Download or read book The Modelling and Control of a 1 octene Dividing Wall Distillation Column written by Muhammad Abdul Kader and published by . This book was released on 2009 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Controlling Trace Impurities in a Dividing Wall Distillation Column written by Melissa Mary Donahue and published by . This book was released on 2018 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dividing wall distillation columns (DWCs) separate a feed mixture into three pure product streams using one column shell. Though attractive due to capital and operational savings, DWCs have yet to gain widespread industrial acceptance. One notable concern is controllability. The research within this document examines a four component feed mixture to evaluate the operational flexibility of a fixed-design DWC through experimental and simulation-based studies. A pilot DWC was successfully controlled at multiple operating points, and a dynamic model was developed to reflect the pilot dividing wall column. As a form of process intensification, DWCs have a higher risk for controller interaction making conventional PID control potentially inadequate. This work successfully used two PID temperature controllers to maintain the column at steady state, transition the column between steady states, and reject feed disturbances without controller interaction. These controller pairings were determined using conventional controller design techniques. Therefore, for this chemical system and column design, traditional approaches to distillation control are sufficient to handle the intensified nature of DWCs. Because more components are present in DWCs in larger amounts, there is concern that temperature control will no longer imply composition control. Temperature control proved successful in this study. Controlling two temperatures maintained column operation against feed disturbances. In addition, prefractionator temperature correlated well with reboiler duty for multiple feed qualities therefore serving as a promising control variable though more disturbances such as feed composition should be examined. The minimum energy controller was not tested experimentally. A steady state model with heat transfer matching the pilot data was scaled to the size of an industrial tower and used to generate a minimum energy response surface for different vapor and liquid split values. In summary, this research investigated the operational flexibility of a fixed-design DWC using a four component mixture, tested the ability of conventional distillation control design techniques to determine control structures for a DWC, and created a minimum energy operating surface that could be used to examine control structures. A technique to determine the overall heat transfer coefficients was developed, and the model closely matched experimental steady state data

Download or read book Advanced Distillation Technologies written by Anton A. Kiss and published by John Wiley & Sons. This book was released on 2013-02-26 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distillation has historically been the main method for separating mixtures in the chemical process industry. However, despite the flexibility and widespread use of distillation processes, they still remain extremely energy inefficient. Increased optimization and novel distillation concepts can deliver substantial benefits, not just in terms of significantly lower energy use, but also in reducing capital investment and improving eco-efficiency. While likely to remain the separation technology of choice for the next few decades, there is no doubt that distillation technologies need to make radical changes in order to meet the demands of the energy-conscious society. Advanced Distillation Technologies: Design, Control and Applications gives a deep and broad insight into integrated separations using non-conventional arrangements, including both current and upcoming process intensification technologies. It includes: Key concepts in distillation technology Principles of design, control, sizing and economics of distillation Dividing-wall column (DWC) – design, configurations, optimal operation and energy efficient and advanced control DWC applications in ternary separations, azeotropic, extractive and reactive distillation Heat integrated distillation column (HIDiC) – design, equipment and configurations Heat-pump assisted applications (MVR, TVR, AHP, CHRP, TAHP and others) Cyclic distillation technology – concepts, modeling approach, design and control issues Reactive distillation – fundamentals, equipment, applications, feasibility scheme Results of rigorous simulations in Mathworks Matlab & Simulink, Aspen Plus, Dynamics and Custom Modeler Containing abundant examples and industrial case studies, this is a unique resource that tackles the most advanced distillation technologies – all the way from the conceptual design to practical implementation. The author of Advanced Distillation Technologies, Dr. Ir. Anton A. Kiss, has been awarded the Hoogewerff Jongerenprijs 2013. Find out more (website in Dutch)...

