Download or read book The Transmission Line Modeling TLM Method in Electromagnetics written by Christos Christopoulos and published by Morgan & Claypool Publishers. This book was released on 2006-12-01 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the topic in electromagnetics known as Transmission-Line Modeling or Matrix method-TLM. While it is written for engineering students at graduate and advanced undergraduate levels, it is also highly suitable for specialists in computational electromagnetics working in industry, who wish to become familiar with the topic. The main method of implementation of TLM is via the time-domain differential equations, however, this can also be via the frequency-domain differential equations. The emphasis in this book is on the time-domain TLM. Physical concepts are emphasized here before embarking onto mathematical development in order to provide simple, straightforward suggestions for the development of models that can then be readily programmed for further computations. Sections with strong mathematical flavors have been included where there are clear methodological advantages forming the basis for developing practical modeling tools. The book can be read at different depths depending on the background of the reader, and can be consulted as and when the need arises.
Download or read book The Transmission line Modeling Method written by Christos Christopoulos and published by Oxford University Press, USA. This book was released on 1995 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by renowned researcher Christos Christopoulos, this book covers a broad area of electromagnetics, including microwaves, antennas, radar cross-section, electromagnetic compatibility, and electromagnetic heating. In addition, you will find a clear explanation of modeling principles from lumped components through one-, two, and three-dimensional complex systems.
Download or read book The Transmission Line Modeling t L M Method In Electromagnetics written by Christos Christopoulos and published by . This book was released on 2006 with total page 101 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction To Modern Planar Transmission Lines written by Anand K. Verma and published by John Wiley & Sons. This book was released on 2021-06-16 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive discussion of planar transmission lines and their applications, focusing on physical understanding, analytical approach, and circuit models Planar transmission lines form the core of the modern high-frequency communication, computer, and other related technology. This advanced text gives a complete overview of the technology and acts as a comprehensive tool for radio frequency (RF) engineers that reflects a linear discussion of the subject from fundamentals to more complex arguments. Introduction to Modern Planar Transmission Lines: Physical, Analytical, and Circuit Models Approach begins with a discussion of waves on transmission lines and waves in material medium, including a large number of illustrative examples from published results. After explaining the electrical properties of dielectric media, the book moves on to the details of various transmission lines including waveguide, microstrip line, co-planar waveguide, strip line, slot line, and coupled transmission lines. A number of special and advanced topics are discussed in later chapters, such as fabrication of planar transmission lines, static variational methods for planar transmission lines, multilayer planar transmission lines, spectral domain analysis, resonators, periodic lines and surfaces, and metamaterial realization and circuit models. Emphasizes modeling using physical concepts, circuit-models, closed-form expressions, and full derivation of a large number of expressions Explains advanced mathematical treatment, such as the variation method, conformal mapping method, and SDA Connects each section of the text with forward and backward cross-referencing to aid in personalized self-study Introduction to Modern Planar Transmission Lines is an ideal book for senior undergraduate and graduate students of the subject. It will also appeal to new researchers with the inter-disciplinary background, as well as to engineers and professionals in industries utilizing RF/microwave technologies.
Download or read book The Transmission Line Modeling TLM Method in Electromagnetics written by Christos Christopoulos and published by Springer Nature. This book was released on 2022-06-01 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the topic in electromagnetics known as Transmission-Line Modeling or Matrix method-TLM. While it is written for engineering students at graduate and advanced undergraduate levels, it is also highly suitable for specialists in computational electromagnetics working in industry, who wish to become familiar with the topic. The main method of implementation of TLM is via the time-domain differential equations, however, this can also be via the frequency-domain differential equations. The emphasis in this book is on the time-domain TLM. Physical concepts are emphasized here before embarking onto mathematical development in order to provide simple, straightforward suggestions for the development of models that can then be readily programmed for further computations. Sections with strong mathematical flavors have been included where there are clear methodological advantages forming the basis for developing practical modeling tools. The book can be read at different depths depending on the background of the reader, and can be consulted as and when the need arises.
Download or read book Transmission Line Matrix TLM in Computational Mechanics written by Donard de Cogan and published by CRC Press. This book was released on 2005-11-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The finite element method reigns as the dominant technique for modeling mechanical systems. Originally developed to model electromagnetic systems, the Transmission Line Matrix (TLM) method proves to match, and in some cases exceed, the effectiveness of finite elements for modeling several types of physical systems. Transmission Line Matrix in Computational Mechanics provides a tutorial approach to applying TLM for modeling mechanical and other physical systems. Transmission Line Matrix in Computational Mechanics begins with the history of TLM, an introduction to the theory using mechanical engineering concepts, and the electromagnetic basics of TLM. The authors then demonstrate the theory for use in acoustic propagation, along with examples of MATLAB® code. The remainder of the book explores the application of TLM to problems in mechanics, specifically heat and mass transfer, elastic solids, simple deformation models, hydraulic systems, and computational fluid dynamics. A discussion of state-of-the-art techniques concludes the book, offering a look at the current research undertaken by the authors and other leading experts to overcome the limitations of TLM in applying the method to diverse types of systems. This valuable reference introduces students, engineers, and researchers to a powerful, accurate, and stable alternative to finite elements, providing case studies and examples to reinforce the concepts and illustrate the applications.
