Download or read book Orifice Plates and Venturi Tubes written by Michael Reader-Harris and published by Springer. This book was released on 2015-04-29 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives the background to differential-pressure flow measurement and goes through the requirements explaining the reason for them. For those who want to use an orifice plate or a Venturi tube the standard ISO 5167 and its associated Technical Reports give the instructions required. However, they rarely tell the users why they should follow certain instructions. This book helps users of the ISO standards for orifice plates and Venturi tubes to understand the reasons why the standards are as they are, to apply them effectively, and to understand the consequences of deviations from the standards.
Download or read book Flow Measurement Handbook written by R. C. Baker and published by Cambridge University Press. This book was released on 2000-05-29 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical, comprehensive advice on the design, operation, and performance of flowmeters.
Download or read book Multiphase Flow Metering written by Gioia Falcone and published by Elsevier. This book was released on 2009-11-16 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last two decades the development, evaluation and use of MFM systems has been a major focus for the Oil & Gas industry worldwide. Since the early 1990's, when the first commercial meters started to appear, there have been around 2,000 field applications of MFM for field allocation, production optimisation and well testing. So far, many alternative metering systems have been developed, but none of them can be referred to as generally applicable or universally accurate. Both established and novel technologies suitable to measure the flow rates of gas, oil and water in a three-phase flow are reviewed and assessed within this book. Those technologies already implemented in the various commercial meters are evaluated in terms of operational and economical advantages or shortcomings from an operator point of view. The lessons learned about the practical reliability, accuracy and use of the available technology is discussed. The book suggests where the research to develop the next generation of MFM devices will be focused in order to meet the as yet unsolved problems. The book provides a critical and independent review of the current status and future trends of MFM, supported by the authors' strong background on multiphase flow and by practical examples. These are based on the authors' direct experience on MFM, gained over many years of research in connection with both operators and service companies. As there are currently no books on the subject of Multiphase Flow Metering for the Oil & Gas industry, this book will fill in the gap and provide a theoretical and practical reference for professionals, academics, and students.* Written by leading scholars and industry experts of international standing* Includes strong coverage of the theoretical background, yet also provides practical examples and current developments* Provides practical reference for professionals, students and academics
Download or read book Custody Transfer and Fiscal Flow Measurement by Ultrasonic Meters written by Alcir de Faro Orlando and published by Cambridge Scholars Publishing. This book was released on 2024-05-21 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes how to calibrate, measure and specify ultrasonic flow meters to ensure that the legal metrology requirements are met in custody transfer and fiscal applications. This book is intended for metrologists who are in charge of specifying ultrasonic flow meters, calibrating or accurately measuring water, oil and natural gas flowrate in custody transfer and fiscal measurement applications, and require a deep knowledge of the measurement principles and the results that can be achieved, so that the legal metrology requirements can be met.
Download or read book Fluid Flow Measurement written by Paul J. LaNasa and published by Butterworth-Heinemann. This book was released on 2014-04-12 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a tendency to make flow measurement a highly theoretical and technical subject but what most influences quality measurement is the practical application of meters, metering principles, and metering equipment and the use of quality equipment that can continue to function through the years with proper maintenance have the most influence in obtaining quality measurement. This guide provides a review of basic laws and principles, an overview of physical characteristics and behavior of gases and liquids, and a look at the dynamics of flow. The authors examine applications of specific meters, readout and related devices, and proving systems. Practical guidelines for the meter in use, condition of the fluid, details of the entire metering system, installation and operation, and the timing and quality of maintenance are also included. This book is dedicated to condensing and sharing the authors' extensive experience in solving flow measurement problems with design engineers, operating personnel (from top supervisors to the newest testers), academically-based engineers, engineers of the manufacturers of flow meter equipment, worldwide practitioners, theorists, and people just getting into the business. - The authors' many years of experience are brought to bear in a thorough review of fluid flow measurement methods and applications - Avoids theory and focuses on presentation of practical data for the novice and veteran engineer - Useful for a wide range of engineers and technicians (as well as students) in a wide range of industries and applications
Download or read book Fundamentals of Electric Propulsion written by Dan M. Goebel and published by John Wiley & Sons. This book was released on 2008-12-22 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Throughout most of the twentieth century, electric propulsion was considered the technology of the future. Now, the future has arrived. This important new book explains the fundamentals of electric propulsion for spacecraft and describes in detail the physics and characteristics of the two major electric thrusters in use today, ion and Hall thrusters. The authors provide an introduction to plasma physics in order to allow readers to understand the models and derivations used in determining electric thruster performance. They then go on to present detailed explanations of: Thruster principles Ion thruster plasma generators and accelerator grids Hollow cathodes Hall thrusters Ion and Hall thruster plumes Flight ion and Hall thrusters Based largely on research and development performed at the Jet Propulsion Laboratory (JPL) and complemented with scores of tables, figures, homework problems, and references, Fundamentals of Electric Propulsion: Ion and Hall Thrusters is an indispensable textbook for advanced undergraduate and graduate students who are preparing to enter the aerospace industry. It also serves as an equally valuable resource for professional engineers already at work in the field.