Download or read book A Design Model for Dividing Wall Distillation Columns written by Bailee Jeanee Roach and published by . This book was released on 2017 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, the production of three high purity products from a three component mixture requires the use of two distillation columns. A Dividing Wall Column (DWC) offers an alternative to this approach. The DWC contains a vertical partition, dividing the column into two sides. The feed side separates the lowest and highest boiling products, while the product side separates the intermediate component. This configuration reduces capital costs by utilizing only one column, reboiler, and condenser and reduces the thermodynamic losses by partitioning the feed and side product. Previous theoretical studies have found that a DWC can also produce as high as 30-50 percent energy savings over a traditional multi-column scheme. Despite these advantages, validated predictive models, which will facilitate widespread adoption of the technology, are lacking. In this research, experimental results were obtained over a wide range of operating conditions using a constructed six inch diameter pilot plant data is used to develop a fully validated DWC. The pilot DWC ran several experimental tests with both an alcohol and hydrocarbon feed. Both systems were tested with an equimolar and a 10/80/10 feed composition. Internal flow rate and composition data were available that has not been published in research, allowing for a complete model validation, including heat loss and heat transfer across the dividing wall. Both Model Predictive Control and traditional PID control was tested and resulted in high quality steady state data obtained. An extensive hydraulic study was conducted for both structured and random packing. Mass transfer studies and air-water experiments were conducted to fundamentally characterize the column hydraulics. These studies included confirming the vapor split is determined by the wall location and not impacted by the pressure drop. Pressure drop and wetted area studies were performed on circular and dividing wall column structures. The dry pressure drop, irrigated pressure drop, and hold-up were compared with existing correlations. Additionally, the dividing wall wetted area was determined. A DWC model was validated with the experimental pilot data obtained as well as comparing with open literature data. With the results from the validated model, optimizations were conducted to aid in DWC design. It was shown that feed temperature is an important variable to consider in design. The vapor split did not have as much of an impact on energy savings as the liquid split. An accurate energy calculation was performed on a pilot scale column and a scale-up to industrial column diameters. The scale-up shows that the impacts from heat loss and heat transfer are not as significant in a large scale column for product purities and column liquid and vapor loads. DWC columns averaged approximately 30% energy savings. The comprehensive validated model lays the groundwork for DWC industrial expansion.

Download or read book Design and Control of a Dividing Wall Distillation Column for the Fractionation Section in the Pacol Enhancement Process PEP written by Michael Schultz and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Distillation Design and Control Using Aspen Simulation written by William L. Luyben and published by . This book was released on 2013 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Distillation Equipment and Processes written by Andrzej Gorak and published by Academic Press. This book was released on 2014-06-24 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distillation: Equipment and Processes—winner of the 2015 PROSE Award in Chemistry & Physics from the Association of American Publishers—is a single source of authoritative information on all aspects of the theory and practice of modern distillation, suitable for advanced students and professionals working in a laboratory, industrial plants, or a managerial capacity. It addresses the most important and current research on industrial distillation, including all steps in process design (feasibility study, modeling, and experimental validation), together with operation and control aspects. This volume features an extra focus on distillation equipment and processes. - Winner of the 2015 PROSE Award in Chemistry & Physics from the Association of American Publishers - Practical information on the newest development written by recognized experts - Coverage of a huge range of laboratory and industrial distillation approaches - Extensive references for each chapter facilitates further study

Download or read book Handbook of Industrial Chemistry and Biotechnology written by James A. Kent and published by Springer Science & Business Media. This book was released on 2013-01-13 with total page 1560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Substantially revising and updating the classic reference in the field, this handbook offers a valuable overview and myriad details on current chemical processes, products, and practices. No other source offers as much data on the chemistry, engineering, economics, and infrastructure of the industry. The Handbook serves a spectrum of individuals, from those who are directly involved in the chemical industry to others in related industries and activities. It provides not only the underlying science and technology for important industry sectors, but also broad coverage of critical supporting topics. Industrial processes and products can be much enhanced through observing the tenets and applying the methodologies found in chapters on Green Engineering and Chemistry (specifically, biomass conversion), Practical Catalysis, and Environmental Measurements; as well as expanded treatment of Safety, chemistry plant security, and Emergency Preparedness. Understanding these factors allows them to be part of the total process and helps achieve optimum results in, for example, process development, review, and modification. Important topics in the energy field, namely nuclear, coal, natural gas, and petroleum, are covered in individual chapters. Other new chapters include energy conversion, energy storage, emerging nanoscience and technology. Updated sections include more material on biomass conversion, as well as three chapters covering biotechnology topics, namely, Industrial Biotechnology, Industrial Enzymes, and Industrial Production of Therapeutic Proteins.

