Download or read book The Steel Industry in the New Millennium Vol 1 written by R. Ranieri and published by CRC Press. This book was released on 2024-11-01 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first of two volumes containing the proceedings of the 1996 international conference: 'The steel industry in the new millennium: innovation, strategy and markets'. This volume is divided into four main sections, the first two correspond to the Conference's Working Group II on 'Technological Innovation', while the third contains the papers delivered during Working Group III, on the 'The Market for Steel'. The last section contains the final speech by Father William Hogan, written very much from the perspective of demand, whereas the introductory paper by Marcus looks at the steel market, mainly from the technological angle. This volume brings together papers by leading academics, steel executives and consultants, and business leaders from all the main steel producing countries. It reviews the prospects of demand and the new technologies that are re-shaping production patterns across the world.
Download or read book The Steel Industry in the New Millennium Technology and the market written by Ruggero Ranieri and published by CRC Press. This book was released on 1998 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first of two volumes containing the proceedings of the 1996 international conference: 'The steel industry in the new millennium: innovation, strategy and markets'. This volume is divided into four main sections, the first two correspond to the Conference's Working Group II on 'Technological Innovation', while the third contains the papers delivered during Working Group III, on the 'The Market for Steel'. The last section contains the final speech by Father William Hogan, written very much from the perspective of demand, whereas the introductory paper by Marcus looks at the steel market, mainly from the technological angle. This volume brings together papers by leading academics, steel executives and consultants, and business leaders from all the main steel producing countries. It reviews the prospects of demand and the new technologies that are re-shaping production patterns across the world.
Download or read book Big Steel written by Daniel Madar and published by UBC Press. This book was released on 2010-01-01 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: World steel production has grown dramatically as countries industrialize and add their own steel-producing capacity. China's prodigious expansion of steel output has increased the industry's natural vulnerability to oversupply and volatile prices. And the merger of the two largest steelmakers, Arcelor and Mittal, portends consolidation as a prime strategy for diversification and stabilization. This book examines the competition and survival strategies of the integrated steel industry from various vantage points including cost structures and technology, export pricing strategies, the economics of trade protection, Paul Krugman's Nobel Prize-winning explanation of industrial diffusion and trade, and the prospects of cooperating closely with automakers. The industry's future, Big Steel shows, is cosmopolitan.
Download or read book The Invention of Enterprise written by David S. Landes and published by Princeton University Press. This book was released on 2012-02-26 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work provides a sweeping history of enterprise in Mesopotamia and Neo-Babylon; carries the reader through the Islamic Middle East; offers insights into the entrepreneurial history of China, Japan, and colonial India; and describes the crucial role of the entrepreneur in innovation activity in the Western world.
Download or read book Sustainable Materials without the hot air written by Julian Allwood and published by Bloomsbury Publishing. This book was released on 2015-09-03 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its second edition, Sustainable Materials shows how we can greatly reduce the amount of material demanded and used in manufacturing, while still meeting everyone's needs. Materials, transformed from natural resources into the buildings, equipment, vehicles and goods that underpin our remarkable lifestyle, are made with amazing efficiency. But our growing demand is not sustainable. Production of just five materials – steel, aluminium, paper, plastics and cement – accounts for 55% of industrial emissions, and demand for materials will double by 2050. Can we continue to live well but use less materials? So far people have considered the problem with only one eye open, hoping for a magic solution (such as carbon capture and storage). But with both eyes open we have a whole new set of options. Rather than making more materials, we can use them more wisely – with less material, keeping them for longer, re-using their parts and more. These options make a huge difference: we really could set up our children with a more sustainable life, without compromising our own. Sustainable Materials faces up to the impacts of making materials in the 21st century. Drawing on their experiences working with innovative materials as well as the facts and findings of their research, Julian Allwood and Jonathan Cullen provide an evidence-based vision of change that will allow us to make our future more sustainable. Packed with hundreds of colour photos and helpful graphs and diagrams, Sustainable Materials provides a thorough analysis of the problems that we face through wasteful attitudes and the growing demand for materials, as well as an evaluation of practical and achievable solutions for the future. The first edition of this optimistic and richly-informed book was listed as one of Bill Gate's top reads in 2015, and was also chosen as an Outstanding Academic Title by ACRL Choice magazine. This up-to-date, revised edition is perfect for anyone with an interest in sustainability.
