Download or read book Joernaal Van Die Suid Afrikaanse Chemiese Instituut written by and published by . This book was released on 1972 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book List of Unrestricted Mintek Publications Issued from 1966 to 1982 written by Helena Wilhelmina Glen and published by . This book was released on 1983 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication lists the 834 unrestricted reports, 449 papers, 41 patents, and 4 other technical publications that were issued as publications of the National Institute for Metallurgy (NIM) and the Council for Mineral Technology (Mintek) from 1966 (the year of NIM's inception) to 31st December, 1982. For ease of reference, these publications are also classified under research topics. Also included are details of the periodical issued by Mintek and a list of its current miscellaneous publications, which include the annual report, and brochures and leaflets of various kinds.

Download or read book Rare Metal Technology 2018 written by Hojong Kim and published by Springer. This book was released on 2018-01-04 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from a symposium on extraction of rare metals as well as rare extraction processing techniques used in metal production. Topics include the extraction and processing of elements such as antimony, arsenic, gold, indium, palladium, platinum, rare earth metals including yttrium and neodymium, titanium, tungsten, and vanadium. Rare processing techniques are covered, including direct extraction processes for rare-earth recovery, biosorption of precious metals, fluorination behavior of uranium and zirconium mixture of fuel debris treatment, and recovery of valuable components of commodity metals such as zinc, nickel, and metals from slag.

Download or read book Extractive Metallurgy of Nickel Cobalt and Platinum Group Metals written by Frank Crundwell and published by Elsevier. This book was released on 2011-07-18 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes and explains the methods by which three related ores and recyclables are made into high purity metals and chemicals, for materials processing. It focuses on present day processes and future developments rather than historical processes. Nickel, cobalt and platinum group metals are key elements for materials processing. They occur together in one book because they (i) map together on the periodic table (ii) occur together in many ores and (iii) are natural partners for further materials processing and materials manufacturing. They all are, for example, important catalysts – with platinum group metals being especially important for reducing car and truck emissions. Stainless steels and CoNiFe airplane engine super alloys are examples of practical usage. The product emphasises a sequential, building-block approach to the subject gained through the author's previous writings (particularly Extractive Metallurgy of Copper in four editions) and extensive experience. Due to the multiple metals involved and because each metal originates in several types of ore – e.g. tropical ores and arctic ores this necessitates a multi-contributor work drawing from multiple networks and both engineering and science. - Synthesizes detailed review of the fundamental chemistry and physics of extractive metallurgy with practical lessons from industrial consultancies at the leading international plants - Discusses Nickel, Cobalt and Platinum Group Metals for the first time in one book - Reviews extraction of multiple metals from the same tropical or arctic ore - Industrial, international and multidisciplinary focus on current standards of production supports best practice use of industrial resources

Download or read book Advances in Gold Ore Processing written by Mike D. Adams and published by Elsevier. This book was released on 2005-12-02 with total page 1077 pages. Available in PDF, EPUB and Kindle. Book excerpt: The gold processing industry is experiencing change. As free-milling and oxide ores become depleted, more complex polymetallic and refractory ores are being processed, coupled with increasing pressure for stricter environmental compliance. Recent years have also seen a steady reduction in mineral processing and metallurgy graduates and a gradual loss of older operating experience. A contribution to documenting current and future best practice in gold ore processing seems timely.The focus of this volume is on advances in current gold plant operation, from conception to closure; chapters also cover innovations at the bench and pilot-scale level that would be expected to find commercial application at some stage. Sufficient coverage is also given to the chemistry and engineering aspects. The general principle behind the structure of the volume is that of flowsheeting based on unit operations and applied to a mineralogical classification of gold ore types. From concept to closure, this book covers all unit operations, mineralogies and processes that are relevant to dealing with today's complex orebodies.Practical experience is vital to the successful development, operation and closure of any operation. The 42 chapters have been contributed by a total of 66 authors and co-authors who are experts from countries spanning the globe, and representing exhaustive practical knowledge covering many disciplines relevant to gold processing.* Current best practice as elucidated by a select panel of experts in the field* Innovations at the bench and pilot-scale level that would be expected to find commercial application at some stage* Mineralogical-based approach to flowsheeting