Download or read book Introduction to Aircraft Flight Mechanics written by Thomas R. Yechout and published by AIAA. This book was released on 2003 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a 15-year successful approach to teaching aircraft flight mechanics at the US Air Force Academy, this text explains the concepts and derivations of equations for aircraft flight mechanics. It covers aircraft performance, static stability, aircraft dynamics stability and feedback control.
Download or read book Data for Room Fire Model Comparisons written by Richard D. Peacock and published by DIANE Publishing. This book was released on 1993-12 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the types of analyses that can be used to examine large-scale room fire test data to prepare the data for comparison with zone-based fire models. The base of experimental data ranges in complexity from one room tests with individual furniture items to a series of tests conducted in a multiple story hotel equipped with a zoned smoke control system. Graphs and diagrams.
Download or read book Natural Gas Measurement Handbook written by James E. Gallagher and published by Elsevier. This book was released on 2013-11-25 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This information-packed volume covers all aspects of natural gas measurement.
Download or read book Springer Handbook of Experimental Fluid Mechanics written by Cameron Tropea and published by Springer Science & Business Media. This book was released on 2007-10-09 with total page 1570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying DVD-ROM contains ... "all chapters of the Springer Handbook."--Page 3 of cover.
Download or read book Methods for Measuring Greenhouse Gas Balances and Evaluating Mitigation Options in Smallholder Agriculture written by Todd S. Rosenstock and published by Springer. This book was released on 2016-08-23 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides standards and guidelines for quantifying greenhouse gas emissions and removals in smallholder agricultural systems and comparing options for climate change mitigation based on emission reductions and livelihood trade-offs. Globally, agriculture is directly responsible for about 11% of annual greenhouse gas (GHG) emissions and induces an additional 17% through land use change, mostly in developing countries. Farms in the developing countries of sub-Saharan Africa and Asia are predominately managed by smallholders, with 80% of land holdings smaller than ten hectares. However, little to no information exists on greenhouse gas emissions and mitigation potentials in smallholder agriculture. Greenhouse gas measurements in agriculture are expensive, time consuming, and error prone, challenges only exacerbated by the heterogeneity of smallholder systems and landscapes. Concerns over methodological rigor, measurement costs, and the diversity of approaches, coupled with the demand for robust information suggest it is germane for the scientific community to establish standards of measurements for quantifying GHG emissions from smallholder agriculture. Standard guidelines for use by scientists, development organizations will help generate reliable data on emissions baselines and allow rigorous comparisons of mitigation options. The guidelines described in this book, developed by the CGIAR Research Program on Climate Change, Agriculture, and Food Security (CCAFS) and partners, are intended to inform anyone conducting field measurements of agricultural greenhouse gas sources and sinks, especially to develop IPCC Tier 2 emission factors or to compare mitigation options in smallholder systems.
Download or read book The Safety Relief Valve Handbook written by Marc Hellemans and published by Elsevier. This book was released on 2009-08-31 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Safety Valve Handbook is a professional reference for design, process, instrumentation, plant and maintenance engineers who work with fluid flow and transportation systems in the process industries, which covers the chemical, oil and gas, water, paper and pulp, food and bio products and energy sectors. It meets the need of engineers who have responsibilities for specifying, installing, inspecting or maintaining safety valves and flow control systems. It will also be an important reference for process safety and loss prevention engineers, environmental engineers, and plant and process designers who need to understand the operation of safety valves in a wider equipment or plant design context. - No other publication is dedicated to safety valves or to the extensive codes and standards that govern their installation and use. A single source means users save time in searching for specific information about safety valves - The Safety Valve Handbook contains all of the vital technical and standards information relating to safety valves used in the process industry for positive pressure applications. - Explains technical issues of safety valve operation in detail, including identification of benefits and pitfalls of current valve technologies - Enables informed and creative decision making in the selection and use of safety valves - The Handbook is unique in addressing both US and European codes:- covers all devices subject to the ASME VIII and European PED (pressure equipment directive) codes;- covers the safety valve recommendations of the API (American Petroleum Institute);- covers the safety valve recommendations of the European Normalisation Committees;- covers the latest NACE and ATEX codes;- enables readers to interpret and understand codes in practice - Extensive and detailed illustrations and graphics provide clear guidance and explanation of technical material, in order to help users of a wide range of experience and background (as those in this field tend to have) to understand these devices and their applications - Covers calculating valves for two-phase flow according to the new Omega 9 method and highlights the safety difference between this and the traditional method - Covers selection and new testing method for cryogenic applications (LNG) for which there are currently no codes available and which is a booming industry worldwide - Provides full explanation of the principles of different valve types available on the market, providing a selection guide for safety of the process and economic cost - Extensive glossary and terminology to aid readers' ability to understand documentation, literature, maintenance and operating manuals - Accompanying website provides an online valve selection and codes guide.
