Download or read book The Pressuremeter and Its New Avenues written by Gerard Ballivy and published by CRC Press. This book was released on 1995-01-01 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressuremeter testing activities are of great interest for scientists and engineers concerned with the mechanical behaviour of civil engineering materials. The proceedings include the first Menard Lecture presented by Professor Branko Ladanyi and 57 technical papers from 16 countries. They are related to the application of pressuremeter testing to granular and alluvial soils, clay, rock, concrete and permafrost, and geotechnical design. It also includes a session on technological developments in the design, fabrication and installation of pressuremeters.
Download or read book Advances in Site Investigation Practice written by Institution of Civil Engineers (Great Britain) and published by Thomas Telford. This book was released on 1996 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings of the international conference on advances in site investigation practice held in 1995 provide vital information for all professionals involved in the planning, execution, interpretation and applications of site investigations. It draws together the research and experience of many of the most eminent professional engineers and academics, presenting a substantial body of knowledge.
Download or read book Characterisation and Engineering Properties of Natural Soils Two Volume Set written by T.S. Tan and published by CRC Press. This book was released on 2006-11-16 with total page 1252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following on from the first two volumes, published in 2002, volumes 3 and 4 of Characterisation and Engineering Properties of Natural Soils review laboratory testing, in-situ testing, and methods of characterising natural soil variability, illustrated by actual site data. Less well-documented soil types are highlighted and the various papers take i
Download or read book High Resolution Pressuremeters and Geotechnical Engineering written by John Hughes and published by CRC Press. This book was released on 2022-10-12 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Resolution Pressuremeters and Geotechnical Engineering focuses on pressuremeters with internal transducers that allow measurement of strength, stiffness and in situ reference stress. It outlines the principles and the basics of the technology, gives guidance on good practice and making reliable analysis, provides case studies, and compares the pressuremeter test with similar ones from other devices to enable engineers to make informed choices. A unique, up-to-date guide to high resolution pressuremeters with internal transducers Contextualises analyses and advice to enable an informed choice of testing processes Presents analyses previously unpublished in book form This practical guide will suit professionals at the consultancy level, pressuremeter practitioners and site investigation companies.
Download or read book Cone Penetration Testing 2022 written by Guido Gottardi and published by CRC Press. This book was released on 2022-11-11 with total page 1205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This abstracts volume (including full keynote and invited papers) contains the proceedings of the 5th International Symposium on Cone Penetration Testing (CPT’22), held in Bologna, Italy, 8-10 June 2022. More than 500 authors - academics, researchers, practitioners and manufacturers – contributed to the peer-reviewed papers included in this book, which includes three keynote lectures, four invited lectures and 169 technical papers. The contributions provide a full picture of the current knowledge and major trends in CPT research and development, with respect to innovations in instrumentation, latest advances in data interpretation, and emerging fields of CPT application. The paper topics encompass three well-established topic categories typically addressed in CPT events: - Equipment and Procedures - Data Interpretation - Applications. Emphasis is placed on the use of statistical approaches and innovative numerical strategies for CPT data interpretation, liquefaction studies, application of CPT to offshore engineering, comparative studies between CPT and other in-situ tests. Cone Penetration Testing 2022 contains a wealth of information that could be useful for researchers, practitioners and all those working in the broad and dynamic field of cone penetration testing.
Download or read book In Situ Testing Methods in Geotechnical Engineering written by Alan J. Lutenegger and published by CRC Press. This book was released on 2021-05-03 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Situ Testing Methods in Geotechnical Engineering covers the field of applied geotechnical engineering related to the use of in situ testing of soils to determine soil properties and parameters for geotechnical design. It provides an overview of the practical aspects of the most routine and common test methods, as well as test methods that engineers may wish to include on specific projects. It is suited for a graduate-level course on field testing of soils and will also aid practicing engineers. Test procedures for determining in situ lateral stress, strength, and stiffness properties of soils are examined, as is the determination of stress history and rate of consolidation. Readers will be introduced to various approaches to geotechnical design of shallow and deep foundations using in situ tests. Importantly, the text discusses the potential advantages and disadvantages of using in situ tests.
