Download or read book The Seven Deadly Wastes and How to Remove Them from Your Business written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2014-09-07 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the seven deadly wastes (muda) in the value stream process. It presents the cost of each waste, its effect on the process, and how it can be eliminated to increase profitability. Waste removal increases the profitability of any business. Processes are classified into value added and waste. The seven deadly wastes that could exist in any manufacturing process originated in Japan and are defined in the Toyota production system (TPS). The main goal became removing them. For each waste, there is a strategy to remove or eliminate it. What is less likely is that managers will know how any of these issues are affecting them and increasing costs. To remove each waste, you have to understand where it comes from, why it exists, and how it affects your business. In the economic recession, many companies are taking abstinence procedures to reduce costs. This might include layoff labors and reducing some wages. Actually, those actions might work for only a short period. Afterwards, the situation may return and in worse shape unless the company changes its way of doing things, including enacting a culture of continuous improvement. This puts us back to why the Toyota production system has been created.
Download or read book The Problem Solving Kata as a Tool for Culture Change Building True Lean Organizations written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2022-11-09 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some businesses have reduced staff and made resource cuts to survive the global economic downturn, while others have improved business practices and culture. Unfortunately, there is still a difference between successful and less successful businesses in terms of culture adaptability, people management, and process management. In organisations like Toyota, which, in contrast to its rivals, has a mindset of process improvement, culture drives competitive advantage. Other businesses might benefit from Toyota's teachings by changing their routines for behaving and thinking in order to increase staff performance.
Download or read book Creating a One Piece Flow and Production Cell Just in time Production with Toyota s Single Piece Flow written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2022-12-01 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-piece flow, also known as continuous flow, is considered the ultimate lean goal. It describes how items are efficiently moved from one stage of the process to the next by designing the workflow around the requirements of the product. To get from point A to point B is the objective. Any waste or halt in production is equivalent to the stones and dams that direct the flow of water. We examine our layouts, devices, procedures, rules, cultures, and knowledge while attempting to implement flow to see what might be causing these flow-blocking factors. Continuous flow aids in waste reduction. Because there is harmony and rhythm between each stage of the process, wastes are eliminated from the system. This enables each team member to provide value rather than produce waste. Processing waste is decreased because there is naturally less rework (or overprocessing), there is only as much work done as the customer is prepared to pay for, and there is only one accepted technique to complete the task (no bad processing).
Download or read book Toyota Production System Concepts written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: To save money during the economic downturn, many businesses are using abstinence policies. This might mean firing employees and reducing pay for some people. Actually, those actions might only work for a little while. If the company doesn't make a culture of always getting better and change how it works, the problem might happen again and get even worse. This takes us back to the reason why the Toyota production system was created. Waste means something that takes up resources, but doesn't give anything back to the customer. Many activities are not useful and can be divided into two categories. Even though type one muda doesn't bring any benefit, we can't avoid it because of the resources and technology we have now. An example of this would be inspecting welds to make sure they are safe. We also refer to this as a necessary task that does not add value. Using two unnecessary steps does not make things better and can be easily taken out. An illustration is a way to make a process in a village organized and efficient. It turns it into a cell where things that are not needed can be removed and there is no need for extra supplies. Only a tiny fraction of the activities carried out in a value-stream actually create value that the client truly finds valuable. The best way to improve how well a business does is to stop doing all the things that aren't needed.
Download or read book Manufacturing Wastes Stream Toyota Production System Lean Principles and Values written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2022-10-02 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to cut costs during the economic downturn, many businesses are implementing abstinence policies. This could mean laying off workers and cutting some wages. In fact, those actions might only work for a short time.Unless the company implements a culture of continuous improvement and alters its method of operation, the situation may recur and become even worse. This brings us back to the purpose for which the Toyota production system was developed. Waste is anything that uses resources but offers the customer nothing in return. Most activities are waste, or "muda," and can be divided into two categories. Although type one muda does not provide value, it is inescapable given the production assets and technologies available today. An illustration would be checking welds for safety, that type we also call necessary non value-added activity. Type two muda does not add value and can be quickly eliminated. An illustration is a process in a process village with disconnected phases that may be swiftly converted into a cell where unnecessary material moves and inventory are no longer necessary. A very small portion of all value-stream activities truly generate value as perceived by the client. The most effective way to boost business performance is to stop doing the numerous unnecessary things.
