Download or read book The Mechanical Properties of the 18 Per Cent Nickel Maraging Steels written by J. E. Campbell and published by . This book was released on 1964 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the combination of tensile properties and toughness that can be obtained with the maraging steels is higher than can be achieved with other steels by simple heat treatments, there is considerable interest in using the maraging steels for critical components such as rocket motor cases, pressure vessels, and aircraft forgings. This report includes information on the tensile, compressive, shear, bearing, dynamic modulus, impact, bend, fatigue, creep, and rupture properties of the 18 per cent nickel maraging steels and on the effect of temperature on these properties. Data for the properties of sheet, bar, and forgings, as well as data illustrating the effect of cold rolling, variation in the heat treatment, and elevated-temperature exposure also are presented. Data on the effect of specimen orientation, which are also included, indicate that the ductility and toughness of specimens designed to evaluate the properties in the short transverse direction are somewhat lower than in the other directions. The high strength and toughness that can be obtained in the 18 per cent nickel maraging steels make them attractive for certain critical applications that require these properties. The fabrication characteristics, weldability, and simple heat treatment are other advantages of these steels. (Author).

Download or read book The Metallurgy Behavior and Application of the 18 percent Nickel Maraging Steels A Survey written by A. M. Hall and published by . This book was released on 1968 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report resulted from a survey of users and manufacturers of maraging steels, Government agencies, research institutions, and published literature. It presents the technical status of the 18-percent nickel maraging steels in detail and brings together a large body of knowledge with regard to the metallurgical and engineering aspects of maraging steels. Since such steels were first announced in 1959, they have become highly important in aerospace, defense, and industrial work. The requirements of the National Aeronautics and Space Administration have given impetus to their development, and research now underway is expected to result in further improvements and applicability. The NASA Office of Technology Utilization sponsored this report as part of its program to disseminate information on technological developments which appear to be useful for general industrial applications.

Download or read book Maraging Steels written by W Sha and published by Elsevier. This book was released on 2009-10-26 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maraging steels are high-strength steels combined with good toughness. They are used particularly in aerospace and tooling applications. Maraging refers to the ageing of martensite, a hard microstructure commonly found in steels.Maraging steels: modelling of microstructure, properties and applications covers the following topics: Introduction to maraging steels; Microstructure of maraging steels; Mechanical properties of maraging steels; Thermodynamic calculations for quantifying the phase fraction and element partition in maraging systems and precipitation hardening steels; Quantification of phase transformation kinetics in maraging steels; Quantification of age hardening in maraging steels; Maraging steels and overageing; Precipitation hardening stainless steel; Applications of artificial neural network on modelling maraging steel properties.With its distinguished authors, Maraging steels: modelling of microstructure, properties and applications is a standard reference for industry and researchers concerned with maraging steels and modelling as well as users of maraging steels in the aerospace and tooling sectors. The book includes both conventional maraging steels and precipitation hardened (PH) stainless steels. - Provides an overview of maraging steels including microstructure and mechanical properties - Reviews thermodynamic calculations for quantifying the phase fraction and element partition in maraging steels - Includes chapters on the quantification of phase transformation kinetics and age hardening in maraging steels

Download or read book Introduction to Aerospace Materials written by Adrian P Mouritz and published by Elsevier. This book was released on 2012-05-23 with total page 637 pages. Available in PDF, EPUB and Kindle. Book excerpt: The structural materials used in airframe and propulsion systems influence the cost, performance and safety of aircraft, and an understanding of the wide range of materials used and the issues surrounding them is essential for the student of aerospace engineering.Introduction to aerospace materials reviews the main structural and engine materials used in aircraft, helicopters and spacecraft in terms of their production, properties, performance and applications.The first three chapters of the book introduce the reader to the range of aerospace materials, focusing on recent developments and requirements. Following these introductory chapters, the book moves on to discuss the properties and production of metals for aerospace structures, including chapters covering strengthening of metal alloys, mechanical testing, and casting, processing and machining of aerospace metals. The next ten chapters look in depth at individual metals including aluminium, titanium, magnesium, steel and superalloys, as well as the properties and processing of polymers, composites and wood. Chapters on performance issues such as fracture, fatigue and corrosion precede a chapter focusing on inspection and structural health monitoring of aerospace materials. Disposal/recycling and materials selection are covered in the final two chapters.With its comprehensive coverage of the main issues surrounding structural aerospace materials,Introduction to aerospace materials is essential reading for undergraduate students studying aerospace and aeronautical engineering. It will also be a valuable resource for postgraduate students and practising aerospace engineers. - Reviews the main structural and engine materials used in aircraft, helicopters and space craft in terms of their properties, performance and applications - Introduces the reader to the range of aerospace materials, focusing on recent developments and requirements, and discusses the properties and production of metals for aerospace structures - Chapters look in depth at individual metals including aluminium, titanium, magnesium, steel and superalloys

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1979 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Index to DMIC Reports and Memoranda written by Battelle Memorial Institute. Defense Metals Information Center and published by . This book was released on 1968 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Metallurgy Behavior and Application of the 18 percent Nickel Maraging Steels written by Albert M. Hall and published by . This book was released on 1968 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Some Effects of Cold Working by Hydrostatic Extrusion on Mechanical Properties of High strength Steels written by Charles P. Blankenship and published by . This book was released on 1971 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Abstract Bulletin written by and published by . This book was released on with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book U S Government Research Reports written by and published by . This book was released on 1963 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Welding High strength Steels written by P. A. Kammer and published by . This book was released on 1966 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent studies of the developments in welding steels with yield strengths greater than 150 ksi have included low-alloy martensitic steels, medium-alloy martensitic steels, nickel maraging steels, and bainitic steels. Only weldments from medium-alloy martensitic steels and nickel maraging steels have mechanical properties approaching those of the base plate without a complete postweld heat treatment. The most serious problem with the other steel is low toughness in the weld fusion zone. Adequate weld metal toughness under conditions of elastic strain can be obtarined over the entire 150 to 225 ksi yield-strength range only if the tungsten-arc welding process is used. Processes with higher deposition rates can produce comparable weld deposits only in the lower portion of the range. Above a yield strength of 200 ksi, 18Ni maraging steel weldments have the best combination of strength and toughness. Below 200 ksi, the HP 9-4-25 medium-alloy martensitic steel and 12Ni maraging steel weldments have nearly equal properties.

Download or read book Source Book on Maraging Steels written by Raymond Frank Decker and published by ASM International(OH). This book was released on 1979 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book NBS Monograph written by and published by . This book was released on 1959 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Welding of Maraging Steels written by F. H. Lang and published by . This book was released on 1971 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Aerospace Structural Metals Handbook written by and published by . This book was released on 1989 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book U S Government Research Reports written by and published by . This book was released on 1964 with total page 1586 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nickel and Its Alloys written by Samuel Jacob Rosenberg and published by . This book was released on 1968 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: