Download or read book Theory of Corrosion and Protection of Metals written by N. D. Tomashov and published by . This book was released on 1966 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anodic Protection written by Olen Riggs and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of this book are to give technical information about anodic pro tection, explain how economic analyses are made to determine whether or not it should be used, and describe some of the applications and equipment. Lim itations of the technique will be pointed out. Technological changes that have resulted in higher temperatures, pres sures, and velocities increase corrosion rates and markedly influence materials selection and design decisions. Continuous cycle systems impose increased demands on system reliability. New processes require more sophisticated equipment made of costlier metals which are often in short supply and subject to the vagaries of international commerce. The impact of continuing inflation influences decisions related to capital expenditures and maintenance costs. Some problems caused by these considerations can be solved, or solutions simplified, by the use of anodic protection. Technical and scientific information is presented on applications to industrial equipment, economics, design and installation, operation and maintenance, electrochemical principles, laboratory tests and procedures. A historical summary, patent list, glossary of terms, and a subject index are included. It is important to acknowledge that much of the information has been from the original work of others, including the publications of many friends.
Download or read book Corrosion and Protection of Metals written by David M Bastidas and published by . This book was released on 2020-09-16 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction and Scope-During the last few decades, an enormous effort has been made to understand corrosion phenomena and their mechanisms, and to elucidate the causes that dramatically influence the service lifetime of metal materials. The performance of metal materials in aggressive environments is critical for a sustainable society. The failure of the material in service impacts the economy, the environment, health, and society. In this regard, corrosion-based economic losses due to maintenance, repair, and the replacement of existing structures and infrastructure account for up to 4% of gross domestic product (GDP) in well developed countries. One of the biggest issues in corrosion engineering is estimating service lifetime. Corrosion prediction has become very difficult, as there is no direct correlation with service lifetime and experimental lab results, usually as a result of discrepancies between accelerated testing and real corrosion processes. It is of major interest to forecast the impact of corrosion-based losses on society and the global economy, since existing structures and infrastructure are becoming old, and crucial decisions now need to be made to replace them. On the other hand, environmental protocols seek to reduce greenhouse effects. Therefore, low emission policies, in force, establish regulations for the next generation of materials and technologies. Advanced technologies and emergent materials will enable us to get through the next century. Great advances are currently in progress for the development of corrosion-resistant metal materials for different sectors, such as energy, transport, construction, and health. This Special Issue on the corrosion and protection of metals is focused on current trends in corrosion science, engineering, and technology, ranging from fundamental to applied research, thus covering subjects related to corrosion mechanisms and modelling, protection and inhibition processes, and mitigation strategies.
Download or read book Theory of Corrosion and Protection of Metals written by Nikon Danilovich Tomashov and published by . This book was released on 1966 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrocorrosion and Protection of Metals written by Joseph Riskin and published by Elsevier. This book was released on 2008-11-07 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrocorrosion, the corrosion of metallic constructions by external currents, is the most significant factor in conductive aggressive environments. Corrosion of underground and underwater metal constructions by stray currents has been comprehensively studied in the past decades and is considered here only in the form of a review. The primary attention is on corrosion, by external anodic (mainly) and cathodic currents, of metal constructions in the highly aggressive environments typical for electrochemical plants, where penetration of the external currents (leakage currents) from the electrolytic baths into metal constructions is unavoidable. A new approach to the problem of electrocorrosion protection of passive structural metals is considered in this book, keeping the metals attacked by external currents in the boundaries of their passive field. The systems, developed in accordance with this approach, are based on the modification of existing and elaboration of new methods of electrocorrosion protection. These systems take into account corrosion and electrochemical characteristics of the aggressive media (redox potential, conductivity etc.) and of the passive metal (corrosion and activation potentials, current density in a passive state, etc) as well as the sizes and distribution character of the external currents. The book covers analysis of leakage current distributions in electrochemical plants, their influence, methods to estimate corrosion stability of metallic structures subject to external currents and presents many concrete examples of the successful introduction of corrosion protection systems in operating plants. A new approach to protection from electrocorrosion, taking into account the passive state of the metal in aggressive media Newly developed and modifications of well known methods of electrocorrosion protection are presented Systematized data on electrocorrosion and protection of metals, especially in electrochemical plants, allow corrosion engineers, researchers and personnel maintaining the equipment of electrochemical plants to analyze the corrosion state of metallic equipment and prevent electrocorrosion
Download or read book Materials Corrosion and Protection written by Yongchang Huang and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-02-05 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces corrosion mechanisms and protection technologies for metallic and non-metallic materials. A focus lies on the protection of high-tech materials with applications in space and environments exposed to unclear radiation and biological hazards. The determination, measurement and control of different corrosion mechanisms are discussed in detail. Combining theories with case studies, it is an essential reference for material scientists and engineers.
Download or read book Theory of Corrosion and Protection of Metals The Science of Corrosion translated from the Russian written by Tomashov ND. and published by . This book was released on 1966 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Corrosion and Protection of Metals written by Gösta Wranglén and published by . This book was released on 1972 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Metal Surface Treatment and Protection written by D. R. Gabe and published by Elsevier. This book was released on 2014-07-22 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Metal Surface Treatment and Protection deals with the principles of metal surface treatment and protection. Topics covered range from electrodeposition and hot dip coating to diffusion and non-metallic coatings, as well as oxide and conversion coatings. The theory of corrosion protection is also discussed. Comprised of eight chapters, this volume begins with an overview of the corrosion of metals and the scope of protection against corrosion, followed by a detailed treatment of electrodeposition. The discussion then turns to the principles of hot dipping as a coating method; the formation of a diffusion coating; and the role of a non-metallic coating in corrosion protection. Subsequent chapters focus on the protection of oxide films against corrosion by means of anodizing, phosphatizing, and the use of tin free steel; testing and selection of a particular coating for corrosion resistance applications; and the theory of corrosion protection. This book is intended for metal-finishing scientists and students of metallurgy and metal finishing.
Download or read book Handbook of Cathodic Corrosion Protection written by Walter von Baeckmann and published by Elsevier. This book was released on 1997-10-17 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook covers all aspects of cathodic protection in terms of both practice and theory.
Download or read book Principles of Modern Chemistry written by David W. Oxtoby and published by Harcourt Brace College Publishers. This book was released on 1998-07-01 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: PRINCIPLES OF MODERN CHEMISTRY has dominated the honors and high mainstream general chemistry courses and is considered the standard for the course. The fifth edition is a substantial revision that maintains the rigor of previous editions but reflects the exciting modern developments taking place in chemistry today. Authors David W. Oxtoby and H. P. Gillis provide a unique approach to learning chemical principles that emphasizes the total scientific process'from observation to application'placing general chemistry into a complete perspective for serious-minded science and engineering students. Chemical principles are illustrated by the use of modern materials, comparable to equipment found in the scientific industry. Students are therefore exposed to chemistry and its applications beyond the classroom. This text is perfect for those instructors who are looking for a more advanced general chemistry textbook.