Download or read book Reappraising State Owned Enterprise written by Franco Amatori and published by Routledge. This book was released on 2013-06-17 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a quarter century of almost general condemnation and rebuttal of the entire nationalization experience, it appears that there are second thoughts about governmental direct intervention in the economy. Reappraising State-Owned Enterprise deals with a topic often undervalued in the past decade but which now, with the crisis of 2008-2009, calls for greater attention: the direct intervention of the State as Entrepreneur. The collection of essays in this volume – prepared by some of the leading authorities in the field – offers a contribution to this debate by providing a balanced assessment of two of the most relevant experiences of mixed economies, the United Kingdom and Italy. In this respect, a comparison between these two countries is very much appropriate since in both nations the State played an important role as "Entrepreneur" starting in the early 20th century. In Great Britain and Italy, the heyday of the "State as Entrepreneur" was in the years right after WWII when it was used as a tool for promoting a modern society in which citizens acquired a stronger sense of belonging to their nations. The UK and Italy saw the State take on a too-pervasive role in the 70s; the two nations responded in different ways. In the 1980s Great Britain embarked on a harsh process of privatizations while Italians struggled on until finally submitting to privatizations in their nation in the following decade. The deep crisis of the final years of the 21st century forced both nations to reconsider State interventions as an appropriate tool in order to protect the wellbeing of the national economy.
Download or read book Reader s Guide to British History written by David Loades and published by Routledge. This book was released on 2020-12-17 with total page 4319 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Reader's Guide to British History is the essential source to secondary material on British history. This resource contains over 1,000 A-Z entries on the history of Britain, from ancient and Roman Britain to the present day. Each entry lists 6-12 of the best-known books on the subject, then discusses those works in an essay of 800 to 1,000 words prepared by an expert in the field. The essays provide advice on the range and depth of coverage as well as the emphasis and point of view espoused in each publication.
Download or read book Pollution Control Technologies Volume III written by Bhaskar Nath and published by EOLSS Publications. This book was released on 2009-09-30 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pollution Control Technologies is a component of Encyclopedia of Environmental and Ecological Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The Theme on Pollution Control Technologies focuses largely concerned with strategies for pollution reduction, and pollution prevention if at all possible, using scientific and technological methods. Focusing primarily but not exclusively on air pollution, the Theme is written in simple English, avoiding both mathematical and chemical equations as far as possible to facilitate effective and widest possible dissemination. The content of the Theme provides the essential aspects and a myriad of issues of great relevance to our world such as: Control of Particulate Matter in Gaseous Emissions; Control of Gaseous Emissions; Pollution Control through Efficient Combustion Technology; Pollution Control in Industrial Processes; Pollution Control in Transportation, which are then expanded into multiple subtopics, each as a chapter. These three volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs
Download or read book Heat Treating Including Steel Heat Treating In the New Millennium written by Sandra J. Midea and published by ASM International. This book was released on 2000-01-01 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers from a November 1999 meeting examine heat treating and associated industries, touching on aspects of control of microstructure through heat treatment, equipment and processes, forge heating with induction, quenching and distortion, and steel heat treating in the new millennium. Subjects inclu
Download or read book The European Yearbook of Business History written by Wilfried Feldenkirchen and published by Routledge. This book was released on 2019-04-26 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1999, this volume aims to reflect on the changing structure, experience and aspirations of European business as it approaches the Millennium, including chapters in issues including business scandals in the Weimar Republic, the evolution of management consultancies in Portugal and Spain and the British Public Sector. The yearbook exploits these changes by serving as a forum for debate in Europe and aims to bring work on individual countries to a wider, European audience. Responding to the challenge of globalization, cooperation within a single European market and an increasing interest in corporate governance and environmental issues, the yearbook broadens to include socio-political issues along with stimulating new types of scholarship among European business historians and new preservation strategies by business archivists.