Download or read book A TEXTBOOK OF CHEMICAL ENGINEERING THERMODYNAMICS written by K. V. NARAYANAN and published by PHI Learning Pvt. Ltd.. This book was released on 2013-01-11 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as an undergraduate-level textbook in Chemical Engineering, this student-friendly, thoroughly class-room tested book, now in its second edition, continues to provide an in-depth analysis of chemical engineering thermodynamics. The book has been so organized that it gives comprehensive coverage of basic concepts and applications of the laws of thermodynamics in the initial chapters, while the later chapters focus at length on important areas of study falling under the realm of chemical thermodynamics. The reader is thus introduced to a thorough analysis of the fundamental laws of thermodynamics as well as their applications to practical situations. This is followed by a detailed discussion on relationships among thermodynamic properties and an exhaustive treatment on the thermodynamic properties of solutions. The role of phase equilibrium thermodynamics in design, analysis, and operation of chemical separation methods is also deftly dealt with. Finally, the chemical reaction equilibria are skillfully explained. Besides numerous illustrations, the book contains over 200 worked examples, over 400 exercise problems (all with answers) and several objective-type questions, which enable students to gain an in-depth understanding of the concepts and theory discussed. The book will also be a useful text for students pursuing courses in chemical engineering-related branches such as polymer engineering, petroleum engineering, and safety and environmental engineering. New to This Edition • More Example Problems and Exercise Questions in each chapter • Updated section on Vapour–Liquid Equilibrium in Chapter 8 to highlight the significance of equations of state approach • GATE Questions up to 2012 with answers

Download or read book Catalyst Separation Recovery and Recycling written by David J. Cole-Hamilton and published by Springer Science & Business Media. This book was released on 2006-01-13 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book looks at new ways of tackling the problem of separating reaction products from homogeneous catalytic solutions. The new processes involve low leaching supported catalysts, soluble supports such as polymers and dendrimers and unusual solvents such as water, fluorinated organics, ionic liquids and supercritical fluids. The advantages of the different possibilities are discussed alongside suggestions for further research that will be required for commercialisation. Unlike other books, in addition to the chemistry involved, the book looks at the process design that would be required to bring the new approaches to fruition. Comparisons are given with existing processes that have already been successfully applied and examples are given where these approaches are not suitable. The book includes: - New processes for the separation of products from solutions containing homogeneous catalysts - Catalysts on insoluble or soluble supports – fixed bed catalysts - continuous flow or ultrafiltration - Biphasic systems: water - organic, fluorous - organic, ionic liquid – organic, supercritical fluids (monophasic or biphasic with water, organic or ionic liquid) - Comparisons with current processes involving atmospheric or low temperature distillation - Consideration of Chemistry and Process Design - Advantages and disadvantages of each process exposed - Consideration of what else is need for commercialisation

