Download or read book Job Hazard Analysis written by James Roughton and published by Butterworth-Heinemann. This book was released on 2011-04-08 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Job Hazard Analysis: A Guide for Voluntary Compliance and Beyond presents a new and improved concept for Job Hazard Analysis (JHA) that guides the reader through the whole process of developing tools for identifying workplace hazards, creating systems that support hazard recognition, designing an effective JHA, and integrating a JHA based program into occupational safety and health management systems. The book goes beyond the traditional approach of focusing just on the sequence of steps and demonstrates how to integrate a risk assessment and behavioral component into the process by incorporating elements from Behavior-Related Safety and Six Sigma. This approach allows businesses to move from mere compliance to pro-active safety management. This book methodically develops the risk assessment basis needed for ANSI/AIHA Z10 and other safety and health management systems. It is supported by numerous real-life examples, end of chapter review questions, sample checklists, action plans and forms. There is a complete online solutions manual for instructors adopting the book in college and university occupational safety and health courses. This text is intended for lecturers and students in occupational safety and health courses as well as vocational and degree courses at community colleges and universities. It will also appeal to safety and health professionals in all industries; supervisors, senior managers and HR professionals with responsibility for safety and health; and loss control and insurance professionals. Enhances the JHA with concepts from Behavior- Related Safety and proven risk assessment strategies using Six Sigma tools Methodically develops the risk assessment basis needed for ANSI/AIHA Z10 and other safety and health management systems Includes numerous real-life examples, end of chapter review questions, sample checklists, action plans and forms
Download or read book The Job Safety Analysis Process written by and published by . This book was released on 1990 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Job Safety Analysis written by and published by . This book was released on 1994 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safe Work in the 21st Century written by Institute of Medicine and published by National Academies Press. This book was released on 2000-09-01 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite many advances, 20 American workers die each day as a result of occupational injuries. And occupational safety and health (OSH) is becoming even more complex as workers move away from the long-term, fixed-site, employer relationship. This book looks at worker safety in the changing workplace and the challenge of ensuring a supply of top-notch OSH professionals. Recommendations are addressed to federal and state agencies, OSH organizations, educational institutions, employers, unions, and other stakeholders. The committee reviews trends in workforce demographics, the nature of work in the information age, globalization of work, and the revolution in health care deliveryâ€"exploring the implications for OSH education and training in the decade ahead. The core professions of OSH (occupational safety, industrial hygiene, and occupational medicine and nursing) and key related roles (employee assistance professional, ergonomist, and occupational health psychologist) are profiled-how many people are in the field, where they work, and what they do. The book reviews in detail the education, training, and education grants available to OSH professionals from public and private sources.
Download or read book Job Instructor Training written by and published by . This book was released on 1942 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prevention of Accidents and Unwanted Occurrences written by Urban Kjellen and published by CRC Press. This book was released on 2017-03-07 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition comes after about 15 years of development in the field of safety science and practice. The book addresses the question of how to improve risk assessments, investigations, and organizational learning inside companies in order to prevent unwanted occurrences. The book helps the reader in analyzing the subject from different scientific perspectives to demonstrate how they contribute to an overall understanding. It also gives a comprehensive overview of different methods and tools for use in safety practice and helps the reader in analyzing their scope, merits, and shortcomings. The book raises a number of critical issues to be addressed in the improvement process.
Download or read book Five Steps to Risk Assessment written by HSE Books and published by . This book was released on 2006 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers guidance for employers and self employed people in assessing risks in the workplace. This book is suitable for firms in the commercial, service and light industrial sectors.
Download or read book System Reliability Theory written by Marvin Rausand and published by John Wiley & Sons. This book was released on 2003-12-05 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thoroughly updated and revised look at system reliability theory Since the first edition of this popular text was published nearly a decade ago, new standards have changed the focus of reliability engineering and introduced new concepts and terminology not previously addressed in the engineering literature. Consequently, the Second Edition of System Reliability Theory: Models, Statistical Methods, and Applications has been thoroughly rewritten and updated to meet current standards. To maximize its value as a pedagogical tool, the Second Edition features: Additional chapters on reliability of maintained systems and reliability assessment of safety-critical systems Discussion of basic assessment methods for operational availability and production regularity New concepts and terminology not covered in the first edition Revised sequencing of chapters for better pedagogical structure New problems, examples, and cases for a more applied focus An accompanying Web site with solutions, overheads, and supplementary information With its updated practical focus, incorporation of industry feedback, and many new examples based on real industry problems and data, the Second Edition of this important text should prove to be more useful than ever for students, instructors, and researchers alike.
