Download or read book Theory of Bridge Aerodynamics written by Einar Strømmen and published by Springer Science & Business Media. This book was released on 2010-07-15 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this second edition a new chapter has been added covering the buffeting theory in a finite element format. The motivation for this has been that a finite element format is becoming more and more dominant in all areas of structural mechanics. It is streamlined for computer programming, and it facilitates the use of general purpose routines that are applicable in several types of structural engineering problems. In this book the finite element formulation of the problem of dynamic response calculations follows the general principle of virtual work, a general principle which may be found in many other text books. While the buffeting wind load itself has with no trouble been included in a finite element format, the main challenge has been to obtain a consistent formulation that includes all the relevant motion induced forces. This has been important, because, while many structures (e.g. long-span suspension bridges) may suffer greatly and become unstable at high wind velocities, the same structures may also benefit from these effects at the design wind velocity. It is well known that motion induced forces will change the stiffness and damping properties of the combined structure and flow system. If calculations are performed for a suitably close set of increasing mean wind velocities and the changing mechanical properties (stiffness and damping) are updated from one velocity to the next, then the response of the system may be followed up to wind velocities close to the stability limit, i.e. up to response values that are perceived as unduly large. Finite element calculations may be performed in time domain, in frequency domain or converted into a modal format. All these options have been included. Pursuing a time domain solution strategy requires the use of the so-called indicial functions. The theory behind such a formulation is also covered, and the determination of these functions from aerodynamic derivatives has been included in a separate appendix.
Download or read book Health Monitoring of Bridges written by Helmut Wenzel and published by John Wiley & Sons. This book was released on 2008-11-20 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Health Monitoring of Bridges prepares the bridge engineering community for the exciting new technological developments happening in the industry, offering the benefit of much research carried out in the aerospace and other industrial sectors and discussing the latest methodologies available for the management of bridge stock. Health Monitoring of Bridges: Includes chapters on the hardware used in health monitoring, methodologies, applications of these methodologies (materials, methods, systems and functions), decision support systems, damage detection systems and the rating of bridges and methods of risk assessment. Covers both passive and active monitoring approaches. Offers directly applicable methods and as well as prolific examples, applications and references. Is authored by a world leader in the development of health monitoring systems. Includes free software that can be downloaded from http://www.samco.org/ and provides the raw data of benchmark projects and the key results achieved. This book provides a comprehensive guide to all aspects of the structural health monitoring of bridges for engineers involved in all stages from concept design to maintenance. It will also appeal to researchers and academics within the civil engineering and structural health monitoring communities.
Download or read book Cable Supported Bridges written by Niels J. Gimsing and published by John Wiley & Sons. This book was released on 2011-12-30 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fourteen years on from its last edition, Cable Supported Bridges: Concept and Design, Third Edition, has been significantly updated with new material and brand new imagery throughout. Since the appearance of the second edition, the focus on the dynamic response of cable supported bridges has increased, and this development is recognised with two new chapters, covering bridge aerodynamics and other dynamic topics such as pedestrian-induced vibrations and bridge monitoring. This book concentrates on the synthesis of cable supported bridges, suspension as well as cable stayed, covering both design and construction aspects. The emphasis is on the conceptual design phase where the main features of the bridge will be determined. Based on comparative analyses with relatively simple mathematical expressions, the different structural forms are quantified and preliminary optimization demonstrated. This provides a first estimate on dimensions of the main load carrying elements to give in an initial input for mathematical computer models used in the detailed design phase. Key features: Describes evolution and trends within the design and construction of cable supported bridges Describes the response of structures to dynamic actions that have attracted growing attention in recent years Highlights features of the different structural components and their interaction in the entire structural system Presents simple mathematical expressions to give a first estimate on dimensions of the load carrying elements to be used in an initial computer input This comprehensive coverage of the design and construction of cable supported bridges provides an invaluable, tried and tested resource for academics and engineers.
Download or read book Aerodynamics of Large Bridges written by Allan Larsen and published by Routledge. This book was released on 2017-10-19 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: As bridges spans get longer, lighter and more slender, aerodynamic loads become a matter of serious study. This volume of proceedings reflect the co-operation between civil and mechanical engineering and meteorology in this field.
