Download or read book Metallography and Microstructure in Ancient and Historic Metals written by David A. Scott and published by Getty Publications. This book was released on 1992-01-02 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: David A. Scott provides a detailed introduction to the structure and morphology of ancient and historic metallic materials. Much of the scientific research on this important topic has been inaccessible, scattered throughout the international literature, or unpublished; this volume, although not exhaustive in its coverage, fills an important need by assembling much of this information in a single source. Jointly published by the GCI and the J. Paul Getty Museum, the book deals with many practical matters relating to the mounting, preparation, etching, polishing, and microscopy of metallic samples and includes an account of the way in which phase diagrams can be used to assist in structural interpretation. The text is supplemented by an extensive number of microstructural studies carried out in the laboratory on ancient and historic metals. The student beginning the study of metallic materials and the conservation scientist who wishes to carry out structural studies of metallic objects of art will find this publication quite useful.
Download or read book Metallography of Steels Interpretation of Structure and the Effects of Processing written by Hubertus Colpaert and published by ASM International. This book was released on 2018-08-01 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated and translated by André Luiz V. da Costa e Silva This book is a combination of a metallographic atlas for steels and cast irons and an introductory textbook covering the fundamentals of phase transformations and heat treatment of these materials. Every important stage of processing, from casting to cold working is clearly discussed and copiously illustrated with metallographs that show the obtained structures, both desired and those achieved when deviations occur. First published in 1951 by Professor Hubertus Colpaert from the Institute for Technological Research (IPT) of São Paulo, Brazil, this book became one of the most important Brazilian references for professionals interested in the processing, treatment, and application of steels and cast irons. In the Fourth Edition and English translation, updated and translated by Professor André Luiz V. da Costa e Silva, the concept of the of the original edition was preserved while the important developments of recent decades, both in metallographic characterization and in steel and iron products, as well as progress in the understanding of the transformations that made the extraordinary developments of these alloys possible, were added. Most metallographs are of actual industrial materials and a large number originate from industry leaders or laboratories at the forefront of steel and iron development. As steel continues to be the most widely used metallic material in the world, Metallography of Steels continues to be an essential reference for students, metallographers, and engineers interested in understanding processing-properties-structure relationships of the material. The balance between theoretical and applied information makes this book a valuable companion for even experienced steel practitioners.
Download or read book Electron Microscopy of Interfaces in Metals and Alloys written by C.T Forwood and published by CRC Press. This book was released on 1991-01-01 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron Microscopy of Interfaces in Metals and Alloys examines the structure of interfaces in metals and alloys using transmission electron microscopy. The book presents quantitative methods of analysis and reviews the most significant work on interface structure over the last 20 years. It provides the first book description of the methods used for quantitative identification of Burgers vectors of interfacial dislocations, including the geometric analysis of periodicities in interface structure and the comparison of experimental and theoretical electron micrographs. The book explores low- and high-angle grain boundaries and interphase interfaces between neighboring grains, emphasizing interfacial dislocations and rigid-body displacements to the structure and properties of interfaces. It also analyzes the use of two-beam images and diffraction patterns for analysis and studies n-beam lattice imaging. The book includes numerous worked examples of the analysis of the structure of grain boundaries and interphase interfaces, which are particularly useful to those who need to consider the nature of intercrystalline interfaces.
Download or read book Metallographer s Guide written by B. L. Bramfitt and published by ASM International. This book was released on 2001-01-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a solid overview of the important metallurgical concepts related to the microstructures of irons and steels, and it provides detailed guidelines for the proper metallographic techniques used to reveal, capture, and understand microstructures. This book provides clearly written explanations of important concepts, and step-by-step instructions for equipment selection and use, microscopy techniques, specimen preparation, and etching. Dozens of concise and helpful “metallographic tips” are included in the chapters on laboratory practices and specimen preparation. The book features over 500 representative microstructures, with discussions of how the structures can be altered by heat treatment and other means. A handy index to these images is provided, so the book can also be used as an atlas of iron and steel microstructures.