Download or read book Transmission Line Matrix TLM in Computational Mechanics written by Donard de Cogan and published by CRC Press. This book was released on 2005-11-01 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The finite element method reigns as the dominant technique for modeling mechanical systems. Originally developed to model electromagnetic systems, the Transmission Line Matrix (TLM) method proves to match, and in some cases exceed, the effectiveness of finite elements for modeling several types of physical systems. Transmission Line Matrix in Compu
Download or read book Transmission Lines and Lumped Circuits written by Giovanni Miano and published by Elsevier. This book was released on 2001-02-23 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of transmission lines is a classical topic of electrical engineering. Recently this topic has received renewed attention and has been a focus of considerable research. This is because the transmisson line theory has found new and important applications in the area of high-speed VLSI interconnects, while it has retained its significance in the area of power transmission. In many applications, transmission lines are connected to nonlinear circuits. For instance, interconnects of high-speed VLSI chips can be modelled as transmission lines loaded with nonlinear elements. These nonlinearities may lead to many new effects such as instability, chaos, generation of higher order harmonics, etc. The mathematical models of transmission lines with nonlinear loads consist of the linear partial differential equations describing the current and voltage dynamics along the lines together with the nonlinear boundary conditions imposed by the nonlinear loads connected to the lines. These nonlinear boundary conditions make the mathematical treatment very difficult. For this reason, the analysis of transmission lines with nonlinear loads has not been addressed adequately in the existing literature. The unique and distinct feature of the proposed book is that it will present systematic, comprehensive, and in-depth analysis of transmission lines with nonlinear loads. A unified approach for the analysis of networks composed of distributed and lumped circuits A simple, concise and completely general way to present the wave propagation on transmission lines, including a thorough study of the line equations in characteristic form Frequency and time domain multiport representations of any linear transmission line A detailed analysis of the influence on the line characterization of the frequency and space dependence of the line parameters A rigorous study of the properties of the analytical and numerical solutions of the network equations The associated discrete circuits and the associated resisitive circuits of transmission lines Periodic solutions, bifurcations and chaos in transmission lines connected to noninear lumped circuits
Download or read book Analysis of Microstrip Transmission Lines Containing Discontinuities Using the Transmission Line Modeling TLM Method written by Patrick Richard Conway and published by . This book was released on 1991 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electromagnetic Metamaterials written by Christophe Caloz and published by John Wiley & Sons. This book was released on 2005-11-22 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electromagnetic metamaterials-from fundamental physics to advanced engineering applications This book presents an original generalized transmission line approach associated with non-resonant structures that exhibit larger bandwidths, lower loss, and higher design flexibility. It is based on the novel concept of composite right/left-handed (CRLH) transmission line metamaterials (MMs), which has led to the development of novel guided-wave, radiated-wave, and refracted-wave devices and structures. The authors introduced this powerful new concept and are therefore able to offer readers deep insight into the fundamental physics needed to fully grasp the technology. Moreover, they provide a host of practical engineering applications. The book begins with an introductory chapter that places resonant type and transmission line metamaterials in historical perspective. The next six chapters give readers a solid foundation in the fundamentals and practical applications: Fundamentals of LH MMs describes the fundamental physics and exotic properties of left-handed metamaterials TL Theory of MMs establishes the foundations of CRLH structures in three progressive steps: ideal transmission line, LC network, and real distributed structure Two-Dimensional MMs develops both a transmission matrix method and a transmission line method to address the problem of finite-size 2D metamaterials excited by arbitrary sources Guided-Wave Applications and Radiated-Wave Applications present a number of groundbreaking applications developed by the authors The Future of MMs sets forth an expert view on future challenges and prospects This engineering approach to metamaterials paves the way for a new generation of microwave and photonic devices and structures. It is recommended for electrical engineers, as well as physicists and optical engineers, with an interest in practical negative refractive index structures and materials.