Download or read book Lean Healthcare Enhancing the Patient Care Process while Eliminating Waste and Lowering Costs written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2022-11-14 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt: By minimizing waste and waiting times, the lean operational concepts and techniques serve to maximize value for patients. It places a strong emphasis on staff involvement, ongoing improvement, and consideration of the demands of the consumer.. All employees of the firm, from clinicians to operations and administrative personnel, continuously work to identify areas of waste and eliminate anything that does not create value for patients using lean concepts in healthcare. To make sure that the production team members on the assembly line always have the parts and tools they need to complete their tasks, Toyota has put all the systems and support personnel in place. If you visit one of their assembly factories, you can see this for yourself. Although patients are more essential, it can be argued that Toyota invests significantly more in its front-line staff than many hospitals do. Toyota enables team members to concentrate on their tasks and the truck in front of them, resulting in greater outcomes and overall happiness.
Download or read book Heijunka The Leveling Art of the Japanese Auto Industry written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2022-11-22 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heijunka (Japanese for "production smoothing or leveling"): It is a technique used to smooth out production in all departments as well as that of the supplier over time in order to facilitate Just-In-Time (JIT) production. It means production leveling (finding and maintaining average production volumes). The fundamental goal of using the Heijunka technique is to supply goods at a steady rate so that upstream and downstream operations can likewise run at a steady and predictable rate, hence lowering the inventory. The heijunka technique works by leveling both the production volume and the product mix. It doesn’t build products according to the actual flow of customer orders, which can swing up and down widely, but takes the total volume of orders in a period and levels them out so the same amount and mix are being made each day. Heijunka is a technique that helps reach the defined takt time and adds value to it.
Download or read book Toyota Standard Work The Foundation of Kaizen written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2021-03-13 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having no standardization work process means no quality. Everyone will do this task differently. Tracking the source of errors is difficult without the work standard. When a leader perform gemba walk on shop floor to observe the situation, there is no benefit from the walk when there is no standard. In the classic old way of management, companies were and (many are still) following the Taylor’s principle, Taylor said that industrial engineers should be the only ones who initiate, create, modify, adapt and improve the process. And workers should follow what the industrial engineers are saying. Standard work is being used to measure employees performance. This is really a contrary to respect for people which is one of the main pillars in the Toyota production system and was the reason why Toyota is a high performance company. Toyota is strong by its people not by its process. Toyota Creates standard work to eliminate wastes, develop employees skills and develop high level of knowledge.
Download or read book 5S written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: 5S is not just about a clean and shiny workplace. Its a strategy for removing wastes and improving productivity. This is how Toyota utilize the tool to improve workplace productivity. This book provide a comprehensive guide about the tool. How to plan, execute and sustain. This book is a practical guide with many examples, photos and presentations.
Download or read book Toyota Prodcution System Concepts written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heijunka, which means "production smoothing or leveling" in Japanese, is a method that helps balance production in all areas and with suppliers over time. It aims to make Just-In-Time (JIT) production easier. Heijunka is an important part of Just-in-Time (JIT) production. It means finding and keeping a consistent level of production. The main purpose of using the Heijunka technique is to provide goods at a consistent pace, which allows other operationsto also run smoothly and predictably. This helps decrease wastes and the amount of inventory.
Download or read book The Ultimate Guide to Successful Lean Transformation written by Mohammed Hamed Ahmed Soliman and published by personal-lean.org. This book was released on 2020-11-30 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many businesses say that lean failed to meet their long-term objectives and that the improvements it brought about were only temporary. When businesses utilize lean as a toolkit, copying and pasting the methodologies without trying to adapt the employee culture, manage the improvement process, maintain the outcomes, and grow their leaders, 7 out of every 10 lean projects fail. The primary objective when the Toyota production method was developed was to eliminate wastes from the shop floor by utilizing some lean techniques and technologies. What wasn't made obvious was that Toyota would need to invest heavily in personnel development and training throughout a protracted leadership development process. An issue with management and leadership, as well as an incorrect understanding of human behavior and the necessary culture for success, is the failure to achieve and sustain improvement.
Download or read book Turning PDCA into a Routine for Learning written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2020-10-13 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mistakenly, many people think plan-do-check-act (PDCA) is a continuous improvement cycle, even if they neglect the human part. PDCA does aim to improve the process, but if you have only improved the process without developing and teaching your people, you have put the process at risk of slipping back. People must be trained in the culture of continuous improvement so they can keep managing the process with the new method.