Download or read book Health and Safety Needs of Older Workers written by Institute of Medicine and published by National Academies Press. This book was released on 2004-03-26 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mirroring a worldwide phenomenon in industrialized nations, the U.S. is experiencing a change in its demographic structure known as population aging. Concern about the aging population tends to focus on the adequacy of Medicare and Social Security, retirement of older Americans, and the need to identify policies, programs, and strategies that address the health and safety needs of older workers. Older workers differ from their younger counterparts in a variety of physical, psychological, and social factors. Evaluating the extent, causes, and effects of these factors and improving the research and data systems necessary to address the health and safety needs of older workers may significantly impact both their ability to remain in the workforce and their well being in retirement. Health and Safety Needs of Older Workers provides an image of what is currently known about the health and safety needs of older workers and the research needed to encourage social polices that guarantee older workers a meaningful share of the nation's work opportunities.
Download or read book Developing an Effective Safety Culture written by James Roughton and published by Elsevier. This book was released on 2002-03-25 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing an Effective Safety Culture implements a simple philosophy, namely that working safely is a cultural issue. An effective safety culture will eventually lead to the desired goal of zero incidents in the work place, and this book will provide an understanding of what is needed to reach this goal. The authors present reference material for all phases of building a safety management system and ultimately developing a safety program that fits the culture.This volume offers the most comprehensive approach to developing an effective safety culture. Information is easily accessible as the authors move first through, understanding the cost of incidents, then to perspectives and descriptions of management systems, principal management leadership traits, establishing and evaluating goals and objectives, providing visible leadership, and assigning required responsibilities. In addition, you are given the means to systematically identifying hazards and develop your own hazard inventory and control system. Further information on OSHA requirements for training, behavior-based safety processes, and the development of a job hazard analysis for each task is available as well. Valuable case studies, from the authors' own experience in the industry, are used throughout to demonstrate the concepts presented.* Provides the tools to rebuild or enhance a desired safety culture* Allows you to identify a program that will fit your specific application* Examines different philosophies in relation to safety culture development
Download or read book Safety Analysis written by Lars Harms-Ringdahl and published by CRC Press. This book was released on 2001-06-28 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety analysis can be applied as a practical tool in occupational safety. It has three main elements: the identification of hazards, the assessment of risks that arise, and the generation of measures to increase the level of safety. A number of simple methods are described that can be used in industry and the workplace, such as deviation analysis,
Download or read book Managing the Causes of Work related Stress written by Great Britain. Health and Safety Executive and published by . This book was released on 2007 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the Management Standards, this new guide will help you, your employees and their representatives manage the issue sensibly and minimise the impact of work-related stress on your business. It might also help you improve how your organisation performs.
