Download or read book Progress in Hybrid RANS LES Modelling written by Shia-Hui Peng and published by Springer Science & Business Media. This book was released on 2010-09-17 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid modelling of turbulent flows, combining RANS and LES techniques, has received increasing attention over the past decade to fill the gap between (U)RANS and LES computations in aerodynamic applications at industrially relevant Reynolds numbers. With the advantage of hybrid RANS-LES modelling approaches, being considerably more computationally efficient than full LES and more accurate than (U)RANS, particularly for unsteady aerodynamic flows, has motivated numerous research and development activities. These activities have been increasingly stimulated by the provision of modern computing facilities. The present book contains the contributions presented at the Third Symposium on Hybrid RANS-LES Methods, held in Gdansk, Poland, 10-12 June 2009. To a certain extent, this conference was a continuation of the first symposium taking place in Stockholm (Sweden, 2005) and the second in Corfu (Greece, 2007). Motivated by the extensive interest in the research community, the papers presented at the Corfu symposium were published by Springer in the book entitled “Advances in Hybrid RANS-LES Modelling” (in Notes on Numerical Fluid Mechanics and Multidisciplinary Design, Vol. 97). At the Gdansk symposium, along with four invited keynotes, given respectively by S. Fu, U. Michel, M. Sillen and P. Spalart, another 28 papers were presented on the following topics: Unsteady RANS, LES, Improved DES Methods, Hybrid RANS-LES Methods, DES versus URANS and other Hybrid Methods, Modelli- related Numerical Issues and Industrial Applications. After the symposium all full papers have been further reviewed and revised for publication in the present book.
Download or read book Low Reynolds Number written by Mustafa Serdar Genç and published by BoD – Books on Demand. This book was released on 2012-04-04 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports the latest development and trends in the low Re number aerodynamics, transition from laminar to turbulence, unsteady low Reynolds number flows, experimental studies, numerical transition modelling, control of low Re number flows, and MAV wing aerodynamics. The contributors to each chapter are fluid mechanics and aerodynamics scientists and engineers with strong expertise in their respective fields. As a whole, the studies presented here reveal important new directions toward the realization of applications of MAV and wind turbine blades.
Download or read book New Results in Numerical and Experimental Fluid Mechanics X written by Andreas Dillmann and published by Springer. This book was released on 2016-03-28 with total page 855 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents contributions to the 19th biannual symposium of the German Aerospace Aerodynamics Association (STAB) and the German Society for Aeronautics and Astronautics (DGLR). The individual chapters reflect ongoing research conducted by the STAB members in the field of numerical and experimental fluid mechanics and aerodynamics, mainly for (but not limited to) aerospace applications, and cover both nationally and EC-funded projects. Special emphasis is given to collaborative research projects conducted by German scientists and engineers from universities, research-establishments and industries. By addressing a number of cutting-edge applications, together with the relevant physical and mathematics fundamentals, the book provides readers with a comprehensive overview of the current research work in the field. Though the book’s primary emphasis is on the aerospace context, it also addresses further important applications, e.g. in ground transportation and energy.
Download or read book Engineering Turbulence Modelling and Experiments 5 written by W. Rodi and published by Elsevier. This book was released on 2002-08-21 with total page 1029 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulence is one of the key issues in tackling engineering flow problems. As powerful computers and accurate numerical methods are now available for solving the flow equations, and since engineering applications nearly always involve turbulence effects, the reliability of CFD analysis depends increasingly on the performance of the turbulence models. This series of symposia provides a forum for presenting and discussing new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. The papers in this set of proceedings were presented at the 5th International Symposium on Engineering Turbulence Modelling and Measurements in September 2002. They look at a variety of areas, including: Turbulence modelling; Direct and large-eddy simulations; Applications of turbulence models; Experimental studies; Transition; Turbulence control; Aerodynamic flow; Aero-acoustics; Turbomachinery flows; Heat transfer; Combustion systems; Two-phase flows. These papers are preceded by a section containing 6 invited papers covering various aspects of turbulence modelling and simulation as well as their practical application, combustion modelling and particle-image velocimetry.