Download or read book Applications of Process Engineering Principles in Materials Processing Energy and Environmental Technologies written by Shijie Wang and published by Springer. This book was released on 2017-02-07 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection offers new research findings, innovations, and industrial technological developments in extractive metallurgy, energy and environment, and materials processing. Technical topics included in the book are thermodynamics and kinetics of metallurgical reactions, electrochemical processing of materials, plasma processing of materials, composite materials, ionic liquids, thermal energy storage, energy efficient and environmental cleaner technologies and process modeling. These topics are of interest not only to traditional base ferrous and non-ferrous metal industrial processes but also to new and upcoming technologies, and they play important roles in industrial growth and economy worldwide.

Download or read book Resource Recovery and Recycling from Metallurgical Wastes written by S.R. Ramachandra Rao and published by Elsevier. This book was released on 2011-08-29 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Resource recovery and recycling from millions of tons of wastes produced from industrial activities is a continuing challenge for environmental engineers and researchers. Demand for conservation of resources, reduction in the quantity of waste and sustainable development with environmental control has been growing in every part of the world. Resource Recovery and Recycling from Metallurgical Wastes brings together the currently used techniques of waste processing and recycling, their applications with practical examples and economic potentials of the processes. Emphasis is on resource recovery by appropriate treatment and techniques. Material on the subject is scatterend in waste management and environmental related journals, conference volumes and government departmental technical reports. This work serves as a source book of information and as an educational technical reference for practicing scientists and engineers, as well as for students. - Describes the currently used and potential techniques for the recovery of valuable resources from mineral and metallurgical wastes - Discusses the applications to specific kinds of wastes with examples from current practices, as well as eht economics of the processes - Presents recent and emerging technologies of potentials in metal recycling and by-product utilization

Download or read book The Extractive Metallurgy of Gold written by John C. Yannopoulos and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: The history of gold begins in antiquity. Bits of gold were found in Spanish caves that were used by Paleolithic people around 40,000 B.C. Gold is the "child of Zeus," wrote the Greek poet Pindar. The Romans called the yellow metal aurum ("shining dawn"). Gold is the first element and first metal mentioned in the Bible, where it appears in more than 400 references. This book provides the most thorough and up-to-date information available on the extraction of gold from its ores, starting with the miner alogy of gold ores and ending with details of refining. Each chapter con cludes with a list of references including full publication information for all works cited. Sources preceded by an asterisk (*) are especially recom mended for more in-depth study. Nine appendices, helpful to both students and operators, complement the text. I have made every attempt to keep abreast of recent technical literature on the extraction of gold. Original publications through the spring of 1989 have been reviewed and cited where appropriate. This book is intended as a reference for operators, managers, and designers of gold mills and for professional prospectors. It is also designed as a textbook for extractive metallurgy courses. I am indebted to the Library of Engineering Societies in New York, which was the main source of the references in the book. The assistance of my son, Panos, in typing the manuscript is gratefully acknowledged.

Download or read book Materials Handbook written by François Cardarelli and published by Springer Science & Business Media. This book was released on 2008-03-19 with total page 1365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique and practical book provides quick and easy access to data on the physical and chemical properties of all classes of materials. The second edition has been much expanded to include whole new families of materials while many of the existing families are broadened and refined with new material and up-to-date information. Particular emphasis is placed on the properties of common industrial materials in each class. Detailed appendices provide additional information, and careful indexing and a tabular format make the data quickly accessible. This book is an essential tool for any practitioner or academic working in materials or in engineering.

