Download or read book Introduction to Industrial Minerals written by D.A.C. Manning and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Industrial Minerals introduces the reader to the subject of the new mineral raw materials that our society demands. It emphasizes the way in which, in order to satisfy the consumer, the requirements of industry control mineral exploitation, and the way fundamental mineral properties are exploited for particular applications. It describes aggregates, industrial clays and raw materials for the chemical industry. The need for high temperature processing is addressed with a chapter on interpretation and use of mineralogical phase diagrams and time-temperature-transformation diagrams. These are then applied in separate chapters on the manufacture of glass, cement, brick clays and refractories. Evaluation of geological reserves is described in the context of computer modelling of deposit quality, and the final chapter considers the use of a site after extraction, emphasizing the requirements for waste disposal.
Download or read book The Mineral Industry written by and published by . This book was released on 1897 with total page 1086 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Economics of the Mineral Industries written by William A. Vogely and published by . This book was released on 1976 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Efficiency in the Minerals Industry written by Kwame Awuah-Offei and published by Springer. This book was released on 2017-10-31 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a state-of-the-art analysis of energy efficiency as applied to mining processes. From ground fragmentation to mineral processing and extractive metallurgy, experts discuss the current state of knowledge and the nagging questions that call for further research. It offers an excellent resource for all mine managers and engineers who want to improve energy efficiency to boost both production efficiency and sustainability. It will also benefit graduate students and experienced researchers looking for a comprehensive review of the current state of knowledge concerning energy efficiency in the minerals industry.
Download or read book Sustainability in the Mineral and Energy Sectors written by Sheila Devasahayam and published by CRC Press. This book was released on 2016-09-15 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable practices within the mining and energy sectors are assuming greater significance due to uncertainty and change within the global economy and safety, security, and health concerns. This book examines sustainability issues facing the mining and energy sectors by addressing six major themes: Mining and Mineral Processing; Metallurgy and Recycling; Environment; Energy; Socioeconomic and Regulatory; and Sustainable Materials and Fleets. Emphasizing an integrated transdisciplinary approach, it deliberates on optimizing mining productivity and energy efficiency and discusses integrated waste management practices. It discusses risk management, cost cutting, and integration of sustainable practices for long-term business value. It gives a comprehensive outlook for sustainable mineral futures from academic and industry perspectives covering mine to mill optimization, waste, risk and water management, improved efficiencies in mining tools and equipment, and performance indicators for sustainable developments. It covers how innovation and research underpin management of natural resources including sustainable carbon management. •Focuses on mining and mineral processing, metallurgy and recycling, the environment, energy, socioeconomic and regulatory issues, and sustainable materials and fleets. •Describes metallurgy and recycling and uses economic, environmental and social parameter analyses to identify areas for improvement in iron, steel, aluminium, lead, zinc, copper, and gold production. •Discusses current research on mining, performance indicators for sustainable development, sustainability in mining equipment, risk and safety management, and renewable energy resources •Covers alternative and conventional energy sources for the mineral sector as well water treatment and remediation and energy sustainability in mining. •Provides an overview of sustainable carbon management. •Offers an interdisciplinary approach with international focus.
Download or read book The Mineral Industry Its Statistics Technology and Trade written by and published by . This book was released on 1900 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evolutionary and Revolutionary Technologies for Mining written by National Research Council and published by National Academies Press. This book was released on 2002-03-14 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Office of Industrial Technologies (OIT) of the U. S. Department of Energy commissioned the National Research Council (NRC) to undertake a study on required technologies for the Mining Industries of the Future Program to complement information provided to the program by the National Mining Association. Subsequently, the National Institute for Occupational Safety and Health also became a sponsor of this study, and the Statement of Task was expanded to include health and safety. The overall objectives of this study are: (a) to review available information on the U.S. mining industry; (b) to identify critical research and development needs related to the exploration, mining, and processing of coal, minerals, and metals; and (c) to examine the federal contribution to research and development in mining processes.
Download or read book International and Comparative Mineral Law and Policy written by Elizabeth Bastida and published by Kluwer Law International B.V.. This book was released on 2005-01-01 with total page 1158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a broad spectrum of issues shaping the current paradigm of minerals sector governance. The ultimate aim of the book is to understand trends and developments in mineral law and policy occurring at international, regional, cross-border and in some selected cases at national level and also to identify some of the challenges lying ahead. With these objectives in view, the book brings together a representative selection of the most knowledgeable authors on the subject. The contributions deal with a diverse range of issues tackled from interdisciplinary perspectives. Topics are divided into five main chapters: international and comparative aspects of mineral law; actors and policies in the minerals industry; investment prospects, financial and fiscal issues; sustainable development and regional outlooks. The book aspires to serve as a useful reference for scholars, practitioners, students and all those with an interest in current developments in the areas reviewed. Elizabeth Bastida is the Rio Tinto Research Fellow and the Director of the Mineral Law and Policy Programme at the Centre for Energy, Petroleum, Mineral Law and Policy at the University of Dundee (CEPMLP/Dundee). Thomas W?lde is the Professor of International Economic, Natural Resources and Energy Law and was (until 2001) the Executive Director of CEPMLP/Dundee. He currently runs TWA, his private consultancy firm, which provides advisory services in natural resources and energy law, regulatory reform, investment promotion, state enterprise/agency appraisal and restructuring, privatisation, contract assessment, negotiation and dispute management. Janeth Warden-Fern?ndez is a Research and Teaching Fellow, an advisor of the Mineral Law and Policy Programme and the Manager of the Distance Learning Programme at CEPMLP/Dundee.