Download or read book Veterinary Anaesthesia E Book written by Kathy W. Clarke and published by Elsevier Health Sciences. This book was released on 2013-06-28 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a fully revised new edition of this essential text covering anaesthesia and analgesia in all large and small animal species. The new edition has greatly expanded sections on anaesthesia of exotic species such as small mammals, llamas, camels and many more, and also has a new section on anaesthesia of wild animals, both large and small, and birds. The book is divided into 3 sections; the first, Principles and Procedures covers pharmacology and pharmacokinetics, monitoring, sedation and premedication and much more. The second section comprises chapters on anaesthesia in all the main species and the third section covers anaesthesia in special cases, complications and crises ! Almost 200 prints and line illustrations enhance the comprehensive text, and make the new edition of Veterinary Anaesthesia 10/e an essential purchase for all vets ! - all large and small animal species covered in one book: includes new advances in anaesthesia in horses, birds, lab animals and wild animals - glossary of USA and UK drug names: up-dated coverage of all new anaesthetic agents in Europe and the USA - first section covers principles of drug action, pharmacokinetics and pharmacodynamics - the only book to discuss anaesthesia of individual species in detail: lot of info on anaesthesia of goats, sheep and other herbivores such as camels and llamas - also covers analgesia in all species - chapter on special cases such as anaesthesia in obstetrics - chapter on anaesthetic accidents and crises ! - Presents a range of new chapters from contributors of international repute. - The evidence base has been expanded and, wherever possible, information is supported by a review of the literature. - Now in colour throughout, the all-new design includes check-list boxes to facilitate understanding/troubleshooting and increase safety. - New illustrations have been added in many chapters to clarify practical points of technique.
Download or read book Rhythms of the Brain written by G. Buzsáki and published by Oxford University Press. This book was released on 2011 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies of mechanisms in the brain that allow complicated things to happen in a coordinated fashion have produced some of the most spectacular discoveries in neuroscience. This book provides eloquent support for the idea that spontaneous neuron activity, far from being mere noise, is actually the source of our cognitive abilities. It takes a fresh look at the coevolution of structure and function in the mammalian brain, illustrating how self-emerged oscillatory timing is the brain's fundamental organizer of neuronal information. The small-world-like connectivity of the cerebral cortex allows for global computation on multiple spatial and temporal scales. The perpetual interactions among the multiple network oscillators keep cortical systems in a highly sensitive "metastable" state and provide energy-efficient synchronizing mechanisms via weak links. In a sequence of "cycles," György Buzsáki guides the reader from the physics of oscillations through neuronal assembly organization to complex cognitive processing and memory storage. His clear, fluid writing-accessible to any reader with some scientific knowledge-is supplemented by extensive footnotes and references that make it just as gratifying and instructive a read for the specialist. The coherent view of a single author who has been at the forefront of research in this exciting field, this volume is essential reading for anyone interested in our rapidly evolving understanding of the brain.
Download or read book A Plain English Guide to the EPA Part 503 Biosolids Rule written by and published by . This book was released on 1994 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Liquid Atomization written by L.P. Bayvel and published by Routledge. This book was released on 2019-01-22 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering the basics of liquid atomization, this book familiarizes readers with the physical processes of liquid atomization, the main types of atomizers and their design, measurements of spray characteristics, experimental investigations of atomizers, and application of atomizers. It demonstrates how to calculate and design atomizers and how to mea
Download or read book Introduction to Glass Science and Technology written by James E Shelby and published by Royal Society of Chemistry. This book was released on 2015-11-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise and inexpensive introduction for an undergraduate course in glass science and technology. The level of the book has deliberately been maintained at the introductory level to avoid confusion of the student by inclusion of more advanced material, and is unique in that its text is limited to the amount suitable for a one term course for students in materials science, ceramics or inorganic chemistry. The contents cover the fundamental topics of importance in glass science and technology, including glass formation, crystallization, phase separation and structure of glasses. Additional chapters discuss the most important properties of glasses, including discussion of physical, optical, electrical, chemical and mechanical properties. A final chapter provides an introduction to a number of methods used to form technical glasses, including glass sheet, bottles, insulation fibre, optical fibres and other common commercial products. In addition, the book contains discussion of the effects of phase separation and crystallization on the properties of glasses, which is neglected in other texts. Although intended primarily as a textbook, Introduction to Glass Science and Technology will also be invaluable to the engineer or scientist who desires more knowledge regarding the formation, properties and production of glass.