Download or read book Geotechnical Characterization and Modelling written by Madhavi Latha Gali and published by Springer Nature. This book was released on 2020-09-18 with total page 1098 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select papers presented during the Indian Geotechnical Conference 2018, discussing issues and challenges relating to the characterization of geomaterials, modelling approaches, and geotechnical engineering education. With a combination of field studies, laboratory experiments and modelling approaches, the chapters in this volume address some of the most widely investigated geotechnical engineering topics. This volume will be of interest to researchers and practitioners alike.
Download or read book Characterisation and Engineering Properties of Natural Soils written by T. S. Tan and published by CRC Press. This book was released on 2003 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume of a specialty 2-volume works contains 34 papers pertaining to the natural behaviour of diverse geomaterials found in different parts of the world. Each paper is organized along the outline: location and distribution, engineering geology, composition, state and index properties, structure, engineering properties, quality / reliability of data with reference to methods of sampling and testing, and relation to engineering problems. This extensive body of collated knowledge is integrated by three overview papers covering engineering geology, mechanical behaviour and engineering implications. Topics: Overview papers; Marine clays; Eastuarine Clays; Lacustrine clays; Stiff clays; Sands and other cohesionless soils; Residual and other tropical Soils; Weak rock.
Download or read book On Linear Elastic Cross Anisotropic Rock written by Anastasia Blioumi and published by Logos Verlag Berlin GmbH. This book was released on 2014 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: English summary: Rocks composed of parallel layers are cross-anisotropic materials. This thesis describes a new approximate solution for the determination of the properties of these materials based on mold cavity expansion experiments. German description: Gesteine, die aus parallelen Schichten bestehen, sind quer-anisotrope Materialien. Die Disseration beschreibt eine neue Naherungslosung zur Bestimmung der Eigenschaften solcher Materialien, basierend auf Hohlraumaufweitungs- Versuchen. Daten aus Radialpressversuchen dienen der inversen Analyse des Problems. Wenn der innere Druck, der Radius des Hohlraums, die Orientierung der Schieferung und die Verschiebungen bekannt sind, ergibt die Naherungslosung Materialparameter-Kombinationen, die die gemessenen Verschiebungen gut abbilden. Die Losung ist jedoch nicht eindeutig. Dreidimensionale Finite Elemente Modellierung wird in dieser Arbeit verwendet, um Hohlraumaufweitung in linear-elastischem, quer-anisotropem Gestein zu simulieren. Eine numerische Untersuchung wird durchgefuhrt, um das Modell richtig zu etablieren (Randbediengungen, Grosse des Diskretisierungsbereichs usw.) und die moglichen Einflussgrossen (z. B. Genauigkeit der Bestimmung der Schieferungsorientierung) zu beurteilen. Die Ergebnisse der Feldmessungen werden dann mit den numerisch berechneten radialen Verschiebungen der Hohlraumwand verglichen. Letztere entstehen durch die Implementierung von Materialparametern, die aus der genannten Naherungslosung zuruckgerechnet werden. Ahnlichkeiten und Unterschiede werden beschrieben und erklart. Eine alternative Methode zur Ermittlung des Verhaltens von quer-anisotropen Materialien mittels kleinmassstablicher Hohlraumaufweitungs-Laborversuche in einem kunstlichen queranisotropen Material ist ebenfalls erwogen worden. Der Aufbau und die Prinzipien eines solchen Versuchs werden beschrieben und dessen Ausfuhrbarkeit wird untersucht.
Download or read book Proceedings of the 16th International Conference on Soil Mechanics and Geotechnical Engineering written by The Organizing Committee of the 16th ICSMGE and published by IOS Press. This book was released on 2005-09-12 with total page 3742 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th ICSMGE responds to the needs of the engineering and construction community, promoting dialog and exchange between academia and practice in various aspects of soil mechanics and geotechnical engineering. This is reflected in the central theme of the conference 'Geotechnology in Harmony with the Global Environment'. The proceedings of the conference are of great interest for geo-engineers and researchers in soil mechanics and geotechnical engineering. Volume 1 contains 5 plenary session lectures, the Terzaghi Oration, Heritage Lecture, and 3 papers presented in the major project session. Volumes 2, 3, and 4 contain papers with the following topics: Soil mechanics in general; Infrastructure and mobility; Environmental issues of geotechnical engineering; Enhancing natural disaster reduction systems; Professional practice and education. Volume 5 contains the report of practitioner/academic forum, 20 general reports, a summary of the sessions and workshops held during the conference.