Download or read book Rare Metal Technology 2020 written by Gisele Azimi and published by Springer Nature. This book was released on 2020-01-20 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from a symposium on extraction of rare metals as well as rare extraction processing techniques used in metal production. Rare metals include strategic metals that are in increasing demand and subject to supply risks. Metals represented include neodymium, dysprosium, scandium and others; platinum group metals including platinum, palladium, iridium, and others; battery related metals including lithium, cobalt, nickel, and aluminum; electronics-related materials including copper and gold; and refectory metals including titanium, niobium, zirconium, and hafnium. Other critical materials such as gallium, germanium, indium and silicon are also included. Papers cover various processing techniques, including but not limited to hydrometallurgy (solvent extraction, ion exchange, precipitation, and crystallization), electrometallurgy (electrorefining and electrowinning), pyrometallurgy, and aeriometallurgy (supercritical fluid extraction). Contributions are focused on primary production as well as secondary production through urban mining and recycling to enable a circular economy. ​A useful resource for all involved in commodity metal production, irrespective of the major metal Provides knowledge of cross-application among industries Extraction and processing of rare metals that are the main building block of many emerging critical technologies have been receiving significant attention in recent years. The technologies that rely on critical metals are prominent worldwide, and finding a way to extract and supply them effectively is highly desirable and beneficial.

Download or read book The Periodic Table written by Paul Parsons and published by Quercus. This book was released on 2014-03-11 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: As one of the most recognizable images in science, the periodic table is ingrained in our culture. First drawn up in 1869 by Dmitri Mendeleev, its 118 elements make up not only everything on our planet but also everything in the entire universe. The Periodic Table looks at the fascinating story and surprising uses of each of those elements, whether solid, liquid or gas. From the little-known uses of gold in medicine to the development of the hydrogen bomb, each entry is accompanied by technical data (category, atomic number, weight, boiling point) presented in easy-to-read headers, and a colour coding system that helps the reader to navigate through the different groups of elements. A remarkable display of thought-provoking science and beautiful photography, this guide will allow the reader to discover the world afresh.

Download or read book Applied Industrial Catalysis written by Bruce Leach and published by Elsevier. This book was released on 2012-12-02 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Industrial Catalysis, Volume 1 provides a practical description of catalysis by industrial scientists. This book provides information pertinent to industrial catalysis, which is influenced by science, business, economic, markets, and politics. Organized into 10 chapters, this volume starts with an overview of the significance of industrial catalysis and its effect on human lifestyle and environment. This text then describes how to take a laboratory catalyst to successful commercialization with minimum problems. Other chapters consider in detail two major refinery processes, namely, hydrotreating and reforming. The reader is introduced to the specific processes for polyethylene and polypropylene manufacture. This book reviews as well ethylene oxide synthesis and explains oxychlorination of ethylene to ethylene dichloride. The final chapter reviews methanol carbonylation to acetic acid, which is produced by continuously reacting methanol and carbon monoxide in a homogeneous catalytic reactor at

Download or read book Separation Preconcentration and Spectrophotometry in Inorganic Analysis written by Z. Marczenko and published by Elsevier. This book was released on 2000-10-18 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spectrophotometry enables one to determine, with good precision and sensitivity, almost all the elements present in small and trace quantities of any material. The method is particularly useful in the determination of non-metals and allows the determination elements in a large range of concentrations (from single % to low ppm levels) in various materials.In Separation, Preconcentration and Spectrophotometry in Inorganic Analysis, much attention has been paid to separation and preconcentration methods, since they play an essential role in increasing the selectivity and sensitivity of spectrophotometric methods. Separation and preconcentration methods have also been utilised in other determination techniques.Spectrophotometric methods which are widely used for the determination of the elements in a large variety of inorganic materials are presented in the book whilst separation and preconcentration procedures combined with spectrophotometry are also described. This book contains recent advances in spectrophotometry, detailed discussion of the instrumentation, and the techniques and reagents used for spectrophotometric determination of elements in a wide range of materials as well as a detailed discussion of separation and preconcentration procedures that precede the spectrophotometric detection.

Download or read book CRC Handbook of Metal Etchants written by Perrin Walker and published by CRC Press. This book was released on 1990-12-11 with total page 1434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents cleaning and etching solutions, their applications, and results on inorganic materials. It is a comprehensive collection of etching and cleaning solutions in a single source. Chemical formulas are presented in one of three standard formats - general, electrolytic or ionized gas formats - to insure inclusion of all necessary operational data as shown in references that accompany each numbered formula. The book describes other applications of specific solutions, including their use on other metals or metallic compounds. Physical properties, association of natural and man-made minerals, and materials are shown in relationship to crystal structure, special processing techniques and solid state devices and assemblies fabricated. This publication also presents a number of organic materials which are widely used in handling and general processing...waxes, plastics, and lacquers for example. It is useful to individuals involved in study, development, and processing of metals and metallic compounds. It is invaluable for readers from the college level to industrial R & D and full-scale device fabrication, testing and sales. Scientific disciplines, work areas and individuals with great interest include: chemistry, physics, metallurgy, geology, solid state, ceramic and glass, research libraries, individuals dealing with chemical processing of inorganic materials, societies and schools.