Download or read book Microstructure of Metals and Alloys written by Ganka Zlateva and published by CRC Press. This book was released on 2008-05-05 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: A teaching tool intended to complement existing books on the theory of materials science, metallurgy, and electron microscopy, this text focuses on metals and alloys. It visualizes key structural elements common to crystalline materials, including crystal lattice imperfections, along with the principles and steps involved in the microstructure deve
Download or read book The Microscopic Analysis of Metals written by Floris Osmond and published by . This book was released on 1904 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Technologies Development and Application written by Isak Karabegović and published by Springer. This book was released on 2018-05-14 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers included in this book were presented at the International Conference “New Technologies, Development and Application,” which was held at the Academy of Sciences and Arts of Bosnia and Herzegovina in Sarajevo, Bosnia and Herzegovina on 28th–30th June 2018. The book covers a wide range of technologies and technical disciplines including complex systems such as: Robotics, Mechatronics Systems, Automation, Manufacturing, Cyber-Physical Systems, Autonomous Systems, Sensors, Networks, Control Systems, Energy Systems, Automotive Systems, Biological Systems, Vehicular Networking and Connected Vehicles, Effectiveness and Logistics Systems, Smart Grids, Nonlinear Systems, Power Systems, Social Systems, and Economic Systems.
Download or read book Light Microscopy of Carbon Steels written by Leonard Ernest Samuels and published by ASM International. This book was released on with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 1,200 representative micrographs and the information and explanatory text that makes them really useful, including composition, condition, etchant, magnification, and more than 100 graphs and tables, this 'how to' book not only gives everyday working examples, but also discusses the relationship between the constitution, metallurgy, and microstructure of various carbon steel products. Contents: Nomenclature of Phases and Constituents; Phase Transformations; Low-Carbon Irons and Steels; Annealing and Normalizing; Spheroidization and Graphitization; Austenitization; Transformation of Austenite; Tempering of Martensite; Welding; Surface Oxidation, Decarburation and Oxidation Scaling; Glossary of Terms; EtchingMethods; ConversionTables; Index.
Download or read book An Atlas of Polymer Damage written by Lothar Engel and published by Manson Publishing. This book was released on 1981 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microscopic Methods in Metals written by Ulrich Gonser and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods of scientific investigation can be divided into two categories: they are either macroscopic or microscopic in nature. The former are generally older, classical methods where the sample as a whole is studied and various local prop erties are deduced by differentiation. The microscopic methods, on the other hand, have been discovered and developed more recently, and they operate for the most part on an atomistic scale. Glancing through the shelves of books on the various scientific fields, and, in particular, on the field of physical metallurgy, we are surprised at how lit tle consideration has been given to the microscopic methods. How these tools provide new insight and information is a question which so far has not at tracted much attention. Similar observations can be made at scientific confer ences, where the presentation of papers involving microscopic methods is often pushed into a far corner. This has led users of such methods to organize their own special conferences. The aim of this book is to bridge the present gap and encourage more interaction between the various fields of study and selected microscopic meth ods, with special emphasis on their suitability for investigating metals. In each case the principles of the method are reviewed, the advantages and successes pointed out, but also the shortcomings and limitations indicated.
Download or read book Metallography Principles and Practice written by George F. Vander Voort and published by ASM International. This book was released on 1999-01-01 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work offers a comprehensive source of information on metallographic techniques and their application to the study of metals, ceramics, and polymers. It contains an extensive collection of micro- and macrographs.
Download or read book Metal Oxide Nanoparticles 2 Volume Set written by Oliver Diwald and published by John Wiley & Sons. This book was released on 2021-09-14 with total page 903 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Nanoparticles A complete nanoparticle resource for chemists and industry professionals Metal oxide nanoparticles are integral to a wide range of natural and technological processes—from mineral transformation to electronics. Additionally, the fields of engineering, electronics, energy technology, and electronics all utilize metal oxide nanoparticle powders. Metal Oxide Nanoparticles: Formation, Functional Properties, and Interfaces presents readers with the most relevant synthesis and formulation approaches for using metal oxide nanoparticles as functional materials. It covers common processing routes and the assessment of physical and chemical particle properties through comprehensive and complementary characterization methods. This book will serve as an introduction to nanoparticle formulation, their interface chemistry and functional properties at the nanoscale. It will also act as an in-depth resource, sharing detailed information on advanced approaches to the physical, chemical, surface, and interface characterization of metal oxide nanoparticle powders and dispersions. Addresses the application of metal oxide nanoparticles and its economic impact Examines particle synthesis, including the principles of selected bottom-up strategies Explores nanoparticle formulation—a selection of processing and application routes Discusses the significance of particle surfaces and interfaces on structure formation, stability and functional materials properties Covers metal oxide nanoparticle characterization at different length scales With this valuable resource, academic researchers, industrial chemists, and PhD students can all gain insight into the synthesis, properties, and applications of metal oxide nanoparticles.