Download or read book Hazard Analysis Techniques for System Safety written by Clifton A. Ericson, II and published by John Wiley & Sons. This book was released on 2015-06-12 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explains in detail how to perform the most commonly used hazard analysis techniques with numerous examples of practical applications Includes new chapters on Concepts of Hazard Recognition, Environmental Hazard Analysis, Process Hazard Analysis, Test Hazard Analysis, and Job Hazard Analysis Updated text covers introduction, theory, and detailed description of many different hazard analysis techniques and explains in detail how to perform them as well as when and why to use each technique Describes the components of a hazard and how to recognize them during an analysis Contains detailed examples that apply the methodology to everyday problems
Download or read book Risk Assessment written by Marvin Rausand and published by John Wiley & Sons. This book was released on 2020-03-31 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces risk assessment with key theories, proven methods, and state-of-the-art applications Risk Assessment: Theory, Methods, and Applications remains one of the few textbooks to address current risk analysis and risk assessment with an emphasis on the possibility of sudden, major accidents across various areas of practice—from machinery and manufacturing processes to nuclear power plants and transportation systems. Updated to align with ISO 31000 and other amended standards, this all-new 2nd Edition discusses the main ideas and techniques for assessing risk today. The book begins with an introduction of risk analysis, assessment, and management, and includes a new section on the history of risk analysis. It covers hazards and threats, how to measure and evaluate risk, and risk management. It also adds new sections on risk governance and risk-informed decision making; combining accident theories and criteria for evaluating data sources; and subjective probabilities. The risk assessment process is covered, as are how to establish context; planning and preparing; and identification, analysis, and evaluation of risk. Risk Assessment also offers new coverage of safe job analysis and semi-quantitative methods, and it discusses barrier management and HRA methods for offshore application. Finally, it looks at dynamic risk analysis, security and life-cycle use of risk. Serves as a practical and modern guide to the current applications of risk analysis and assessment, supports key standards, and supplements legislation related to risk analysis Updated and revised to align with ISO 31000 Risk Management and other new standards and includes new chapters on security, dynamic risk analysis, as well as life-cycle use of risk analysis Provides in-depth coverage on hazard identification, methodologically outlining the steps for use of checklists, conducting preliminary hazard analysis, and job safety analysis Presents new coverage on the history of risk analysis, criteria for evaluating data sources, risk-informed decision making, subjective probabilities, semi-quantitative methods, and barrier management Contains more applications and examples, new and revised problems throughout, and detailed appendices that outline key terms and acronyms Supplemented with a book companion website containing Solutions to problems, presentation material and an Instructor Manual Risk Assessment: Theory, Methods, and Applications, Second Edition is ideal for courses on risk analysis/risk assessment and systems engineering at the upper-undergraduate and graduate levels. It is also an excellent reference and resource for engineers, researchers, consultants, and practitioners who carry out risk assessment techniques in their everyday work.
Download or read book Occupational Health and Safety in the Care and Use of Nonhuman Primates written by National Research Council and published by National Academies Press. This book was released on 2003-06-13 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of occupational health and safety constantly changes, especially as it pertains to biomedical research. New infectious hazards are of particular importance at nonhuman-primate facilities. For example, the discovery that B virus can be transmitted via a splash on a mucous membrane raises new concerns that must be addressed, as does the discovery of the Reston strain of Ebola virus in import quarantine facilities in the U.S. The risk of such infectious hazards is best managed through a flexible and comprehensive Occupational Health and Safety Program (OHSP) that can identify and mitigate potential hazards. Occupational Health and Safety in the Care and Use of Nonhuman Primates is intended as a reference for vivarium managers, veterinarians, researchers, safety professionals, and others who are involved in developing or implementing an OHSP that deals with nonhuman primates. The book lists the important features of an OHSP and provides the tools necessary for informed decision-making in developing an optimal program that meets all particular institutional needs.
Download or read book Guidelines for Risk Based Process Safety written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2011-11-30 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Risk Based Process Safety provides guidelines for industries that manufacture, consume, or handle chemicals, by focusing on new ways to design, correct, or improve process safety management practices. This new framework for thinking about process safety builds upon the original process safety management ideas published in the early 1990s, integrates industry lessons learned over the intervening years, utilizes applicable "total quality" principles (i.e., plan, do, check, act), and organizes it in a way that will be useful to all organizations - even those with relatively lower hazard activities - throughout the life-cycle of a company.
Download or read book Advances in Materials Research written by G. Kumaresan and published by Springer. This book was released on 2022-02-19 with total page 1267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select peer-reviewed proceedings of the International Conference on Advances in Materials Research (ICAMR 2019). The contents cover latest research in materials and their applications relevant to composites, metals, alloys, polymers, energy and phase change. The indigenous properties of materials including mechanical, electrical, thermal, optical, chemical and biological functions are discussed. The book also elaborates the properties and performance enhancement and/or deterioration in order of the modifications in atomic particles and structure. This book will be useful for both students and professionals interested in the development and applications of advanced materials.