Download or read book Radiating Nonuniform Transmission Line Systems and the Partial Element Equivalent Circuit Method written by Prof. Dr. Juergen Nitsch and published by John Wiley & Sons. This book was released on 2009-10-29 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: High frequencies of densely packed modern electronic equipment turn even the smallest piece of wire into a transmission line with signal retardation, dispersion, attenuation, and distortion. In electromagnetic environments with high-power microwave or ultra-wideband sources, transmission lines pick up noise currents generated by external electromagnetic fields. These are superimposed on essential signals, the lines acting not only as receiving antennas but radiating parts of the signal energy into the environment. This book is outstanding in its originality. While many textbooks rephrase that which has been written before, this book features: an accessible introduction to the fundamentals of electromagnetics; an explanation of the newest developments in transmission line theory, featuring the transmission line super theory developed by the authors; a unique exposition of the increasingly popular PEEC (partial element equivalent circuit) method, including recent research results. Both the Transmission Line Theory and the PEEC method are well suited to combine linear structures with circuit networks. For engineers, researchers, and graduate students, this text broadens insight into the basics of electrical engineering. It provides a deeper understanding of Maxwellian-circuit-like representations of multi-conductor transmission lines, justifies future research in this field.
Download or read book Computational Methods in Electromagnetic Compatibility written by Dragan Poljak and published by John Wiley & Sons. This book was released on 2018-04-24 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers a comprehensive overview of the recent advances in the area of computational electromagnetics Computational Method in Electromagnetic Compatibility offers a review of the most recent advances in computational electromagnetics. The authors—noted experts in the field—examine similar problems by taking different approaches related to antenna theory models and transmission line methods. They discuss various solution methods related to boundary integral equation techniques and finite difference techniques. The topics covered are related to realistic antenna systems including antennas for air traffic control or ground penetrating radar antennas; grounding systems (such as grounding systems for wind turbines); biomedical applications of electromagnetic fields (such as transcranial magnetic stimulation); and much more. The text features a number of illustrative computational examples and a reference list at the end of each chapter. The book is grounded in a rigorous theoretical approach and offers mathematical details of the formulations and solution methods. This important text: Provides a trade-off between a highly efficient transmission line approach and antenna theory models providing analysis of high frequency and transient phenomena Contains the newest information on EMC analysis and design principles Discusses electromagnetic field coupling to thin wire configurations and modeling in bioelectromagnetics Written for engineering students, senior researchers and practicing electrical engineers, Computational Method in Electromagnetic Compatibility provides a valuable resource in the design of equipment working in a common electromagnetic environment.
Download or read book Electromagnetic Analysis Using Transmission Line Variables written by Maurice Weiner and published by World Scientific. This book was released on 2001 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: V. Boundary conditions and dispersion. 5.1. Dielectric-dielectric interface. Node coupling: nearest node and multi-coupled node approximations. 5.2. Nearest nodes for ID interface. 5.3. Nearest nodes at 2D interface. 5.4. Truncated cell and oblique interface. 5.5. Single index cell notation. 5.6. Simplified iteration neglecting the nearest node approximation. 5.7. Non-uniform dielectric. Use of cluster cells. Other boundary conditions. 5.8. Dielectric- open circuit interface. 5.9. Dielectric - conductor interface. 5.10. Input/output conditions. 5.11. Composite transmission line. 5.12. Determination of initial static field by TLM method. 5.13. Time varying source voltage and antenna simulation. Dispersion. 5.14. Dispersion sources. 5.15. Dispersion example. 5.16. Propagation velocity in terms of wave number. 5.17. Dispersive properties of node resistance. 5.18. Node resistance in terms of wave number. 5.19. Anomalous dispersion. Incorporation of dispersion into TLM formulation. 5.20. Dispersion approximations. 5.21. Outline of dispersion calculation using the TLM method. 5.22. One dimensional dispersion iteration. 5.23. Initial conditions with dispersion present. 5.24. Stability of initial profiles with dispersion present. 5.25. Replacement of non-uniform field in cell with effective uniform field -- VI. Cell discharge properties and integration of transport phenomena into the TLM matrix. 6.1. Charge transfer between cells. 6.2. Relationship between field and cell charge. 6.3. Dependence of conductivity on carrier properties. Integration of carrier transport using TLM notation. Changes in cell occupancy and its effect on TLM iteration. 6.4. General continuity equations. 6.5. Carrier generation due to light activation. 6.6. Carrier generation due to avalanching: identical hole and electron drift velocities. 6.7. Avalanching with differing hole and electron drift velocities. 6.8. Two step generation process. 6.9. Recombination. 6.10. Limitations of simple exponential recovery model. 