Download or read book The Manufacture of High Temperature Superconducting Tapes and Films written by Kurt A. Richardson and published by Universal-Publishers. This book was released on 1999-11 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: The phenomena of superconductivity has enormous industrial potential, but the penetration of superconductor-based products has, thus far, been slow. An indisputable fact is that there are prizes, and profits, for the teams that solve the critical problems in understanding and processing these complex materials. The continuous processing of superconducting tapes and wires is a necessary stage that will open up the industrial market to the designers of a diverse range of time and energy saving devices, particularly in ultra-fast computing and lossless power transmission. The aim of the research reported herein was to investigate the fabrication of superconducting tapes and films via two different processes, namely: the established PIT technique, and a less well known electrochemical route. The PIT research yielded partially textured (a characteristic not found in previously reported thallium-based PIT tapes) and high purity tapes with promising transport properties. The main subject of this work is the electrodeposition of superconducting films with particular emphasis on the optimisation of the deposition process, as opposed to the optimisation of the post-deposition heat treatment. This is not a well researched area. Therefore the research herein deals with the mechanisms of the deposition process in order to achieve a high standard of reproducibility in producing a variety of superconductor precursor films. The heat-treatment of the as-deposited films was determined, and results are presented concerning the characteristics of the resulting superconducting films. An attempt was made to fabricate, for the first time via electrodeposition, (Tl, Pb)-1223 films. Superconductivity was successfully observed in both Bismuth- and Thallium-based films. Extensive further work is required, but the impact upon society from superconducting devices draws ever nearer.
Download or read book The Manufacture of High Temperature Superconducting Tapes and Films written by Kurt Antony Richardson and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Superconducting Materials Science and Engineering written by Donglu Shi and published by Elsevier. This book was released on 1995-02-20 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the fascinating field of high-temperature superconductivity. Basic concepts–including experimental techniques and theoretical issues–are discussed in a clear, systematic manner. In addition, the most recent research results in the measurements, materials synthesis and processing, and characterization of physical properties of high-temperature superconductors are presented. Researchers and students alike can use this book as a comprehensive introduction not only to superconductivity but also to materials-related research in electromagnetic ceramics. Special features of the book: presents recent developments in vortex-state properties, defects characterization, and phase equilibrium introduces basic concepts for experimental techniques at low temperatures and high magnetic fields provides a valuable reference for materials-related research discusses potential industrial applications of high-temperature superconductivity includes novel processing technologies for thin film and bulk materials suggests areas of research and specific problems whose solution can make high-Tc superconductors a practical reality
Download or read book High Temperature Superconductivity 1 written by A. V. Narlikar and published by Springer Science & Business Media. This book was released on 2004 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: In contrast to research on the fundamental mechanisms of High-Temperature Superconductivity, in recent years we have seen enormous developments in the fabrication and application of High-Tc-superconductors. The two volumes of High Temperature Superconductivity provide a survey of the state of the technology and engineering applications of these materials. They comprise extended original research papers and technical review articles written by physicists, chemists, materials scientists and engineers, all of them noted experts in their fields. The interdisciplinary and strictly application-oriented coverage should benefit graduate students and academic researchers in the mentioned areas as well as industrial experts. Volume 1 "Materials" focuses on major technical advancements in High-Tc materials processing for applications. Volume 2 "Engineering Applications" covers numerous application areas where High-Tc superconductors are making tremendous impact.
Download or read book Physical Properties of High Temperature Superconductors written by Rainer Wesche and published by John Wiley & Sons. This book was released on 2015-07-07 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: A much-needed update on complex high-temperature superconductors, focusing on materials aspects; this timely book coincides with a recent major break-through of the discovery of iron-based superconductors. It provides an overview of materials aspects of high-temperature superconductors, combining introductory aspects, description of new physics, material aspects, and a description of the material properties This title is suitable for researchers in materials science, physics and engineering. Also for technicians interested in the applications of superconductors, e.g. as biomagnets
Download or read book High Temperature Superconductors written by Rainer Wesche and published by Springer Nature. This book was released on with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced High Temperature Superconductor Film based Process Using RABiTS written by and published by . This book was released on 2000 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this Cooperative Research and Development Agreement (CRADA) between Lockheed Martin Energy Research Corporation (Contractor), Managing contractor for Oak Ridge National Laboratory (ORNL) and Midwest Superconductivity, Inc. (MSI) and Westinghouse Science and Electric Company (WEC) was to develop the basis for a commercial process for the manufacturing of superconducting tape based on the RABiTS technology developed at ORNL. The chosen method for deposition of YBCO films on RABiTS was Metal Organic chemical Vapor Deposition (MOCVD).
