Download or read book ACI Manual of Concrete Inspection written by and published by American Concrete Institute. This book was released on 2008 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual is intended to guide, assist, and instruct concrete inspectors and others engaged in concrete construction and testing, including field engineers, construction superintendents, supervisors, laboratory and field technicians, and workers. Designers may also find the manual to be a valuable reference by using the information to better adapt their designs to the realities of field construction. Because of the diverse possible uses of the manual and the varied backgrounds of the readers, it includes the reasoning behind the technical instructions. The field of concrete construction has expanded dramatically over the years to reflect the many advances that have taken place in the concrete industry. Although many of the fundamentals presented in previous editions of this manual remain relevant and technically correct, this eleventh edition incorporates new material to address these advances in technology

Download or read book Journal of the American Concrete Institute written by American Concrete Institute and published by . This book was released on 1983 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Each number includes "Synopsis of recent articles."

Download or read book Guide to the Selection and Use of Hydraulic Cements written by American Concrete Institute and published by . This book was released on 1999 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Lightweight Aggregate Concrete written by Satish Chandra and published by Elsevier. This book was released on 2002-10-28 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: In spite of the increasing use and demand for lightweight aggregate concrete (LWAC), there is still a lack of adequate explanations to understand the mechanisms responsible for the strength and durability properties of LWAC. This book is written to give an overall picture of LWAC, from the historical background, aggregate production, proportioning and production of concrete, to applications in structures. Physical properties and chemical durability are described in detail. The physical properties include density, strength, shrinkage, and elasticity. Chemical durability includes resistance to acids, chloride ingress, carbonation, and freeze-thaw resistance. Fire resistance is also included, which is seldom considered, but is a very important aspect of the safety of the structure. Microstructure development and its relation to the durability properties of LWAC generally are not highlighted in the literature. The development of bonds, the microstructure with different binder systems, and different types of lightweight aggregates are explained. They show how lightweight aggregate concrete differs from normal weight concrete. The chapters on chloride ingress and freeze-thaw resistance are detailed because of the use of LWAC in offshore construction. The economical aspects of using LWAC are also reviewed. Emphasis is placed on the fact that although the cost of LWAC is high, the total cost of construction has to be considered, including the cost of transport, reinforcement, etc. When these are considered then LWAC becomes cheaper and attractive. The life cycle cost of the concrete is another consideration for calculating long-term savings on maintenance costs.

Download or read book Civil Works Annual Research Development Summary written by and published by . This book was released on 1979 with total page 1372 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cement Based Materials written by Hosam El-Din M. Saleh and published by BoD – Books on Demand. This book was released on 2018-10-10 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cement-based materials have been used by humans nearly since the dawn of civilization. The Egyptians used lime and gypsum cement to bind their aggregate materials, mud and straw, resulting in bricks that are used for building their famous Egyptian pyramids (between 3000 and 2500 BC). Hydrated cement is a cement material bonded together with water and used for building construction; it is characterized by acceptable chemical, physical, thermal, mechanical, and structural stability. It plays a main role in the creation of vessels for storage, roads to travel on, weather-resistant structure for protection, inert hard stabilizer for hazardous wastes, and so on. Due to the composition of these materials and their advantages, it has been practiced in different applications. Cement is an essential component of making concrete, the single most prevalent building material used worldwide for construction, skyscrapers, highways, tunnels, bridges, hydraulic dams, and railway ties. Besides their numerous desired properties, there are some undesirable features. To overcome these disadvantages, several studies were established to prepare, improve, and evaluate innovative cement-based materials. Despite its oldness and deep research, every year several methods and materials evolve and so do cement technology. This book intends to provide a comprehensive overview on recent advances in the evaluation of these materials.

Download or read book Lime and Other Alternative Cements written by Neville Hill and published by Intermediate Technology. This book was released on 1992 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: A recurring theme in the book is the need to work towards the wider acceptance of lime, and alternative binders by: establishing realistic performance standards for alternative cements and getting these standards accepted in international, national and local building codes and standards.