Download or read book Bridge Aeroelasticity written by J. A. Jurado and published by WIT Press. This book was released on 2011 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to the study of an aeroelastic phenomenon of cable supported long span bridges known as flutter, and proposes very innovative design methodologies, such as sensitivity analysis and optimization techniques, already utilized successfully in automobile and aerospace industries. The topic of long-span suspension and cable-stayed bridges is currently of great importance. These types of bridge pose great technical difficulties due to their slenderness and often great dimension. Therefore, these bridges tend to have problems caused by natural forces such as wind loads, some of which we have witnessed in our history, and we are currently seeing a very high incidence of bridge construction to overcome geographical obstacles such as bays, straits, or great estuaries. Therefore, it seems very appropriate to write a book showing the current capability of analysis and design, when up until now, the information could only be found partially in technical articles. This book will be useful for bridge design engineers as well as researchers working in the field. This book only requires previous knowledge of structural finite element models and dynamics, and it is advisable to have some previous knowledge in bridge engineering. Nevertheless, this book is very self-contained in such a way that all the information necessary to understand the theoretical developments is presented without the need of additional bibliography.
Download or read book Small Unmanned Aircraft written by Randal W. Beard and published by Princeton University Press. This book was released on 2012-02-26 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autonomous unmanned air vehicles (UAVs) are critical to current and future military, civil, and commercial operations. Despite their importance, no previous textbook has accessibly introduced UAVs to students in the engineering, computer, and science disciplines--until now. Small Unmanned Aircraft provides a concise but comprehensive description of the key concepts and technologies underlying the dynamics, control, and guidance of fixed-wing unmanned aircraft, and enables all students with an introductory-level background in controls or robotics to enter this exciting and important area. The authors explore the essential underlying physics and sensors of UAV problems, including low-level autopilot for stability and higher-level autopilot functions of path planning. The textbook leads the student from rigid-body dynamics through aerodynamics, stability augmentation, and state estimation using onboard sensors, to maneuvering through obstacles. To facilitate understanding, the authors have replaced traditional homework assignments with a simulation project using the MATLAB/Simulink environment. Students begin by modeling rigid-body dynamics, then add aerodynamics and sensor models. They develop low-level autopilot code, extended Kalman filters for state estimation, path-following routines, and high-level path-planning algorithms. The final chapter of the book focuses on UAV guidance using machine vision. Designed for advanced undergraduate or graduate students in engineering or the sciences, this book offers a bridge to the aerodynamics and control of UAV flight.
Download or read book Theory and Design of Bridges written by Petros P. Xanthakos and published by John Wiley & Sons. This book was released on 1994 with total page 1466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Indeed, this essential working reference for practicing civil engineers uniquely reflects today's gradual transition from allowable stress design to Load and Resistance Factor Design by presenting LRFD specifications - developed from research requested by AASH-TO and initiated by the NCHRP - which spell out new provisions in areas ranging from load models and load factors to bridge substructure elements and foundations.
Download or read book Theory and Applications of Aerodynamics for Ground Vehicles written by T Yomi Obidi and published by SAE International. This book was released on 2014-03-20 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to ground vehicle aerodynamics and methodically guides the reader through the various aspects of the subject. Those needing specific information or a refresher can easily jump to the material of interest. There is a particular emphasis on various vehicle types (passenger cars, trucks, trains, motorcycles, race cars, etc.). However, the book is focused on cars and trucks, which are the most common vehicles in the speed range in which the study of ground vehicle aerodynamics is beneficial. Readers will gain a fundamental understanding of the topic, which will help them design vehicles that have improved aerodynamics; this will lead to better fuel efficiency, improved performance, and increased passenger comfort. The author’s basic approach to the presentation of the material is complemented with review questions, application questions, exercises, and suggested projects at the end of most of the chapters, which helps the reader apply the information presented, either in the classroom or for self-study. Aside from offering a solid understanding of ground vehicle aerodynamics, the book also offers more thorough study of several key topics. One such topic is car-truck interaction, when one vehicle (usually the smaller one) is overtaking the other. There is a direct and instant benefit in terms of safety on the highway from understanding the forces at play when one vehicle passes the other in the same direction and sense. Chapters examine: • Drag • Noise and vehicle soiling • Wind tunnels and road/track testing • Numerical methods • Vehicle stability and control • Vehicle sectional design • Large vehicles: trucks, trailers, buses, trains • Severe service and off-road vehicles • Race cars and convertibles • Motorcycles • Concept vehicles