Download or read book Encyclopedic Dictionary of Polymers written by Jan W. Gooch and published by Springer Science & Business Media. This book was released on 2010-11-08 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference, in its second edition, contains more than 7,500 polymeric material terms, including the names of chemicals, processes, formulae, and analytical methods that are used frequently in the polymer and engineering fields. In view of the evolving partnership between physical and life sciences, this title includes an appendix of biochemical and microbiological terms (thus offering previously unpublished material, distinct from all competitors.) Each succinct entry offers a broadly accessible definition as well as cross-references to related terms. Where appropriate to enhance clarity further, the volume's definitions may also offer equations, chemical structures, and other figures. The new interactive software facilitates easy access to a large database of chemical structures (2D/3D-view), audio files for pronunciation, polymer science equations and many more.

Download or read book Gold Ore Processing written by Mike D. Adams and published by Elsevier. This book was released on 2016-05-03 with total page 1050 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold Ore Processing: Project Development and Operations, Second Edition, brings together all the technical aspects relevant to modern gold ore processing, offering a practical perspective that is vital to the successful and responsible development, operation, and closure of any gold ore processing operation. This completely updated edition features coverage of established, newly implemented, and emerging technologies; updated case studies; and additional topics, including automated mineralogy and geometallurgy, cyanide code compliance, recovery of gold from e-waste, handling of gaseous emissions, mercury and arsenic, emerging non-cyanide leaching systems, hydro re-mining, water management, solid–liquid separation, and treatment of challenging ores such as double refractory carbonaceous sulfides. Outlining best practices in gold processing from a variety of perspectives, Gold Ore Processing: Project Development and Operations is a must-have reference for anyone working in the gold industry, including metallurgists, geologists, chemists, mining engineers, and many others. - Includes several new chapters presenting established, newly implemented, and emerging technologies in gold ore processing - Covers all aspects of gold ore processing, from feasibility and development stages through environmentally responsible operations, to the rehabilitation stage - Offers a mineralogy-based approach to gold ore process flowsheet development that has application to multiple ore types

Download or read book Hazardous Chemicals Handbook written by P A CARSON and published by Elsevier. This book was released on 2013-10-22 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summarizes core information for quick reference in the workplace, using tables and checklists wherever possible. Essential reading for safety officers, company managers, engineers, transport personnel, waste disposal personnel, environmental health officers, trainees on industrial training courses and engineering students. This book provides concise and clear explanation and look-up data on properties, exposure limits, flashpoints, monitoring techniques, personal protection and a host of other parameters and requirements relating to compliance with designated safe practice, control of hazards to people's health and limitation of impact on the environment. The book caters for the multitude of companies, officials and public and private employees who must comply with the regulations governing the use, storage, handling, transport and disposal of hazardous substances. Reference is made throughout to source documents and standards, and a Bibliography provides guidance to sources of wider ranging and more specialized information. Dr Phillip Carson is Safety Liaison and QA Manager at the Unilever Research Laboratory at Port Sunlight. He is a member of the Institution of Occupational Safety and Health, of the Institution of Chemical Engineers' Loss Prevention Panel and of the Chemical Industries Association's `Exposure Limits Task Force' and `Health Advisory Group'. Dr Clive Mumford is a Senior Lecturer in Chemical Engineering at the University of Aston and a consultant. He lectures on several courses of the Certificate and Diploma of the National Examining Board in Occupational Safety and Health. [Given 5 star rating] - Occupational Safety & Health, July 1994 - Loss Prevention Bulletin, April 1994 - Journal of Hazardous Materials, November 1994 - Process Safety & Environmental Prot., November 1994