Download or read book ENERGY AND ENVIRONMENTAL MANAGEMENT IN METALLURGICAL INDUSTRIES written by R. C. GUPTA and published by PHI Learning Pvt. Ltd.. This book was released on 2012-12-06 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book deals with the environmental aspects of metallurgical industries, including ferrous (iron and steel, DRI units, EAF units, ferroalloys and foundries) and non-ferrous (aluminium, copper, lead and zinc) plants. The text, comprising of eight chapters, discusses fundamental aspects of environment management, various energy sources available on the earth and environment awareness required for sustained economic growth. The book provides a thorough understanding of pollution sources in metallurgical industries and their abatement techniques. It also provides details of energy management in metal industry and enumerates factors for metallurgical plant location and layout. Furthermore, it presents health and safety guidelines for metallurgical professionals. The text concludes with discussion on basic legislations related to environment and labour. This book is primarily designed for undergraduate students of metallurgical engineering. Besides, it will also be useful as a ready reference source to professionals associated with metallurgical industries. KEY FEATURES Coverage of various types of environmental issues such as air emission, toxic effluents, solid waste, thermal discharge, noise and radiation. Analysis of renewable and non-renewable energy sources on the earth with current energy usage pattern and future consumption pattern. Description of various activities in the metallurgical units along with discussion of sources of pollution and abatement techniques. Guidelines for the plant location and layout. Basic information about labour health and safety, environmental legislations, labour laws, ISO 14000, carbon credit, etc.
Download or read book Transactions of the Manchester Statistical Society written by Manchester Statistical Society (Manchester, England) and published by . This book was released on 1997 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Report of the society and list of members included in each vol.
Download or read book Australian Master Human Resources Guide 2010 written by and published by CCH Australia Limited. This book was released on 2010 with total page 1481 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Contemporary Tourism Reviews Volume 1 written by Chris Cooper and published by Goodfellow Publishers Ltd. This book was released on 2014-11-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: * State of the art reviews of sub fields of tourism - must-have information by experts in their field; * Every review is a multi-dimensional ’one-stop shop’ of information, equipping the reader with all they need to learn about each topic, saving valuable research time;
Download or read book Metals Abstracts written by and published by . This book was released on 1999-04 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Urban Development Debates in the New Millennium written by Kulwant Rai Gupta and published by Atlantic Publishers & Dist. This book was released on 2004 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Collection Of Essays By Academics And Practitioners From Around The World Underscores Issues And Concerns Of Sustainable Urban Development And Best Practices In Terms Of Theory As Well As Praxes. Contributors Have Made An Attempt To Critically Reconcile The Hypothetical With The Applied In Order To Arrive At Innovative Solutions For Urban Good Governance In The Context Of The Steady Proliferation Of Habitats And Conurbations All Over The World. Their Papers More Often Than Not Transcend Regional Specifics To Address The Common Agenda Of Urban Development Debates As Informed By Assorted Modernization Perspectives In The 21St Century. This Volume Brings Together Social Scientists, Development Consultants And Nonprofit Professionals So That Multipositional Theories And Multicultural Praxes Might Be Reflected In Their Papers Based On Empirical Research And Field-Level Insights. It Is Expected That This Volume Will Provoke Fresh Debates And New Ideas That Will Facilitate Theory-Building As Well As Formulation Of Paradigms For Good Practices And Sustainable Urban Applications.The Book Would Be Found Highly Useful By Town Planners, Municipal Administrators, Ngos Working In The Field Of Urban Development And Common Readers Interested In Urban Problems And Policies. It Will Be Equally Valuable For Policy Makers As Well As Students, Researchers And Teachers Of Urban Economics, Urban Sociology, Urban Geography And Public Administration.
Download or read book Theory and Methods of Metallurgical Process Integration written by Ruiyu Yin and published by Elsevier. This book was released on 2016-05-26 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory and Methods of Metallurgical Process Integration analyzes the basic elements and characteristics of steel manufacturing processes and operation, also proposing a theory of precise dynamic design and integration of steel plants. Following several case studies, a new generation steel manufacturing process is proposed. Through deep description and analysis of the dynamic operation of the steel manufacturing process, this book can help readers understand that the study of dynamic integration for the "mass-energy-time-space-information" during the steel manufacturing process has to be highly emphasized in order to further promote optimization of the steel manufacturing process and plant. - Extends the research methodology and future direction of the metallurgical process - Concentrates on the study of the physical essence and the running rules of the dynamic operation of the steel manufacturing process - Summarizes six rules for the dynamic operation of the steel manufacturing process for newly-built or existing steel plants, which provides useful guidance for engineering design, production technology, and production and technology management