Download or read book Wind Effects on Structures written by Emil Simiu and published by John Wiley & Sons. This book was released on 2019-03-11 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides structural engineers with the knowledge and practical tools needed to perform structural designs for wind that incorporate major technological, conceptual, analytical and computational advances achieved in the last two decades. With clear explanations and documentation of the concepts, methods, algorithms, and software available for accounting for wind loads in structural design, it also describes the wind engineer's contributions in sufficient detail that they can be effectively scrutinized by the structural engineer in charge of the design. Wind Effects on Structures: Modern Structural Design for Wind, 4th Edition is organized in four sections. The first covers atmospheric flows, extreme wind speeds, and bluff body aerodynamics. The second examines the design of buildings, and includes chapters on aerodynamic loads; dynamic and effective wind-induced loads; wind effects with specified MRIs; low-rise buildings; tall buildings; and more. The third part is devoted to aeroelastic effects, and covers both fundamentals and applications. The last part considers other structures and special topics such as trussed frameworks; offshore structures; and tornado effects. Offering readers the knowledge and practical tools needed to develop structural designs for wind loadings, this book: Points out significant limitations in the design of buildings based on such techniques as the high-frequency force balance Discusses powerful algorithms, tools, and software needed for the effective design for wind, and provides numerous examples of application Discusses techniques applicable to structures other than buildings, including stacks and suspended-span bridges Features several appendices on Elements of Probability and Statistics; Peaks-over-Threshold Poisson-Process Procedure for Estimating Peaks; estimates of the WTC Towers’ Response to Wind and their shortcomings; and more Wind Effects on Structures: Modern Structural Design for Wind, 4th Edition is an excellent text for structural engineers, wind engineers, and structural engineering students and faculty.
Download or read book Bridge Aerodynamics written by Allan Larsen and published by Taylor & Francis. This book was released on 1998 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the May 1998 Symposium. Twenty-five contributions present state-of-the-art and future development trends in optimization, bridge aerodynamics and ship collision analysis, and operation and maintenance. Topics include probabilistic methods, aeroelastic analysis, cable dynamics, cross wind on vehicles, and numerical methods. Contains an author index but no subject index. Annotation copyrighted by Book News, Inc., Portland, OR
Download or read book In the Wake of Tacoma written by Richard Scott and published by Amer Society of Civil Engineers. This book was released on 2001 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the Wake of Tacoma is the first comprehensive treatment of the changes that the 1940 collapse of the first Tacoma Narrows Bridge has imposed on the design of suspension bridges. Written as a historical narrative, this heavily illustrated book describes design trends before the collapse, the collapse itself, and the investigations to determine its cause. The book then examines subsequent aerodynamic and other design developments and their application in suspension bridges worldwide in the decades following the collapse. In the Wake of Tacoma is a comprehensive reference work on suspension bridges in general, examining virtually every suspension bridge of note built in the past sixty years and highlighting overall development of the state of the art today. It goes beyond the major, well-known bridges to examine many small and mid-span suspension bridges worldwide that have contributed significantly to the modern development of the form. Also covered are the engineering debates and engineers involved; discussions of bridges under construction and under design; and new design concepts and materials to conquer the huge distances envisaged for such crossings as the Messina and Gibraltar straits. Presented in easy-to-understand, nontechnical language, this book, which received the 2006 Publication Award from the Japan Association for Wind Engineering, should appeal to both engineers and nonengineers with an interest in bridges and engineering in general. About the Author Richard Scott is a waterway heritage planner for Parks Canada, where he is currently responsible for palnning along the Trent-Severn waterway. He is also the editor of History of the Modern Suspension Bridge: Solving the Dilemma between Economy and Stiffness (ASCE Press, 2010). Product Reviews ...An outstanding history of suspension bridges focusing on post-Tacoma spans... In the Wake of Tacoma is extremely visual and written in a style that makes it accessible, exciting and interesting to both engineers and the general public. It is a masterful study- well researched, written, and illustrated. --Eric DeLony, Chief, Historic American Engineering Record, National Park Service
Download or read book Bridge Engineering Handbook Five Volume Set written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 3042 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection provides detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject, and also highlights bridges from around the world. This second edition of the bestselling Bridge Engineering Handbook covers virtually all the information an engineer would need to know about any type of bridge-from planning to construction to maintenance. It contains more than 2,500 tables, charts, and illustrations in a practical, ready-to-use format. An abundance of worked-out examples gives readers numerous practical step-by-step design procedures. Special attention is given to rehabilitation, retrofit, and maintenance. Coverage also includes seismic design and building materials. Thoroughly revised and updated, this second edition contains 26 new chapters.