6.11. Carrier drift. 6.12. Cell charge iteraction.equivalence of drift and inter-cell currents. 6.13. Carrier diffusion. 6.14. Frequency of transport iteration. 6.15. Total contribution to changes in carrier cell occupancy -- VII. Description of TLM iteration. 7.1. Specification of geometry. 7.2. Description of inputs and TLM iteration outline. 7.3. Output format. Output simulation data. 7.4. Conditions during simulation. 7.5. Behavior during charge-up.establishment of static field profile. 7.6. Node resistance R(n,m) during activation. 7.7. Output pulse when semiconductor is activated. 7.8. Node recovery and its effect on output pulse. 7.9. Steady state and transient field profiles. 7.10. Partial activation of nodes and effect on profiles and output. 7.11. Cell charge following recovery. 7.12. Role ofTLM waves at charged boundary. 7.13. Comparison of possible boundary conditions at the semiconductor/dielectric interface. 7.14. Simulation results for boundary with non-integral nearest nodes. 7.15. Comparison of output with and without matched input /output lines. 7.16. Simulation of plane wave effects. Effect of alternating input -- VIII. Spice solutions. 8.1. Photoconductive switch. 8.2. Traveling wave Marx generator. 8.3. Traveling Marx wave in a layered dielectric. 8.4. Simulation of a traveling Marx wave in a layered dielectric. Pulse transformation and generation using non-uniform transmission lines. 8.5. Use of cell chain to simulate pulse transformer. 8.6. Pulse transformer simulation results. 8.7. Pulse sources using non-uniform TLM lines (switch at output). 8.8. Radial pulse source (switch at output). 8.9. Pulse sources with gain (PFXL sources). Darlington pulser. 8.10. TLM formulation of Darlington pulser. 8.11. SPICE simulation of Lossy Darlington Pulser.
Download or read book Digital Transmission Lines written by Kenneth D. Granzow and published by OUP USA. This book was released on 1998-06-04 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Transmission Lines provides new analysis, simulation and design tools for engineers who design digital circuits. Featuring a collection of algorithms that the author has used successfully for over 20 years, it explains methods used to simulate multi-wire transmission line signal propagation. The text covers transmission line fundamentals, circuit solutions at line terminations, propagation in layered media, transmission line parameter determination, and simulation of skin effect. An accompanying CD-ROM contains all source codes from the text as well as executable demo versions of commercial CAD codes that illustrate use of the principles in the book. Suitable for a graduate textbook, this volume should be on every digital circuit designer's bookshelf.
Download or read book Applied Computational Electromagnetics written by Nikolaos K. Uzunoglu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: @EOI: AEI rEOMETPEI Epigram of the Academy of Plato in Athens Electromagnetism, the science of forces arising from Amber (HAEKTPON) and the stone of Magnesia (MArNHLIA), has been the fOWldation of major scientific breakthroughs, such as Quantum Mechanics and Theory of Relativity, as well as most leading edge technologies of the twentieth century. The accuracy of electromagnetic fields computations for engineering purposes has been significantly improved during the last decades, due to the deVelopment of efficient computational techniques and the availability of high performance computing. The present book is based on the contributions and discussions developed during the NATO Advanced Study Institute on Applied Computational Electromagnetics: State of the Art and Future Trends, which has taken place in Hellas, on the island of Samos, very close to the birthplace of Electromagnetism. The book covers the fundamental concepts, recent developments and advanced applications of Integral Equation and Metliod of Moments Techniques, Finite Element and BOWldary Element Methods, Finite Difference Time Domain and Transmission Line Methods. Furthermore, topics related to Computational Electromagnetics, such as Inverse Scattering, Semi-Analytical Methods and Parallel Processing Techniques are included. The collective presentation of the principal computational electromagnetics techniques, developed to handle diverse challenging leading edge technology problems, is expected to be useful to researchers and postgraduate students working in various topics of electromagnetic technologies.
Download or read book Analysis of Linear Circuits written by Clayton R. Paul and published by . This book was released on 1989 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electromagnetic and Circuit Modelling of Multiconductor Transmission Lines written by Niels Faché and published by . This book was released on 1993 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiconductor transmission lines form the basic building blocks of microwave and millimeter-wave integrated circuits, and are omnipresent in digital systems. This book gives a detailed account of the way in which self-consistent computer-aided-design circuit models for such coupled lines, carrying either TEM or hybrid modes, can be obtained from a full-wave solution of Maxwell's equations. Latest advances for lossy lines are covered. The book also details the full-wave integral equation solution for basic transmission structures on MMICs, PCBs, and multiwire and microwire boards with the method of moments. For thin coupled microstrips and striplines the proposed space domain solution offers an alternative to the classical spectral domain approach. This book is the first to handle the full-wave analysis of discrete wire structures and of lossy polygonal conductors. The book is sure to appeal to a wide range of electrical and electronics engineers.