cohesive volume contains contributions from international experts on various subtopics of the lean premixed flame problem.
Download or read book Turbulent Combustion written by Norbert Peters and published by Cambridge University Press. This book was released on 2000-08-15 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The combustion of fossil fuels remains a key technology for the foreseeable future. It is therefore important that we understand the mechanisms of combustion and, in particular, the role of turbulence within this process. Combustion always takes place within a turbulent flow field for two reasons: turbulence increases the mixing process and enhances combustion, but at the same time combustion releases heat which generates flow instability through buoyancy, thus enhancing the transition to turbulence. The four chapters of this book present a thorough introduction to the field of turbulent combustion. After an overview of modeling approaches, the three remaining chapters consider the three distinct cases of premixed, non-premixed, and partially premixed combustion, respectively. This book will be of value to researchers and students of engineering and applied mathematics by demonstrating the current theories of turbulent combustion within a unified presentation of the field.
Download or read book Fundamentals of Premixed Turbulent Combustion written by Andrei Lipatnikov and published by CRC Press. This book was released on 2012-10-24 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lean burning of premixed gases is considered to be a promising combustion technology for future clean and highly efficient gas turbine combustors. Yet researchers face several challenges in dealing with premixed turbulent combustion, from its nonlinear multiscale nature and the impact of local phenomena to the multitude of competing models. Filling
Download or read book Fundamentals of Turbulent and Multiphase Combustion written by Kenneth Kuan-yun Kuo and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailed coverage of advanced combustion topics from the author of Principles of combustion, Second Edition Turbulence, turbulent combustion, and multiphase reacting flows have become major research topics in recent decades due to their application across diverse fields, including energy, environment, propulsion, transportation, industrial safety, and nanotechnology. Most of the knowledge accumulated from this research has never been published in book form—until now. Fundamentals of Turbulent and Multiphase Combustion presents up-to-date, integrated coverage of the fundamentals of turbulence, combustion, and multiphase phenomena along with useful experimental techniques, including non-intrusive, laser-based measurement techniques, providing a firm background in both contemporary and classical approaches. Beginning with two full chapters on laminar premixed and non-premixed flames, this book takes a multiphase approach, beginning with more common topics and moving on to higher-level applications. In addition, Fundamentals of Turbulent and Multiphase Combustion: Addresses seven basic topical areas in combustion and multiphase flows, including laminar premixed and non-premixed flames, theory of turbulence, turbulent premixed and non-premixed flames, and multiphase flows Covers spray atomization and combustion, solid-propellant combustion, homogeneous propellants, nitramines, reacting boundary-layer flows, single energetic particle combustion, and granular bed combustion Provides experimental setups and results whenever appropriate Supported with a large number of examples and problems as well as a solutions manual, Fundamentals of Turbulent and Multiphase Combustion is an important resource for professional engineers and researchers as well as graduate students in mechanical, chemical, and aerospace engineering.
Download or read book Recent Advances in the Aerospace Sciences written by Corrado Casci and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, published in honor of Prof. Luigi Crocco, appears when Luigi Crocco celebrates his 75th birthday of a life devoted to study, research, and teaching. The events in his life and World War II forced Luigi Crocco, as well as other Italian scientists, to look to foreign countries for the calm haven so vital to study. This notwithstanding, his scientific activity was never inter rupted, and this volume is an acknowledgment of scientists and researchers to his work and life. Prefazione Questo volume in onore del prof. ing. Luigi Crocco vede la luce quando Luigi Crocco compie i 75 anni di una vita dedicata allo studio, alia ricerca e all'insegnamento. a Le vicende della vita, ed anche della 2 guerra mondiale, hanno costretto Luigi Crocco, come altri scienziati italiani, a dover cercare in altri Paesi quella serenita necessaria per dedicarsi allo studio. Ma la sua attivita scientifica non ha avuto interruzioni e questo volume essere la testimonianza di studiosi e di ricercatori alia sua opera e alia sua vita."
Download or read book Encyclopedic Dictionary of Polymers written by Jan W. Gooch and published by Springer Science & Business Media. This book was released on 2010-11-08 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference, in its second edition, contains more than 7,500 polymeric material terms, including the names of chemicals, processes, formulae, and analytical methods that are used frequently in the polymer and engineering fields. In view of the evolving partnership between physical and life sciences, this title includes an appendix of biochemical and microbiological terms (thus offering previously unpublished material, distinct from all competitors.) Each succinct entry offers a broadly accessible definition as well as cross-references to related terms. Where appropriate to enhance clarity further, the volume's definitions may also offer equations, chemical structures, and other figures. The new interactive software facilitates easy access to a large database of chemical structures (2D/3D-view), audio files for pronunciation, polymer science equations and many more.
Download or read book Unsteady Combustor Physics written by Tim C. Lieuwen and published by Cambridge University Press. This book was released on 2021-10-21 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore a unified treatment of the dynamics of combustor systems, including acoustics, fluid mechanics, and combustion in a single rigorous text. This updated new edition features an expansion of data and experimental material, updates the coverage of flow stability, and enhanced treatment of flame dynamics. Addresses system dynamics of clean energy and propulsion systems used in low emissions systems. Synthesizing the fields of fluid mechanics and combustion into a coherent understanding of the intrinsically unsteady processes in combustors. This is a perfect reference for engineers and researchers in fluid mechanics, combustion, and clean energy.