Download or read book Injection and Mixing in Turbulent Flow written by Joseph A. Schetz and published by . This book was released on 1980 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Download or read book Advances in Computation Modeling and Control of Transitional and Turbulent Flows written by Tapan Kumar Sengupta and published by World Scientific. This book was released on 2015-12-01 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The role of high performance computing in current research on transitional and turbulent flows is undoubtedly very important. This review volume provides a good platform for leading experts and researchers in various fields of fluid mechanics dealing with transitional and turbulent flows to synergistically exchange ideas and present the state of the art in the fields. Contributed by eminent researchers, the book chapters feature keynote lectures, panel discussions and the best invited contributed papers."--
Download or read book Fluid Mechanics Measurements written by R. Goldstein and published by Routledge. This book was released on 2017-11-13 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition provides updated fluid mechanics measurement techniques as well as a comprehensive review of flow properties required for research, development, and application. Fluid-mechanics measurements in wind tunnel studies, aeroacoustics, and turbulent mixing layers, the theory of fluid mechanics, the application of the laws of fluid mechanics to measurement techniques, techniques of thermal anemometry, laser velocimetry, volume flow measurement techniques, and fluid mechanics measurement in non-Newtonian fluids, and various other techniques are discussed.
Download or read book Fluid Structure Sound Interactions and Control written by Yu Zhou and published by Springer. This book was released on 2018-05-15 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the Symposium on Fluid-Structure-Sound Interactions and Control (FSSIC), (held in Tokyo on Aug. 21-24, 2017), which largely focused on advances in the theory, experiments on, and numerical simulation of turbulence in the contexts of flow-induced vibration, noise and their control. This includes several practical areas of application, such as the aerodynamics of road and space vehicles, marine and civil engineering, nuclear reactors and biomedical science, etc. Uniquely, these proceedings integrate acoustics with the study of flow-induced vibration, which is not a common practice but can be extremely beneficial to understanding, simulating and controlling vibration. The symposium provides a vital forum where academics, scientists and engineers working in all related branches can exchange and share their latest findings, ideas and innovations – bringing together researchers from both east and west to chart the frontiers of FSSIC.
Download or read book Integrated Optics Devices Materials and Technologies XX written by Jean Emmanuel Broquin and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Techniques of Flow Visualization written by Wolfgang Merzkirch and published by . This book was released on 1987 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: The techniques of flow visualization and their application in wind tunnels, water channels, and experiments related to propulsion research are reviewed. These techniques can be classified roughly into three major groups: Surface flow visualization, scattering from flow tracers, and density sensitive flow visualization. The progress in laser optics and the wide-spread use of computers has led to the development of new techniques and evaluation procedures, which are included in the review; e.g. laser-induced fluorescence, speckle photography, image processing, and optical tomography. Emphasis is given to the discussion of the physical background of the methods. Information on technical details is provided by means of a number of sample photographs and by respective references.
Download or read book Hyperbolic Partial Differential Equations written by Andreas Meister and published by Vieweg+Teubner Verlag. This book was released on 2011-12-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives an introduction to the fundamental properties of hyperbolic partial differential equations und their appearance in the mathematical modelling of various problems from practice. It shows in an unique manner concepts for the numerical treatment of such equations starting from basic algorithms up actual research topics in this area. The numerical methods discussed are central and upwind schemes for structured and unstructured grids based on ENO and WENO reconstructions, pressure correction schemes like SIMPLE and PISO as well as asymptotic-induced algorithms for low-Mach number flows.
Download or read book Vortex Dominated Flows written by Denis L. Blackmore and published by World Scientific. This book was released on 2005 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Honoring the contributions of one of the field's leading experts, Lu Ting, this indispensable volume contains important new results at the cutting edge of research. A wide variety of significant new analytical and numerical results in critical areas are presented, including point vortex dynamics, superconductor vortices, cavity flows, vortex breakdown, shock/vortex interaction, wake flows, magneto-hydrodynamics, rotary wake flows, and hypersonic vortex phenomena.The book will be invaluable for those interested in the state of the art of vortex dominated flows, both from a theoretical and applied perspective.Professor Lu Ting and Joe Keller have worked together for over 40 years. In their first joint work entitled ?Periodic vibrations of systems governed by nonlinear partial differential equations?, perturbation analysis and bifurcation theory were used to determine the frequencies and modes of vibration of various physical systems. The novelty was the application to partial differential equations of methods which, previously, had been used almost exclusively on ordinary differential equations. Professsor Lu Ting is an expert in both fluid dynamics and the use of matched asymptotic expansions. His physical insight into fluid flows has led the way to finding the appropriate mathematical simplications used in the solutions to many difficult flow problems.
