Download or read book Selective Catalytic Reduction of NOx written by Oliver Kröcher and published by MDPI. This book was released on 2018-12-14 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Selective Catalytic Reduction of NOx" that was published in Catalysts
Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 2003 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structured Catalysts and Reactors written by Andrzej Cybulski and published by CRC Press. This book was released on 2005-11-02 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in structured catalysts is steadily increasing due to the already proven, as well as potential, advantages of these catalysts. Updating the comprehensive coverage of the first edition published in 1998 with the latest science and applications, Structured Catalysts and Reactors, Second Edition gives detailed information on all aspect
Download or read book Emissions Control Catalysis written by Ioannis V. Yentekakis and published by MDPI. This book was released on 2020-06-18 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: The important advances achieved over the past years in all technological directions (industry, energy, and health) contributing to human well-being are unfortunately, in many cases, accompanied by a threat to the environment, with photochemical smog, stratospheric ozone depletion, acid rain, global warming, and finally climate change being the most well-known major issues. These are the results of a variety of pollutants emitted through these human activities. The indications show that we are already at a tipping point that might lead to non-linear and sudden environmental change on a global scale. Aiming to tackle these adverse effects in an attempt to mitigate any damage that has already occurred and to ensure that we are heading toward a cleaner (green) and sustainable future, scientists around the world are developing tools and techniques to understand, monitor, protect, and improve the environment. Emissions control catalysis is continuously advancing, providing novel, multifunctional, and optimally promoted using a variety of methods, nano-structured catalytic materials, and strategies (e.g., energy chemicals recycling, cyclic economy) that enable us to effectively control emissions, either of mobile or stationary sources, improving the quality of air (outdoor and indoor) and water and the energy economy. Representative cases include the abatement and/or recycling of CO2, CO, NOx, N2O, NH3, CH4, higher hydrocarbons, volatile organic compounds (VOCs), particulate matter, and specific industrial emissions (e.g., SOx, H2S, dioxins aromatics, and biogas). The “Emissions Control Catalysis” Special Issue has succeeded in collecting 22 high-quality contributions, included in this MDPI open access book, covering recent research progress in a variety of fields relevant to the above topics and/or applications, mainly on: (i) NOx catalytic reduction from cars (i.e., TWC) and industry (SCR) emissions; (ii) CO, CH4, and other hydrocarbons removal, and (iii) CO2 capture/recirculation combining emissions control with added-value chemicals production.
Download or read book Urea SCR Technology for deNOx After Treatment of Diesel Exhausts written by Isabella Nova and published by Springer Science & Business Media. This book was released on 2014-03-14 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urea-SCR Technology for deNOx After Treatment of Diesel Exhausts presents a complete overview of the selective catalytic reduction of NOx by ammonia/urea. The book starts with an illustration of the technology in the framework of the current context (legislation, market, system configurations), covers the fundamental aspects of the SCR process (catalysts, chemistry, mechanism, kinetics) and analyzes its application to useful topics such as modeling of full scale monolith catalysts, control aspects, ammonia injections systems and integration with other devices for combined removal of pollutants.
Download or read book Environmental Catalysis written by John N. Armor and published by American Chemical Society. This book was released on 1994 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive volume on the major aspects of environmental catalysis. Focuses on NO x removal, mobile engine emission controls, power plant emissions, control of volatile organic compounds, SO x emissions, and waste minimization. Overview chapters introduce each section and provide added perspective and coverage. Includes comprehensive technical reports on automotive and diesel emission control catalysis, NO x removal, and removal of chlorinated hydrocarbons from various process streams.
Download or read book New Concepts in Oxidation Processes written by Eric Genty and published by MDPI. This book was released on 2020-03-06 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue of Catalysts aims to cover the recent progress and novel trends in the field of catalytic oxidation reaction. Topics addressed in this special issue concern the influence of different parameters on catalytic activity at various scales (atomic, laboratory, pilot, or industrial scales), the development of new catalytic materials of environmental or industrial importance, as well as the development of new methods, both microscopic and spectroscopic, to analyze oxidation processes.