Download or read book Critical Mineral Resources of the United States written by K. J. Schulz and published by Geological Survey. This book was released on 2017 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the importance and dependence of specific mineral commodities increase, so does concern about their supply. The United States is currently 100 percent reliant on foreign sources for 20 mineral commodities and imports the majority of its supply of more than 50 mineral commodities. Mineral commodities that have important uses and face potential supply disruption are critical to American economic and national security. However, a mineral commodity's importance and the nature of its supply chain can change with time; a mineral commodity that may not have been considered critical 25 years ago may be critical today, and one considered critical today may not be so in the future. The U.S. Geological Survey has produced this volume to describe a select group of mineral commodities currently critical to our economy and security. For each mineral commodity covered, the authors provide a comprehensive look at (1) the commodity's use; (2) the geology and global distribution of the mineral deposit types that account for the present and possible future supply of the commodity; (3) the current status of production, reserves, and resources in the United States and globally; and (4) environmental considerations related to the commodity's production from different types of mineral deposits. The volume describes U.S. critical mineral resources in a global context, for no country can be self-sufficient for all its mineral commodity needs, and the United States will always rely on global mineral commodity supply chains. This volume provides the scientific understanding of critical mineral resources required for informed decisionmaking by those responsible for ensuring that the United States has a secure and sustainable supply of mineral commodities.
Download or read book Advances in the Characterization of Industrial Minerals written by G.E. Christidis and published by The Mineralogical Society of Great Britain and Ireland. This book was released on 2011-08-31 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advancement of human civilization has been intimately associated with the exploitation of raw materials. In fact the distinction of the main historical eras is based on the type of raw materials used. Hence, passage from the Paleolithic and Neolithic Age to the Bronze Age is characterized by the introduction of basic metals mainly copper, zinc and tin in human activities; the Iron Age is marked by the use of iron as the predominant metal. The use of metals has increased and culminated with the industrial revolution in the mid-eighteenth century, which marked the onset of the industrial age in the western world. Since then the importance of metals has gradually been surpassed by industrial minerals in the industrialized countries. Industrial minerals are raw materials used by industry for their physical and/or chemical properties. Characterization of industrial minerals is important for their assessment and can be demanding and often complicated. This new volume, co-published by the European Mineralogical Union and the Mineralogical Society of Great Britain & Ireland, is based on papers presented at an EMU-Erasmus IP School which was held in the Technical University of Crete, Chania, Greece. The aim of the School was to describe advances in some of the analytical methods used to characterize industrial minerals and to propose additional methods which are currently not used for this purpose.
Download or read book Minerals Critical Minerals and the U S Economy written by National Research Council and published by National Academies Press. This book was released on 2008-03-11 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Minerals are part of virtually every product we use. Common examples include copper used in electrical wiring and titanium used to make airplane frames and paint pigments. The Information Age has ushered in a number of new mineral uses in a number of products including cell phones (e.g., tantalum) and liquid crystal displays (e.g., indium). For some minerals, such as the platinum group metals used to make cataytic converters in cars, there is no substitute. If the supply of any given mineral were to become restricted, consumers and sectors of the U.S. economy could be significantly affected. Risks to minerals supplies can include a sudden increase in demand or the possibility that natural ores can be exhausted or become too difficult to extract. Minerals are more vulnerable to supply restrictions if they come from a limited number of mines, mining companies, or nations. Baseline information on minerals is currently collected at the federal level, but no established methodology has existed to identify potentially critical minerals. This book develops such a methodology and suggests an enhanced federal initiative to collect and analyze the additional data needed to support this type of tool.
Download or read book The Mineral Industry of Utah written by Robert Strong Lewis and published by . This book was released on 1919 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ECONOMICS of the Mineral Industries written by and published by . This book was released on 1985 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Status of the Mineral Industries written by United States. Bureau of Mines and published by . This book was released on 1974 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Mineral Industries of Arizona written by Eldred Dewey Wilson and published by . This book was released on 1927 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Minerals Yearbook written by and published by . This book was released on 1993 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book General Review of the Mineral Industries written by Statistics Canada. Manufacturing and Primary Industries Division and published by . This book was released on 1995 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