Download or read book Theory of Corrosion and Protection of Metals written by Nikon D. Tomašov and published by . This book was released on 1967 with total page 6721 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles of Corrosion Engineering and Corrosion Control written by Zaki Ahmad and published by Elsevier. This book was released on 2006-09-18 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is a huge issue for materials, mechanical, civil and petrochemical engineers. With comprehensive coverage of the principles of corrosion engineering, this book is a one-stop text and reference for students and practicing corrosion engineers. Highly illustrated, with worked examples and definitions, it covers basic corrosion principles, and more advanced information for postgraduate students and professionals. Basic principles of electrochemistry and chemical thermodynamics are incorporated to make the book accessible for students and engineers who do not have prior knowledge of this area. Each form of corrosion covered in the book has a definition, description, mechanism, examples and preventative methods. Case histories of failure are cited for each form. End of chapter questions are accompanied by an online solutions manual. * Comprehensively covers the principles of corrosion engineering, methods of corrosion protection and corrosion processes and control in selected engineering environments* Structured for corrosion science and engineering classes at senior undergraduate and graduate level, and is an ideal reference that readers will want to use in their professional work* Worked examples, extensive end of chapter exercises and accompanying online solutions and written by an expert from a key pretochemical university
Download or read book Corrosion Mechanisms in Theory and Practice written by Philippe Marcus and published by CRC Press. This book was released on 2002-07-24 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Called "a useful contribution to the current litereture on corrosion science, engineering, and technology" by Corrosion Review, this book offers real-world applications and problem-solving techniques to reduce the occurrence of pits, cracks, and deterioration in industrial, automotive, marine, and electronic structures. It details the electrochemic
Download or read book Passivity and Protection of Metals Against Corrosion written by N. D. Tomashov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considerable progress has been made in the past 20 years toward understanding the basic mechanisms of corrosion, and the application of this knowledge to its control. From the very beginning, educational institutions and industrial research laboratories have contributed greatly toward determining and elucidating the fundamental principles of corrosion reactions. Some of the basic principles involved in cor rosion of metals can be credited to early investigators. Michael Faraday in 1830-1840 studied the relationship between the quantity of a metal dissolved and the electric current which was produced by this reaction. He also proposed that the passivation of iron was through the formation of a film and that the dissolution of a metal was electro chemical in nature. Sir Humphrey Davy in 1824 worked out the funda mentals of galvanic corrosion of ships' hulls and applied sacrificial zinc anodes to protect them from sea water corrosion. Richard Arlie in 1847 demonstrated that corrosion produced by oxygen at the surface of iron in a flowing stream generated a current. With the fundamental knowledge available to him from these early investigators, Willis Rodney Whitney developed and expressed, in its most useful form, one of the basic scientific principles which provides modern corrosion specialists with a fundamental basis of corrosion control. Dr. Whitney concluded that corrosion of iron is electrochemical, and that the rate is simply a function of the electromotive force and resistance of the circuit.
Download or read book Corrosion Mechanisms in Theory and Practice written by Philippe Marcus and published by CRC Press. This book was released on 2011-08-18 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to include recent results from intensive worldwide research efforts in materials science, surface science, and corrosion science, Corrosion Mechanisms in Theory and Practice, Third Edition explores the latest advances in corrosion and protection mechanisms. It presents a detailed account of the chemical and electrochemical surface reactions
Download or read book Introduction to Corrosion Science written by E. McCafferty and published by Springer Science & Business Media. This book was released on 2010-01-04 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is intended for a one-semester course in corrosion science at the graduate or advanced undergraduate level. The approach is that of a physical chemist or materials scientist, and the text is geared toward students of chemistry, materials science, and engineering. This textbook should also be useful to practicing corrosion engineers or materials engineers who wish to enhance their understanding of the fundamental principles of corrosion science. It is assumed that the student or reader does not have a background in electrochemistry. However, the student or reader should have taken at least an undergraduate course in materials science or physical chemistry. More material is presented in the textbook than can be covered in a one-semester course, so the book is intended for both the classroom and as a source book for further use. This book grew out of classroom lectures which the author presented between 1982 and the present while a professorial lecturer at George Washington University, Washington, DC, where he organized and taught a graduate course on “Environmental Effects on Materials.” Additional material has been provided by over 30 years of experience in corrosion research, largely at the Naval Research Laboratory, Washington, DC and also at the Bethlehem Steel Company, Bethlehem, PA and as a Robert A. Welch Postdoctoral Fellow at the University of Texas. The text emphasizes basic principles of corrosion science which underpin extensions to practice.