Download or read book Cementitious Materials written by Herbert Pöllmann and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-12-18 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aside from water the materials which are used by mankind in highest quantities arecementitious materials and concrete. This book shows how the quality of the technical product depends on mineral phases and their reactions during the hydration and strengthening process. Additives and admixtures infl uence the course of hydration and the properties. Options of reducing the CO2-production in cementitious materials are presented and numerous examples of unhydrous and hydrous phases and their formation conditions are discussed. This editorial work consists of four parts including cement composition and hydration, Special cement and binder mineral phases, Cementitious and binder materials, and Measurement and properties. Every part contains different contributions and covers a broad range within the area. Contents Part I: Cement composition and hydration Diffraction and crystallography applied to anhydrous cements Diffraction and crystallography applied to hydrating cements Synthesis of highly reactive pure cement phases Thermodynamic modelling of cement hydration: Portland cements – blended cements – calcium sulfoaluminate cements Part II: Special cement and binder mineral phases Role of hydrotalcite-type layered double hydroxides in delayed pozzolanic reactions and their bearing on mortar dating Setting control of CAC by substituted acetic acids and crystal structures of their calcium salts Crystallography and crystal chemistry of AFm phases related to cement chemistry Part III: Cementitious and binder materials Chemistry, design and application of hybrid alkali activated binders Binding materials based on calcium sulphates Magnesia building material (Sorel cement) – from basics to application New CO2-reduced cementitious systems Composition and properties of ternary binders Part IV: Measurement and properties Characterization of microstructural properties of Portland cements by analytical scanning electron microscopy Correlating XRD data with technological properties No cement production without refractories

Download or read book Cement written by Friedrich W. Locher and published by Verlag Bau+Technik. This book was released on 2013-03-20 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: The successful launch of the German standard work on cement by Prof. Locher in 2000 is now being followed by the publication of the widely requested English language version "Cement" which takes special country-specific features and standards into account. The book is aimed at chemists, physicists, engineers and technologists in the cement industry, in machine construction, the construction industry, materials testing and environmental protection. This clear and practical book will provide them with the understanding of the chemistry of cement needed for their daily work. It will also make an ideal textbook for the study of building materials science at colleges and universities.

Download or read book Use of Fly Ash in Concrete written by and published by . This book was released on 1989 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Control of Concrete Mixtures written by Steven H. Kosmatka and published by . This book was released on 1988 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Portland Cement Association reference, dealing with fundamentals, cold weather concreting, curing, admixtures, aggregates, mixing, and much more.

Download or read book Eco Efficient Concrete written by Fernando Pacheco-Torgal and published by Elsevier. This book was released on 2013-02-04 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eco-efficient concrete is a comprehensive guide to the characteristics and environmental performance of key concrete types.Part one discusses the eco-efficiency and life cycle assessment of Portland cement concrete, before part two goes on to consider concrete with supplementary cementitious materials (SCMs). Concrete with non-reactive wastes is the focus of part three, including municipal solid waste incinerator (MSWI) concrete, and concrete with polymeric, construction and demolition wastes (CDW). An eco-efficient approach to concrete carbonation is also reviewed, followed by an investigation in part four of future alternative binders and the use of nano and biotech in concrete production.With its distinguished editors and international team of expert contributors, Eco-efficient concrete is a technical guide for all professionals, researchers and academics currently or potentially involved in the design, manufacture and use of eco-efficient concrete. - The first part of the book examines the eco-efficiency and life cycle assessment of Portland cement concrete - Chapters in the second part of the book consider concrete with supplementary cementitious materials, including properties and performance - Reviews the eco-efficient approach to concrete carbonation

Download or read book Performance of Cement Based Materials in Aggressive Aqueous Environments written by Mark Alexander and published by Springer Science & Business Media. This book was released on 2012-12-18 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete and cement-based materials must operate in increasingly aggressive aqueous environments, which may be either natural or industrial. These materials may suffer degradation in which ion addition and/or ion exchange reactions occur, leading to a breakdown of the matrix microstructure and consequent weakening. Sometimes this degradation can be extremely rapid and serious such as in acidic environments, while in other cases degradation occurs over long periods. Consequences of material failure are usually severe – adversely affecting the health and well-being of human communities and disturbing ecological balances. There are also large direct costs of maintaining and replacing deteriorated infrastructure and indirect costs from loss of production during maintenance work, which place a great burden on society. The focus of this book is on addressing issues concerning performance of cement-based materials in aggressive aqueous environments , by way of this State-of-the-Art Report. The book represents the work of many well-known and respected authors who contributed chapters or parts of chapters. Four main themes were addressed: I. Nature and kinetics of degradation and deterioration mechanisms of cement-based materials in aggressive aqueous environments, II. Modelling of deterioration in such environments, III. Test methods to assess performance of cement-based materials in such environments, and which can be used to characterise and rate relative performance and inform long term predictions, IV. Engineering implications and consequences of deterioration in aggressive aqueous environments, and engineering approaches to the problem.