Download or read book Microscopy written by Terence David Allen and published by Oxford University Press, USA. This book was released on 2015 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Using light, electrons, or X-rays, microscopes today form a vital tool not only in biology but in many other disciplines, including materials science and nanotechnology. In this Very Short Introduction Terence Allen describes the scientific principles behind the main forms of microscopy, and the exciting new developments in the field. Beginning with a brief history of microscopy, Allen surveys the diverse and powerful forms of microscopes available today, illustrating how microscopy impinges on almost every aspect of our daily lives."--Inside front cover.
Download or read book Microstructural Analysis written by J. McCall and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: During recent years, people involved in developing new metals and materials for use in some of the rather extreme conditions of stress, temperature, and environment have relied heavily on the microstructural condition of their materials. In fact, many of the newer materials, such as dispersion-strengthened alloys, have been designed almost entirely by first determining the microstruc ture desired and then finding the right combination of composition, heat treatment, and mechanical working that will result in the de sired microstructure. Furthermore, the extremely high reliability required of materials used today, for example, in aerospace and nuclear energy systems, requires close control on the microstruc tural conditions of materials. This is clearly evident from even a cursory examination of recently written specifications for mate rials where rather precise microstructural parameters are stipu lated. Whereas specifications written several years ago may have included microstructural requirements for details such as ASTM grain size or graphite type, today's specifications are beginning to include such things as volume fraction of phases, mean free path of particles, and grain intercept distances. Rather arbitrary terms such as "medium pearlite" have been replaced by requirements such as "interlamella spacing not to exceed 0. 1 micron. " Finally, materials users have become increasingly aware that when a material does fail, the reason for its failure may be found by examining and "reading" its microstructure. The responsibility for a particular microstructure and a resulting failure is a matter of growing importance in current product liability consider ations.
Download or read book The Ore Minerals Under the Microscope written by Bernhard Pracejus and published by Elsevier. This book was released on 2015-06-25 with total page 1119 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Ore Minerals Under the Microscope: An Optical Guide, Second Edition, is a very detailed color atlas for ore/opaque minerals (ore microscopy), with a main emphasis on name and synonyms, short descriptions, mineral groups, chemical compositions, information on major formation environments, optical data, reflection color/shade comparison with four common/standard minerals of a similar color or grey shade, and up to five high-quality photos for each mineral with scale. In addition, the atlas contains a compilation from some of the prominent publications in the field of ore microscopy presented on a list of 431 minerals. - Concise, full-color pictorial reference for scientists and geologists - Explains how to describe and identify microscopic samples of minerals - Draws material from prominent literature yielding more than 400 different minerals
Download or read book Materials Characterization written by Yang Leng and published by John Wiley & Sons. This book was released on 2009-03-04 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers state-of-the-art techniques commonly used in modern materials characterization. Two important aspects of characterization, materials structures and chemical analysis, are included. Widely used techniques, such as metallography (light microscopy), X-ray diffraction, transmission and scanning electron microscopy, are described. In addition, the book introduces advanced techniques, including scanning probe microscopy. The second half of the book accordingly presents techniques such as X-ray energy dispersive spectroscopy (commonly equipped in the scanning electron microscope), fluorescence X-ray spectroscopy, and popular surface analysis techniques (XPS and SIMS). Finally, vibrational spectroscopy (FTIR and Raman) and thermal analysis are also covered.
Download or read book Metallography in Archaeology and Art written by David A. Scott and published by Springer Nature. This book was released on 2019-08-30 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to the metallographic study of ancient metals. Metallography is important both conceptually as a microstructural science and in terms of its application to the study of ancient and historic metals. Metallography is a well-established methodology for the characterization of the microstructure of metals, which continues to be significant today in quality control and characterization of metallic properties. Not only does the metallographic examination of ancient metals present its own challenges in terms of sample size and interpretation of evidence, but it must be integrated with archaeological data and cultural research in order to obtain the most meaningful results. Issues of authentication and the establishment of fakes and forgeries of metallic artefacts often involve metallographic evidence of both metal and patina or corrosion interface, as an essential component of such a study. The present volume sets out the basic features of relevant metallic systems, enhanced with a series of examples of typical microstructural types, with illustrative case studies and examples throughout the text derived from studies undertaken by the two authors. This book provides a comprehensive presentation of metallography for archaeologists, archaeometallurgists, conservators, conservation scientists and metallurgists of modern materials.
