Download or read book The New Automotive 42V PowerNet written by Alfons Graf and published by expert verlag. This book was released on 2001 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 42 V PowerNets written by Henning Wallentowitz and published by Springer Science & Business Media. This book was released on 2011-06-27 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: The efficiency of today's automobile PowerNets is limited and widely exhausted and the introduction of new systems is becoming more and more difficult. An offered remedy is the introduction of a new voltage level of 42 V. Within the scope of the EUROMOTOR symposium, associated problems were discussed and special methods for the solution were presented. The book describes current as well as futuristic fusing and protection concepts of vehicle PowerNets. It presents the introduction of a new 42 V-PowerNet into automobiles, the description of components and fusing systems for wires and electrical loads, the treatment of problems such as short-circuits and arcs, as well as seizing preventive measures. By focusing on the substantial aspects, the book addresses developers such as practitioners, who are active with automobile suppliers and vehicle manufacturers. Companies occupied with fusing devices, semiconductors, trunk circuits and electrical and/or electronic consumers will find this book especially interesting.
Download or read book Optimization of the Power Train in Vehicles by Using the Integrated Starter Generator ISG written by Heinz Schäfer and published by expert verlag. This book was released on 2002 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hybrid Vehicle and Energy Storage Technologies written by Society of Automotive Engineers and published by . This book was released on 2003 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IEEE Africon written by and published by . This book was released on 2002 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vehicular Electric Power Systems written by Ali Emadi and published by CRC Press. This book was released on 2003-12-12 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vehicular Electric Power Systems: Land, Sea, Air, and Space Vehicles acquaints professionals with trends and challenges in the development of more electric vehicles (MEVs) using detailed examples and comprehensive discussions of advanced MEV power system architectures, characteristics, and dynamics. The authors focus on real-world applications and highlight issues related to system stability as well as challenges faced during and after implementation. Probes innovations in the development of more electric vehicles for improved maintenance, support, endurance, safety, and cost-efficiency in automotive, aerospace, and marine vehicle engineering Heralding a new wave of advances in power system technology, Vehicular Electric Power Systems discusses: Different automotive power systems including conventional automobiles, more electric cars, heavy-duty vehicles, and electric and hybrid electric vehicles Electric and hybrid electric propulsion systems and control strategies Aerospace power systems including conventional and advanced aircraft, spacecraft, and the international space station Sea and undersea vehicles The modeling, real-time state estimation, and stability assessment of vehicular power systems Applications of fuel cells in various land, sea, air, and space vehicles Modeling techniques for energy storage devices including batteries, fuel cells, photovoltaic cells, and ultracapacitors Advanced power electronic converters and electric motor drives for vehicular applications Guidelines for the proper design of DC and AC distribution architectures
Download or read book Alternative Energy in Power Electronics written by Muhammad H. Rashid and published by Butterworth-Heinemann. This book was released on 2014-10-28 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new resource is a practical overview of designing, testing and troubleshooting power electronics in alternative energy systems, providing you with the most important information on how power electronics components such as inverters, controllers and batteries can play a pivotal role in the successful implementation of green energy solutions for both stand-alone and grid-connected applications. You will learn how to choose the right components for diverse systems, from utility-scale wind farms to photovoltaic panels on single residences, how to get the most out of existing systems, and how to solve the tough challenges particular to alternative energy applications. Whether you are a renewables professional who needs to understand more about how power electronics impact energy output, or a power engineer who is interested in learning what new avenues the alternative energy revolution is opening for your work, start here with advice and explanations from the experts, including equations, diagrams and tables designed to help you understand and succeed. - Provides a thorough overview of the key technologies, methods and challenges for implementing power electronics in alternative energy systems for optimal power generation - Includes hard-to-find information on how to apply converters, inverters, batteries, controllers and more for stand-alone and grid-connected systems - Covers wind and solar applications, as well as ocean and geothermal energy, hybrid systems and fuel cells
Download or read book Computational Intelligence in Automotive Applications written by Danil Prokhorov and published by Springer Science & Business Media. This book was released on 2008 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume is the first of its kind and provides a representative sample of contemporary computational intelligence (CI) activities in the area of automotive technology. All chapters contain overviews of the state-of-the-art.
Download or read book Vehicle Technology written by Dieter Schramm and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-11-18 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: The motor vehicle technology covered in this book has become in the more than 125 years of its history in many aspects an extremely complex and, in many areas of engineering science . Motor vehicles must remain functional under harsh environmental conditions and extreme continuous loads and must also be reliably brought into a safe state even in the event of a failure by a few trained operators. The automobile is at the same time a mass product, which must be produced in millions of pieces and at extremely low cost. In addition to the fundamentals of current vehicle systems, the book also provides an overview of future developments such as, for example, in the areas of electromobility, alternative drives and driver assistance systems. The basis for the book is a series of lectures on automotive engineering, which has been offered by the first-named author at the University of Duisburg-Essen for many years. Starting from classical systems in the automobile, the reader is given a systemic view of modern motor vehicles. In addition to the pure basic function, the modeling of individual (sub-) systems is also discussed. This gives the reader a deep understanding of the underlying principles. In addition, the book with the given models provides a basis for the practical application in the area of simulation technology and thus achieves a clear added value against books, which merely explain the function of a system without entering into the modeling. On the basis of today's vehicle systems we will continue to look at current and future systems. In addition to the state-of-the-art, the reader is thus taught which topics are currently dominant in research and which developments can be expected for the future. In particular, a large number of practical examples are provided directly from the vehicle industry. Especially for students of vehicle-oriented study courses and lectures, the book thus enables an optimal preparation for possible future fields of activity.
Download or read book Frontiers of Manufacturing Science and Measuring Technology III written by Wen Pei Sung and published by Trans Tech Publications Ltd. This book was released on 2013-09-03 with total page 2430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2013 3rd International Conference on Frontiers of Manufacturing Science and Measuring Technology (ICFMM 2013), July 30-31, 2013, LiJiang, China
Download or read book In vehicle Networks and Software written by and published by . This book was released on 2005 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Propulsion Systems for Hybrid Vehicles written by John M. Miller and published by IET. This book was released on 2008 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering in-depth coverage of hybrid propulsion topics, energy storage systems and modelling, and supporting electrical systems, this book will be an invaluable resource for practising engineers and managers involved in all aspects of hybrid vehicle development, modelling, simulation and testing.
Download or read book Encyclopedia of Electrochemical Power Sources written by and published by Elsevier. This book was released on 2024-09-16 with total page 5674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Electrochemical Power Sources, Second Edition, is a comprehensive seven-volume set that serves as a vital interdisciplinary reference for those working with batteries, fuel cells, electrolyzers, supercapacitors, and photo-electrochemical cells. With an increased focus on the environmental and economic impacts of electrochemical power sources, this work not only consolidates extensive coverage of the field but also serves as a gateway to the latest literature for professionals and students alike. The field of electrochemical power sources has experienced significant growth and development since the first edition was published in 2009. This is reflected in the exponential growth of the battery market, the improvement of many conventional systems, and the introduction of new systems and technologies. This completely revised second edition captures these advancements, providing updates on all scientific, technical, and economic developments over the past decade. Thematically arranged, this edition delves into crucial areas such as batteries, fuel cells, electrolyzers, supercapacitors, and photo-electrochemical cells. It explores challenges and advancements in electrode and electrolyte materials, structural design, optimization, application of novel materials, and performance analysis. This comprehensive resource, with its focus on the future of electrochemical power sources, is an essential tool for navigating this rapidly evolving field. - Covers the main types of power sources, including their operating principles, systems, materials, and applications - Serves as a primary source of information for electrochemists, materials scientists, energy technologists, and engineers - Incorporates 365 articles, with timely coverage of environmental and sustainability aspects - Arranged thematically to facilitate easy navigation of topics and easy exploration of the field across its key branches - Follows a consistent structure and features elements such as key objective boxes, summaries, figures, references, and cross-references etc., to help students, faculty, and professionals alike
Download or read book Power Electronics in Transportation written by and published by . This book was released on 2004 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electric Vehicle Integration in a Smart Microgrid Environment written by Mohammad Saad Alam and published by CRC Press. This book was released on 2021-08-19 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Vehicle Integration in a Smart Microgrid Environment The growing demand for energy in today’s world, especially in the Middle East and Southeast Asia, has been met with massive exploitation of fossil fuels, resulting in an increase in environmental pollutants. In order to mitigate the issues arising from conventional internal combustion engine-powered vehicles, there has been a considerable acceleration in the adoption of electric vehicles (EVs). Research has shown that the impact of fossil fuel use in transportation and surging demand in power owing to the growing EV charging infrastructure can potentially be minimalized by smart microgrids. As EVs find wider acceptance with major advancements in high efficiency drivetrain and vehicle design, it has become clear that there is a need for a system-level understanding of energy storage and management in a microgrid environment. Practical issues, such as fleet management, coordinated operation, repurposing of batteries, and environmental impact of recycling and disposal, need to be carefully studied in the context of an ageing grid infrastructure. This book explores such a perspective with contributions from leading experts on planning, analysis, optimization, and management of electrified transportation and the transportation infrastructure. The primary purpose of this book is to capture state-of-the-art development in smart microgrid management with EV integration and their applications. It also aims to identify potential research directions and technologies that will facilitate insight generation in various domains, from smart homes to smart cities, and within industry, business, and consumer applications. We expect the book to serve as a reference for a larger audience, including power system architects, practitioners, developers, new researchers, and graduate-level students, especially for emerging clean energy and transportation electrification sectors in the Middle East and Southeast Asia.
Download or read book Conference Record Industry Applications Society IEEE IAS Annual Meeting written by IEEE Industry Applications Society. Annual Meeting and published by . This book was released on 2001 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductors written by Werner Klingenstein and published by Publicis. This book was released on 2004-05-31 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive insight into today's standard technologies, this book covers the vast range of semiconductor products and their possible applications. The material ranges from the basics of conventional semiconductor technology through standard, power and opto semiconductors, to highly complex memories and microcontrollers and the special devices and modules for smartcards, automotive electronics, consumer electronics and telecommunications. Several chapters are devoted to the production of semiconductor components and their use in electronic systems, as well as to quality management. The book offers both students and users a unique overview of technology, architecture and areas of application of semiconductor products. The enclosed CD-ROM includes data on a multitude of products.