Download or read book Cement Production Technology written by Anjan Kumar Chatterjee and published by CRC Press. This book was released on 2018-04-27 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is an outcome of the author’s active professional involvement in research, manufacture and consultancy in the field of cement chemistry and process engineering. This multidisciplinary title on cement production technology covers the entire process spectrum of cement production, starting from extraction and winning of natural raw materials to the finished products including the environmental impacts and research trends. The book has an overtone of practice supported by the back-up principles.

Download or read book A Practical Guide to Microstructural Analysis of Cementitious Materials written by Karen Scrivener and published by CRC Press. This book was released on 2018-10-09 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide from Top-Level Industry Scientists As advanced teaching and training in the development of cementitious materials increase, the need has emerged for an up-to-date practical guide to the field suitable for graduate students and junior and general practitioners. Get the Best Use of Different Techniques and Interpretations of the Results This edited volume provides the cement science community with a state-of-the-art overview of analytical techniques used in cement chemistry to study the hydration and microstructure of cements. Each chapter focuses on a specific technique, not only describing the basic principles behind the technique, but also providing essential, practical details on its application to the study of cement hydration. Each chapter sets out present best practice, and draws attention to the limitations and potential experimental pitfalls of the technique. Databases that supply examples and that support the analysis and interpretation of the experimental results strengthen a very valuable ready reference. Utilizing the day-to-day experience of practical experts in the field, this book: Covers sample preparation issues Discusses commonly used techniques for identifying and quantifying the phases making up cementitious materials (X-ray diffraction and thermogravimetric analysis) Presents good practice oncalorimetry and chemical shrinkage methods for studying cement hydration kinetics Examines two different applications of nuclear magnetic resonance (solid state NMR and proton relaxometry) Takes a look at electron microscopy, the preeminent microstructural characterization technique for cementitious materials Explains how to use and interpret mercury intrusion porosimetry Details techniques for powder characterization of cementitious materials Outlines the practical application of phase diagrams for hydrated cements Avoid common pitfalls by using A Practical Guide to Microstructural Analysis of Cementitious Materials. A one-of-a-kind reference providing the do’s and don’ts of cement chemistry, the book presents the latest research and development of characterisation techniques for cementitious materials, and serves as an invaluable resource for practicing professionals specializing in cement and concrete materials and other areas of cement and concrete technology.

Download or read book Admixtures in Concrete written by National Research Council (U.S.). Highway Research Board. Committee on Chemical Additions and Admixtures for Concrete and published by . This book was released on 1971 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: An admixture is any material other than water, aggregates, and hydraulic cement that is used as an ingredient of a concrete or mortar mixture and added to the batch immediately before or during mixing. 4 types of admixtures are discussed: (1) accelerators, the most common of which is calcium chloride; (2) air-entraining, to protect the concrete against the damage it may suffer if the paste becomes saturated with water and then freezes; (3) retarders and water reducers, which extend setting time 30 to 50 percent to compensate for placement temperatures, to avoid cold joints, or to avoid undesirable effects of displacements and deflections; and (4) pozzolans, which react with hydroxides to form compounds with cementitious properties, and usually produce a lower cost concrete.

Download or read book Concrete Microstructure Properties and Materials written by P. Mehta and published by McGraw Hill Professional. This book was released on 2005-09-26 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents the art and science of concrete in a simple, clear, hands-on manner, focusing on the following: Cement and concrete are predicted to be the premier building material of the 21st Century; Includes unique diagrams, photographs, and summary tables; Updated to include new chapters on non-destructive methods for concrete; future challenges in concrete technology; an increased number of examples of concrete applications; and new developments in durability.