Download or read book Instability and Control of Massively Separated Flows written by Vassilis Theofilis and published by Springer. This book was released on 2015-01-03 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the outcome of the international meeting on instability, control and noise generated by massive flow separation that was organized at the Monash Center, in Prato, Italy, September 4-6, 2013. The meeting served as the final review of the EU-FP7 Instability and Control of Massively Separated Flows Marie Curie travel grant and was supported by the European Office of Aerospace Research and Development. Fifty leading specialists from twelve countries reviewed the progress made since the 50s of the last century and discussed modern analysis techniques, advanced experimental flow diagnostics and recent developments in active flow control techniques from the incompressible to the hypersonic regime. Applications involving massive flow separation and associated instability and noise generation mechanisms of interest to the aeronautical, naval and automotive industries have been addressed from a theoretical, numerical or experimental point of view, making this book a unique source containing the state-of-the-art in separated flow instability and its control.
Download or read book 28th International Symposium on Shock Waves written by Konstantinos Kontis and published by Springer Science & Business Media. This book was released on 2012-03-22 with total page 1122 pages. Available in PDF, EPUB and Kindle. Book excerpt: The University of Manchester hosted the 28th International Symposium on Shock Waves between 17 and 22 July 2011. The International Symposium on Shock Waves first took place in 1957 in Boston and has since become an internationally acclaimed series of meetings for the wider Shock Wave Community. The ISSW28 focused on the following areas: Blast Waves, Chemically Reacting Flows, Dense Gases and Rarefied Flows, Detonation and Combustion, Diagnostics, Facilities, Flow Visualisation, Hypersonic Flow, Ignition, Impact and Compaction, Multiphase Flow, Nozzle Flow, Numerical Methods, Propulsion, Richtmyer-Meshkov, Shockwave Boundary Layer Interaction, Shock Propagation and Reflection, Shock Vortex Interaction, Shockwave Phenomena and Applications, as well as Medical and Biological Applications. The two Volumes contain the papers presented at the symposium and serve as a reference for the participants of the ISSW 28 and individuals interested in these fields.
Download or read book Abstracts of Papers written by F. E. Ian Hamilton and published by . This book was released on 1964 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Shape Optimization for Fluids written by Bijan Mohammadi and published by Oxford University Press. This book was released on 2010 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: PREFACE; ACKNOWLEDGEMENTS; 1. Introduction; 2. Optimal shape design; 3. Partial differential equations for fluids; 4. Some numerical methods for fluids; 5. Sensitivity evaluation and automatic differentiation; 6. Parameterization and implementation issues; 7. Local and global optimization; 8. Incomplete sensitivities; 9. Consistent approximations and approximate gradients; 10. Numerical results on shape optimization; 11. Control of unsteady flows; 12. From airplane design to microfluidic; 13. Toplogical optimization for fluids; 14. Conclusion and perspectives; INDEX.
Download or read book Engineering Turbulence Modelling and Experiments 6 written by Wolfgang Rodi and published by Elsevier. This book was released on 2005-05-05 with total page 1011 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the world renowned ERCOFTAC (International Symposium on Engineering Turbulence Modelling and Measurements).The proceedings include papers dealing with the following areas of turbulence:·Eddy-viscosity and second-order RANS models ·Direct and large-eddy simulations and deductions for conventional modelling ·Measurement and visualization techniques, experimental studies ·Turbulence control ·Transition and effects of curvature, rotation and buoyancy on turbulence ·Aero-acoustics ·Heat and mass transfer and chemically reacting flows ·Compressible flows, shock phenomena ·Two-phase flows ·Applications in aerospace engineering, turbomachinery and reciprocating engines, industrial aerodynamics and wind engineering, and selected chemical engineering problems Turbulence remains one of the key issues in tackling engineering flow problems. These problems are solved more and more by CFD analysis, the reliability of which depends strongly on the performance of the turbulence models employed. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulent momentum, heat and mass transfer. For the understanding of turbulence phenomena, experiments are indispensable, but they are equally important for providing data for the development and testing of turbulence models and hence for CFD software validation. As in other fields of Science, in the rapidly developing discipline of turbulence, swift progress can be achieved only by keeping up to date with recent advances all over the world and by exchanging ideas with colleagues active in related fields.