Download or read book The Mathematical Theory of Vibration in Suspension Bridges written by Friedrich Bleich and published by . This book was released on 1950 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Separated and Vortical Flow in Aircraft Wing Aerodynamics written by Ernst Heinrich Hirschel and published by Springer Nature. This book was released on 2020-10-04 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid mechanical aspects of separated and vortical flow in aircraft wing aerodynamics are treated. The focus is on two wing classes: (1) large aspect-ratio wings and (2) small aspect-ratio delta-type wings. Aerodynamic design issues in general are not dealt with. Discrete numerical simulation methods play a progressively larger role in aircraft design and development. Accordingly, in the introduction to the book the different mathematical models are considered, which underlie the aerodynamic computation methods (panel methods, RANS and scale-resolving methods). Special methods are the Euler methods, which as rather inexpensive methods embrace compressibility effects and also permit to describe lifting-wing flow. The concept of the kinematically active and inactive vorticity content of shear layers gives insight into many flow phenomena, but also, with the second break of symmetry---the first one is due to the Kutta condition---an explanation of lifting-wing flow fields. The prerequisite is an extended definition of separation: “flow-off separation” at sharp trailing edges of class (1) wings and at sharp leading edges of class (2) wings. The vorticity-content concept, with a compatibility condition for flow-off separation at sharp edges, permits to understand the properties of the evolving trailing vortex layer and the resulting pair of trailing vortices of class (1) wings. The concept also shows that Euler methods at sharp delta or strake leading edges of class (2) wings can give reliable results. Three main topics are treated: 1) Basic Principles are considered first: boundary-layer flow, vortex theory, the vorticity content of shear layers, Euler solutions for lifting wings, the Kutta condition in reality and the topology of skin-friction and velocity fields. 2) Unit Problems treat isolated flow phenomena of the two wing classes. Capabilities of panel and Euler methods are investigated. One Unit Problem is the flow past the wing of the NASA Common Research Model. Other Unit Problems concern the lee-side vortex system appearing at the Vortex-Flow Experiment 1 and 2 sharp- and blunt-edged delta configurations, at a delta wing with partly round leading edges, and also at the Blunt Delta Wing at hypersonic speed. 3) Selected Flow Problems of the two wing classes. In short sections practical design problems are discussed. The treatment of flow past fuselages, although desirable, was not possible in the frame of this book.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1972 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wind Science and Engineering written by Giovanni Solari and published by Springer. This book was released on 2019-07-12 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an essential overview of wind science and engineering, taking readers on a journey through the origins, developments, fundamentals, recent advancements and latest trends in this broad field. Along the way, it addresses a diverse range of topics, including: atmospheric physics; meteorology; micrometeorology; climatology; the aerodynamics of buildings, aircraft, sailing boats, road vehicles and trains; wind energy; atmospheric pollution; soil erosion; snow drift, windbreaks and crops; bioclimatic city-planning and architecture; wind actions and effects on structures; and wind hazards, vulnerability and risk. In order to provide a comprehensive overview of wind and its manifold effects, the book combines scientific, descriptive and narrative chapters. The book is chiefly intended for students and lecturers, for those who want to learn about the genesis and evolution of this topic, and for the multitude of scholars whose work involves the wind.
Download or read book Wind Effects on Cable Supported Bridges written by You-Lin Xu and published by John Wiley & Sons. This book was released on 2013-03-07 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: As an in-depth guide to understanding wind effects on cable-supported bridges, this book uses analytical, numerical and experimental methods to give readers a fundamental and practical understanding of the subject matter. It is structured to systemically move from introductory areas through to advanced topics currently being developed from research work. The author concludes with the application of the theory covered to real-world examples, enabling readers to apply their knowledge. The author provides background material, covering areas such as wind climate, cable-supported bridges, wind-induced damage, and the history of bridge wind engineering. Wind characteristics in atmospheric boundary layer, mean wind load and aerostatic instability, wind-induced vibration and aerodynamic instability, and wind tunnel testing are then described as the fundamentals of the subject. State-of-the-art contributions include rain-wind-induced cable vibration, wind-vehicle-bridge interaction, wind-induced vibration control, wind and structural health monitoring, fatigue analysis, reliability analysis, typhoon wind simulation, non-stationary and nonlinear buffeting response. Lastly, the theory is applied to the actual long-span cable-supported bridges. Structured in an easy-to-follow way, covering the topic from the fundamentals right through to the state-of-the-art Describes advanced topics such as wind and structural health monitoring and non-stationary and nonlinear buffeting response Gives a comprehensive description of various methods including CFD simulations of bridge and vehicle loading Uses two projects with which the author has worked extensively, Stonecutters cable-stayed bridge and Tsing Ma suspension bridge, as worked examples, giving readers a practical understanding