Download or read book Physical Properties of High Temperature Superconductors written by Rainer Wesche and published by John Wiley & Sons. This book was released on 2015-05-13 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: A much-needed update on complex high-temperature superconductors, focusing on materials aspects; this timely book coincides with a recent major break-through of the discovery of iron-based superconductors. It provides an overview of materials aspects of high-temperature superconductors, combining introductory aspects, description of new physics, material aspects, and a description of the material properties This title is suitable for researchers in materials science, physics and engineering. Also for technicians interested in the applications of superconductors, e.g. as biomagnets
Download or read book Handbook of Superconducting Materials written by David A. Cardwell and published by CRC Press. This book was released on 2003 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the advent of High Temperature Superconductivity and the increasing reliability of fabrication techniques, superconductor technology has moved firmly into the mainstream of academic and industrial research. There is currently no single source of practical information giving guidance on which technique to use for any particular category of superconductor. An increasing number of materials scientists and electrical engineers require easy access to practical information, sensible advice and guidance on 'best-practice' and reliable, proven fabrication and characterisation techniques.The Handbook will be the definitive collection of material describing techniques for the fabrication and analysis of superconducting materials. In addition to the descriptions of techniques, authoritative discussions written by leading researchers will give guidance on the most appropriate technique for a particular situation.Characterisation and measurement techniques will form an important part of the Handbook, providing researchers with a standard reference for experimental techniques. The tutorial style description of these techniques makes the Handbook particularly suitable for use by graduate students.The Handbook will be supported by a comprehensive web site which will be updated with new data as it emerges.The Handbook has six main sections: -- Fundamentals of Superconductivity - characteristic properties, elementary theory, critical current of type II superconductors-- Processing - bulk materials, wires and tapes, thick and think films, contact techniques-- Characterisation Techniques - structure/microstructure, measurement and interpretation of electromagnetic properties,measurement of physics properties-- Materials - characteristic properties of low and high Tc materials-- Applications - high current applications, trapped flux devices, high frequency devices, josephson junction devic
Download or read book Manufacture of 2nd Generation High Temperature Superconducting Thin Films with a Green Processing Technology written by Dong He and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Research for Manufacturing written by Lynnette D Madsen and published by Springer. This book was released on 2016-01-14 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about applied materials research in industry. It presents various important topics and challenges and gives guidance to materials researchers who move to industry. The book focuses on the materials manufacturing issues for industrial application. It deals with developments and challenges in traditional materials areas, such as metals and ceramics, and new opportunities that have risen from nanotechnology and additive manufacturing. The chapters, written by senior people from large companies, include successful manufacturing undertakings, several distinct and unresolved manufacturing challenges, with the focus on approaches, timelines and the skills needed for future company research and development. The book provides a cross-section of current and future approaches valuable for new employees and academics working in industry.
Download or read book Physical and Material Properties of High Temperature Superconductors written by S. K. Malik and published by Nova Publishers. This book was released on 1994 with total page 746 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical & Material Properties of High Temperature Superconductors
Download or read book Microstructure and Properties of High Temperature Superconductors written by I. A. Parinov and published by Springer Science & Business Media. This book was released on 2013-01-22 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main features of high-temperature superconductors (HTSC) that define their properties are intrinsic brittleness of oxide cuprates, the layered anisotropic structure and the supershort coherence length. Taking into account these features, this treatise presents research into HTSC microstructure and properties, and also explores the possibilities of optimization of the preparation techniques and superconducting compositions. The "composition-technique-experiment-theory-model," employed here, assumes considerable HTSC defectiveness and structure heterogeneity and helps to draw a comprehensive picture of modern representations of the microstructure, strength and the related structure-sensitive properties of the materials considered. Special attention is devoted to the Bi-Sr-Ca-Cu-O and Y-Ba-Cu-O families, which currently offer the most promising applications. Including a great number of illustrations and references, this monograph addresses students, post-graduate students and specialists, taking part in the development, preparation and research of new materials. The new edition had been updated intensively, especially experimental investigations and modeling conductive and elastic properties of HTC superconductors have been added.
Download or read book Review written by Oak Ridge National Laboratory and published by . This book was released on 2002 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Official Gazette of the United States Patent and Trademark Office written by and published by . This book was released on 1999 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High temperature Superconductivity Bhtsc 92 Proceedings Of The Beijing International Conference written by Z X Zhao and published by World Scientific. This book was released on 1993-10-13 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume will contain both invited and contributed papers which focus on the search for new high-Tc materials, characterization of their physical properties and microstructures, basic applications and the application of high-Tc superconductors.
Download or read book High Temperature Superconductors written by X G Qiu and published by Elsevier. This book was released on 2011-03-28 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: High temperature superconductors have received a great deal of attention in recent years, due to their potential in device and power applications. This book summarises the materials science and physics of all the most important high temperature superconductors as well as discussing material growth, properties and applications. Part one covers fundamental characteristics of high temperature superconductors and high TC films such as deposition technologies, growth, transport properties and optical conductivity. Part two is concerned with growth techniques and properties of high temperature superconductors, including YBCO, BSCCO and HTSC high TC films, and electron-doped cuprates. Finally, part three describes the various applications of high temperature superconductors, from Josephson junctons and dc-superconductive quantum inference devices (dc-SQUIDs) to microwave filters. With its distinguished editor and international team of contributors, this book is an invaluable resource for those researching high temperature superconductors, in industry and academia. In light of the many recent advances in high temperature superconductors, it will benefit physicists, materials scientists and engineers working in this field, as well as in areas of industrial application, such as electronic devices and power transmission. Summarises the materials science and physics of all the most important high temperature superconductors Discusses material growth, properties and applications Outlines fundamental characteristics of high temperature superconductors and high TC films