Download or read book CJChE written by and published by . This book was released on 1999-08 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Essential Oils written by K. Husnu Can Baser and published by CRC Press. This book was released on 2009-12-28 with total page 994 pages. Available in PDF, EPUB and Kindle. Book excerpt: Egyptian hieroglyphs, Chinese scrolls, and Ayurvedic literature record physicians administering aromatic oils to their patients. Today society looks to science to document health choices and the oils do not disappoint. The growing body of evidence of their efficacy for more than just scenting a room underscores the need for production standards, quality control parameters for raw materials and finished products, and well-defined Good Manufacturing Practices. Edited by two renowned experts, the Handbook of Essential Oils covers all aspects of essential oils from chemistry, pharmacology, and biological activity, to production and trade, to uses and regulation. Bringing together significant research and market profiles, this comprehensive handbook provides a much-needed compilation of information related to the development, use, and marketing of essential oils, including their chemistry and biochemistry. A select group of authoritative experts explores the historical, biological, regulatory, and microbial aspects. This reference also covers sources, production, analysis, storage, and transport of oils as well as aromatherapy, pharmacology, toxicology, and metabolism. It includes discussions of biological activity testing, results of antimicrobial and antioxidant tests, and penetration-enhancing activities useful in drug delivery. New information on essential oils may lead to an increased understanding of their multidimensional uses and better, more ecologically friendly production methods. Reflecting the immense developments in scientific knowledge available on essential oils, this book brings multidisciplinary coverage of essential oils into one all-inclusive resource.

Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques

Download or read book Adsorption and Phase Behaviour in Nanochannels and Nanotubes written by Lawrence J. Dunne and published by Springer Science & Business Media. This book was released on 2009-09-24 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Channels of nanotubular dimensions exist in a variety of materials (examples are carbon nanotubes and the nanotubular channels of zeolites and zeotypes) and show promise for numerous applications due to their unique properties. One of their most important properties is their capacity to adsorb molecules and these may exist in a variety of phases. "Adsorption and Phase Behaviour in Nanochannels and Nanotubes" provides an excellent review of recent and current work on adsorption on nanometerials. It is an impressive collection of papers dealing with the adsorption and phase behaviour in nanoporous materials from both experimental and theoretical perspectives. "Adsorption and Phase Behaviour in Nanochannels and Nanotubes" focuses on carbon nanotubes as well as zeolites and related materials.

Download or read book Fluidized Bed Reactors Processes and Operating Conditions written by John G. Yates and published by Springer. This book was released on 2016-09-27 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fluidized-bed reactor is the centerpiece of industrial fluidization processes. This book focuses on the design and operation of fluidized beds in many different industrial processes, emphasizing the rationale for choosing fluidized beds for each particular process. The book starts with a brief history of fluidization from its inception in the 1940’s. The authors present both the fluid dynamics of gas-solid fluidized beds and the extensive experimental studies of operating systems and they set them in the context of operating processes that use fluid-bed reactors. Chemical engineering students and postdocs as well as practicing engineers will find great interest in this book.

Download or read book Modeling Simulation and Optimization written by Pandian Vasant and published by Springer. This book was released on 2017-12-07 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features selected contributions in the areas of modeling, simulation, and optimization. The contributors discusses requirements in problem solving for modeling, simulation, and optimization. Modeling, simulation, and optimization have increased in demand in exponential ways and how potential solutions might be reached. They describe how new technologies in computing and engineering have reduced the dimension of data coverage worldwide, and how recent inventions in information and communication technology (ICT) have inched towards reducing the gaps and coverage of domains globally. The chapters cover how the digging of information in a large data and soft-computing techniques have contributed to a strength in prediction and analysis, for decision making in computer science, technology, management, social computing, green computing, and telecom. The book provides an insightful reference to the researchers in the fields of engineering and computer science. Researchers, academics, and professionals will benefit from this volume. Features selected expanded papers in modeling, simulation, and optimization from COMPSE 2016; Includes research into soft computing and its application in engineering and technology; Presents contributions from global experts in academia and industry in modeling, simulation, and optimization.

Download or read book Handbook of Chemical Engineering Calculations written by Nicholas P. Chopey and published by McGraw-Hill Professional Publishing. This book was released on 1994 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compilation of the calculation procedures needed every day on the job by chemical engineers. Tables of Contents: Physical and Chemical Properties; Stoichiometry; Phase Equilibrium; Chemical-Reaction Equilibrium; Reaction Kinetics and Reactor Design; Flow of Fluids and Solids; Heat Transfer; Distillation; Extraction and Leaching; Crystallization; Filtration; Liquid Agitation; Size Reduction; Drying: Evaporation; Environmental Engineering in the Plant. Illustrations. Index.