Download or read book Kanban the Toyota Way An Inventory Buffering System to Eliminate Inventory written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2020-08-14 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production kanban, which translates to "sign" or "signboard" in Japanese, instructs an upstream process on the kind and number of goods to produce for a downstream process. In a pull system, a kanban is a signalling tool that provides approval and instructions for the manufacture or withdrawal (conveyance) of products. The conveyance used by the downstream process is referred to as the "withdrawal." The assembly process and the client, the assembly process and the supplier process, and the supplier process and the vendor all benefit from kanban. The Toyota production system is founded on zero inventory, but because there are natural interruptions in flow as raw materials are transformed into completed goods and supplied to customers, some required inventory must be included. The Toyota kanban system is frequently the next best option when clean flow is impossible due to processes are too far apart or the cycle times to complete the operations vary greatly.
Download or read book A Failure Mode and Effect Analysis FMEA is a systematic method for identifying and preventing product and process problems before they occur FMEAs are focused on preventing defects enhancing safety and increasing customer satisfaction FMEAs are conducted in the product design or process development stages although conducting an FMEA on existing products and processes can also yield substantial benefits Six Sigma s project team use FMEA in the Analyze stage of DMAIC because extraordinary quality is not only designed into the product it is designed into the development process itself written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Failure Mode and Effect Analysis FMEA is a systematic method for identifying and preventing product and process problems before they occur. FMEAs are focused on preventing defects, enhancing safety and increasing customer satisfaction. FMEAs are conducted in the product design or process development stages, although conducting an FMEA on existing products and processes can also yield substantial benefits. Six Sigma's project team use FMEA in the Analyze stage of DMAIC because extraordinary quality is not only designed into the product, it is designed into the development process itself.
Download or read book A Complete Guide to Just in Time Production Inside Toyota s Mind written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2023-09-28 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Yes, people called it an inventory reduction program when they first heard of it. “Just in time” is one of the main pillars in the TPS. “Just in time” ideally means “one-piece flow.” Inventory is the greatest waste in the process, and it hides many problems, such as quality problems, breakdown times, waiting waste, and more. Let’s get back to history. Prior to the 1970 oil crisis, very few people in the world know what Toyota was up to. The fact that it emerged stronger than ever while many of its competitors were quite battered made people take notice. People went to Japan to find out how Toyota had done this. What people found was that Toyota was doing something called “just in time.” In the West, this was interpreted as an inventory reduction program. As a result, it became known as the “just-in-time inventory” program. Nobody really believed inventory could be taken out of the whole value stream. Therefore, “just in time” came to mean “go beat the heck out of your suppliers.” The big three auto companies (Ford, General Motors, and Chrysler) had lots of power over their suppliers, and they became pretty expert at this tactic—to their eventual detriment. James P. Womack came forward with Lean Thinking in 1996 and helped many to see the whole value chain. He showed how waste clogs the system and how continuous improvement was needed to link all parts of the chain to customer demand. He explained his findings in plain English, but once again people didn’t hear. Lean might be an element of the larger strategy, but it is most likely to be relegated to plant and manufacturing work. As a result, one company after another has tried lean and failed. Many people believe that just-in-time inventory equals zero inventory. The ideal situation is one-piece flow, which can only be achieved through the use of a manufacturing cell. The inventory buffer exists, but it is rarely used. The Andon system includes a buffer. There is a safeguard in place to protect your customer. There is a buffer to prevent the entire manufacturing line from being shut down to rectify a problem. There is a buffer in place to prevent the breakdown of a vital manufacturing process. Just-in-time production is a manufacturing system that produces and delivers only what is required, only when it is required, and only in the amount required. The Toyota Production System is built on two pillars: JIT and jidoka. JIT is based on heijunka and consists of three operating elements: the pull system, takt time, and continuous flow.
Download or read book Takt Time A Guide to the Very Basic Lean Calculation written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2020-10-16 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Takt time is calculated as the amount of manufacturing time that is available divided by the volume of orders. In the 1930s, the German aviation industry employed Takt for the first time as a production management tool. The idea was widely used within Toyota in the 1950s, and by the late 1960s, it had been adopted by the majority of the Toyota supplier base. Every month, Toyota assesses the takt for a process, with a modifying review occurring every 10 days. Takt time is used to properly balance supply and demand. It gives a lean production system its beating heart.
Download or read book Gemba Walks the Toyota Way The Place to Teach and Learn Management written by Mohammed Hamed Ahmed Soliman and published by Mohammed Hamed Ahmed Soliman. This book was released on 2020-10-12 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gemba is a Japanese word meaning the actual place where value-creating work happens. Many leaders use gemba only for solving problems, visiting only when there is an issue. Others practice gemba walks on a daily basis to follow up and monitor the situation. However, Toyota believes that leaders truly develop through daily experiences at the gemba. In reality, gemba is a principle for managing, developing and improving people and processes. It is a valuable tool that helps lean practitioners learn the true facts so they can base management decisions on the actual situation.