Download or read book Geotechnical Hazards written by Z. Lisac and published by CRC Press. This book was released on 2020-12-17 with total page 907 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions to this volume examine: geotechnical hazard acknowledging the deversity of local ground conditions and environmental factors which play a decisive role in designing engineering structures in Danubian countries.
Download or read book In Situ Testing in Geomechanics written by Fernando Schnaid and published by CRC Press. This book was released on 2009-01-13 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demanding a thorough knowledge of material behaviour and numerical modelling, site characterisation and in situ test interpretation are no longer just basic empirical recommendations. Giving a critical appraisal of the understanding and assessment of the stress-strain-time and strength characteristics of geomaterials, this book explores new interpretation methods for measuring properties of a variety of soil formations. Emphasis is given to the five most commonly encountered in situ test techniques: standard penetration tests cone penetration tests vane test pressuremeter tests dilatometer tests Ideal for practising engineers in the fields of geomechanics and environmental engineering, this book solves numerous common problems in site characterisation. It is also a valuable companion for students coming to the end of their engineering courses and looking to work in this sector.
Download or read book Application of Numerical Methods to Geotechnical Problems written by Annamaria Cividini and published by Springer. This book was released on 2014-05-04 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NUMGE98 Conference brought together senior and young researchers, scientists and practicing engineers from European and overseas countries, to share their knowledge and experience on the various aspects of the analysis of Geotechnical Problems through Numerical Methods. The papers address a broad spectrum of geotechnical problems, including tunnels and underground openings, shallow and deep foundations, slope stability, seepage and consolidation, partially saturated soils, geothermal effects, constitutive modelling, etc.
Download or read book Advances in Geotechnical Engineering written by R. J. Jardine and published by Thomas Telford. This book was released on 2004 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main body of the first volume is taken up by five major keynote papers written by a team of international experts, that survey the enormous advances that have taken place in geotechnical engineering since Skempton's pioneering early work. The second volume contains more than 80 articles that report recent research and advances in practice from around the world. The papers focus on the broad range of geotechnical issues, that most interested Professor Skempton, and are grouped under the headings of: - Soil behaviour, characterisation and modelling - Foundations - Slopes and embankments - Ground performance - The influence of geology on civil engineering.
Download or read book Integrating Innovations of Rock Mechanics written by R.J. Rocca and published by IOS Press. This book was released on 2015-12-11 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: In November 2015, Buenos Aires, Argentina became the location of several important events for geo-professionals, with the simultaneous holding of the 8th South American Congress on Rock Mechanics (SCRM), the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE), and the 6th International Symposium on Deformation Characteristics of Geomaterials, as well as the 22nd Argentinean Congress of Geotechnical Engineering (CAMSIGXXII). This synergy brought together international experts, researchers, academics, professionals and geo-engineering companies in a unique opportunity to exchange ideas and discuss current and future practices in the areas of soil mechanics and rock mechanics, and their applications in civil, energy, environmental, and mining engineering. This book presents the proceedings of the 8th South American Congress on Rock Mechanics (SCRM). Topics covered include rock mechanics, rock engineering, natural resources, mining, mechanics, geology and engineering. Approximately 60% of the contributions are in English, and the remaining 40% of the contributions are in either Spanish or Portuguese.
Download or read book Construction Technology for Tall Buildings written by M. Y. L. Chew and published by World Scientific. This book was released on 2001 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This study describes current construction practices and processes for tall buildings from foundation to roof. It discusses the construction sequence of the various proprietary systems and their merits and disadvantages.
Download or read book Construction Technology For Tall Buildings 3rd Edition written by Yit Lin Michael Chew and published by World Scientific Publishing Company. This book was released on 2009-01-13 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the latest construction practices and processes for tall buildings from foundation to roof. It attempts to acquaint readers with the methods, materials, equipment and systems used for the construction of tall buildings.The text progresses through the stages of site investigation, excavation and foundations, basement construction, structural systems for the superstructure, site and material handling, wall and floor construction, cladding and roof construction. The construction sequence, merits and limitations of the various proprietary systems commonly used in these respective stages are discussed. This third edition also includes several new topics not covered in the previous edition.