Download or read book British National Bibliography for Report Literature written by and published by . This book was released on 1998-07 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxides written by J.L.G. Fierro and published by CRC Press. This book was released on 2005-08-24 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chemistry of metals has traditionally been more understood than that of its oxides. As catalytic applications continue to grow in a variety of disciplines, Metal Oxides: Chemistry and Applications offers a timely account of transition-metal oxides (TMO), one of the most important classes of metal oxides, in the context of catalysis. The
Download or read book Combinatorial Catalysis and High Throughput Catalyst Design and Testing written by E.G. Derouane and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysts are central in modern industrial chemistry and there is an urgent need to develop new catalysts. Such a rapid pace of development brings with it a new set of challenges at all levels of research, from synthesis and characterization to testing and modelling. This book reviews the current status of combinatorial catalysis, scientific catalyst design techniques, methods for preparing inorganic combinatorial libraries, experimental design methods, data processing, system modelling an simulation, and catalyst testing. The individual contributions reveal the development of high throughput catalyst design and test methods and identify the main challenges in the field, including new catalyst preparation techniques, rapid performance evaluation, and new microreactor configurations. Readership: All those working in catalytic process analysis and development. The extensive review of catalysis principles is especially relevant for postgraduate students seeking to pursue studies in catalysis.
Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.
Download or read book Process and Chemical Engineering written by and published by . This book was released on 2002 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. - Presents case studies in each chapter that provide a focus on the industrial applications - Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource - Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications
Download or read book XAFS Techniques for Catalysts Nanomaterials and Surfaces written by Yasuhiro Iwasawa and published by Springer. This book was released on 2016-10-19 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive, theoretical, practical, and thorough guide to XAFS spectroscopy. The book addresses XAFS fundamentals such as experiments, theory and data analysis, advanced XAFS methods such as operando XAFS, time-resolved XAFS, spatially resolved XAFS, total-reflection XAFS, high energy resolution XAFS, and practical applications to a variety of catalysts, nanomaterials and surfaces. This book is accessible to a broad audience in academia and industry, and will be a useful guide for researchers entering the subject and graduate students in a wide variety of disciplines.
Download or read book Horizons in Sustainable Industrial Chemistry and Catalysis written by Stefania Albonetti and published by Elsevier. This book was released on 2019-02-13 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Horizons in Sustainable Industrial Chemistry and Catalysis, Volume 178, presents a comprehensive picture of recent developments in terms of sustainable industrial processes and the catalytic needs and opportunities to develop these novel routes. Each chapter includes an introduction and state-of-the-art in the field, along with a series of specific aspects and examples. The book identifies new opportunities for research that will help us transition to low carbon and sustainable energy and chemical production. Users will find an integrated view of the new possibilities in this area that unleashes new possibilities in energy and chemistry. - Combines an analysis of each scenario, the state-of-the art, and specific examples to help users better understand needs, opportunities, gaps and challenges - Offers an integrated view of new catalytic technologies that are needed for future use - Presents an interdisciplinary approach that combines broad expertise - Brings together experts in the area of sustainable industrial chemistry
Download or read book Metal Oxide Catalysis 2 Volume Set written by S. David Jackson and published by John Wiley & Sons. This book was released on 2008-12-23 with total page 887 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its two-volume structure, this handbook and ready reference allows for comprehensive coverage of both characterization and applications, while uniform editing throughout ensures that the structure remains consistent. The result is an up-to-date review of metal oxides in catalysis. The first volume covers a range of techniques that are used to characterize oxides, with each chapter written by an expert in the field. Volume 2 goes on to cover the use of metal oxides in catalytic reactions. For all chemists and engineers working in the field of heterogeneous catalysis.