Download or read book Annual Research Briefs written by Center for Turbulence Research (U.S.) and published by . This book was released on 2007 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion Phenomena written by Jozef Jarosinski and published by CRC Press. This book was released on 2009-02-12 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extensively using experimental and numerical illustrations, CombustionPhenomena: Selected Mechanisms of Flame Formation, Propagation, and Extinction provides a comprehensive survey of the fundamental processes of flame formation, propagation, and extinction. Taking you through the stages of combustion, leading experts visually display, mathematically explain, and clearly theorize on important physical topics of combustion. After a historical introduction to the field, they discuss combustion chemistry, flammability limits, and spark ignition. They also study counterflow twin-flame configuration, flame in a vortex core, the propagation characteristics of edge flames, instabilities, and tulip flames. In addition, the book describes flame extinction in narrow channels, global quenching of premixed flames by turbulence, counterflow premixed flame extinction limits, the interaction of flames with fluids in rotating vessels, and turbulent flames. The final chapter explores diffusion flames as well as combustion in spark- and compression-ignition engines. It also examines the transition from deflagration to detonation, along with the detonation wave structure. With downloadable resources of images that beautifully illustrate a range of combustion phenomena, this book facilitates a practical understanding of the processes occurring in the conception, spread, and extinguishment of a flame. It will help you on your way to finding solutions to real issues encountered in transportation, power generation, industrial processes, chemical engineering, and fire and explosion hazards.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Turbulent Combustion Modeling written by Tarek Echekki and published by Springer Science & Business Media. This book was released on 2010-12-25 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent combustion sits at the interface of two important nonlinear, multiscale phenomena: chemistry and turbulence. Its study is extremely timely in view of the need to develop new combustion technologies in order to address challenges associated with climate change, energy source uncertainty, and air pollution. Despite the fact that modeling of turbulent combustion is a subject that has been researched for a number of years, its complexity implies that key issues are still eluding, and a theoretical description that is accurate enough to make turbulent combustion models rigorous and quantitative for industrial use is still lacking. In this book, prominent experts review most of the available approaches in modeling turbulent combustion, with particular focus on the exploding increase in computational resources that has allowed the simulation of increasingly detailed phenomena. The relevant algorithms are presented, the theoretical methods are explained, and various application examples are given. The book is intended for a relatively broad audience, including seasoned researchers and graduate students in engineering, applied mathematics and computational science, engine designers and computational fluid dynamics (CFD) practitioners, scientists at funding agencies, and anyone wishing to understand the state-of-the-art and the future directions of this scientifically challenging and practically important field.
Download or read book Modern Developments in Energy Combustion and Spectroscopy written by F.A. Williams and published by Elsevier. This book was released on 2013-10-22 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compendium of technical articles is dedicated to Professor Stanford Solomon Penner on the occasion of his 70th birthday. As one of the most prominent scientists of our times, he has been particularly instrumental in advancing the field of combustion science while simultaneously he has developed quantitative spectroscopy into an important engineering discipline, and is also a leading international expert on energy issues. Written primarily by researchers who were Professor Penner's doctorate students during the last four decades, the articles consist of original contributions as well as previously published papers that provide important insights into combustion, spectroscopy, and energy problems. Among the topics included are turbulent combustion, flame structure, detonations, spectroscopic diagnostics, spectroscopy of atmospheric gases, and physical problems associated with nuclear reactors as well as electric power distribution, and energy conversion. The book includes a short biography of Professor Penner and a complete bibliography of his publications.
Download or read book Combustion Waves and Fronts in Flows written by Paul Clavin and published by Cambridge University Press. This book was released on 2016-07-28 with total page 723 pages. Available in PDF, EPUB and Kindle. Book excerpt: A self-contained presentation of the dynamics of nonlinear waves in combustion and other non-equilibrium energetic systems for students and specialists.
Download or read book Modeling and Simulation of Turbulent Combustion written by Santanu De and published by Springer. This book was released on 2017-12-12 with total page 663 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive review of state-of-the-art models for turbulent combustion, with special emphasis on the theory, development and applications of combustion models in practical combustion systems. It simplifies the complex multi-scale and nonlinear interaction between chemistry and turbulence to allow a broader audience to understand the modeling and numerical simulations of turbulent combustion, which remains at the forefront of research due to its industrial relevance. Further, the book provides a holistic view by covering a diverse range of basic and advanced topics—from the fundamentals of turbulence–chemistry interactions, role of high-performance computing in combustion simulations, and optimization and reduction techniques for chemical kinetics, to state-of-the-art modeling strategies for turbulent premixed and nonpremixed combustion and their applications in engineering contexts.
Download or read book The Mathematics of Combustion written by John D. Buckmaster and published by SIAM. This book was released on 1985-01-01 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delves into the rapidly changing area of combustion, in which asymptotic methods and bifurcation theory have made a significant impact as have the constant-density, small-heat-release models and other important contributions.
Download or read book WADC Technical Report written by United States. Wright Air Development Division and published by . This book was released on 1956 with total page 1746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion Physics written by Michael A. Liberman and published by Springer Nature. This book was released on 2021-11-14 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest achievements and original research work in physics of combustion processes and application of the methods developed in combustion physics for astrophysical problems of stars burning, supernovae explosions and a confined thermonuclear fusion. All the materials in the book are presented in a concise and easily accessible way, but at the same time provides a deep physical inside in the phenomena considered. It is an effective theoretical course with the direct practical implications in engineering fields of engine’s development, energy production, safety issues inherent to terrestrial combustion, as well as in thermonuclear combustion in the inertial fusion. This book is aimed at university students, Ph.D. students and engineers, as well as professionals in combustion, energy-related research, astrophysics and researchers in neighboring fields.
