Download or read book The Inhomogeneity of Plastic Deformation written by and published by . This book was released on 1973 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Severe Plastic Deformation Techniques written by Marcello Cabibbo and published by BoD – Books on Demand. This book was released on 2017-08-09 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grain size is recognized as a key microstructural factor affecting mechanical and, to some extent, physical properties of metals and metallic materials. For this reason, all the means designed to control and modify the grain size are considered a proper way to design and tailor metallic materials with desired properties. In this sense, microstructure refinement through severe plastic deformation (SPD) techniques can be considered a key method for this purpose. A typical SPD process is currently defined as any method of metal forming under extensive hydrostatic pressure intended to impose a very high strain on a bulk solid without involving any significant change in the overall dimensions and having the ability to produce exceptional grain refinement. What makes SPD processing techniques so popular and attractive is the possibility of using them to enhance the strength behavior of conventional metallic materials by a factor of up to eight for pure metals such as copper and by some 30-50% for alloys. Despite the impressive property improvement achievable with SPD techniques, their uptake by industry has been rather sluggish. This book intends to give a panorama of the typical SPD techniques intended to optimize the mechanical and physical properties of metals through a significant grain size reduction process. Modeling for this purpose is also presented.
Download or read book Constitutive Laws of Plastic Deformation and Fracture written by and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: 19th Canadian Fracture Conference, Ottawa, Ontario, May 29-31, 1989
Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel approach to the subject, providing detailed information about established and innovative mechanical testing procedures.
Download or read book Testing of the Plastic Deformation of Metals written by T. W. Clyne and published by Cambridge University Press. This book was released on 2021-06-10 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a novel, self-contained approach to an important technical area, providing both theoretical background and practical details. Coverage includes mechanics and physical metallurgy, as well as study of both established and novel procedures such as indentation plastometry. Numerical simulation (FEM modelling) is explored thoroughly, and issues of scale are discussed in depth. Discusses procedures designed to explore plasticity under various conditions, and relates sample responses to deformation mechanisms, including microstructural effects. Features references throughout to industrial processing and component usage conditions, to a wide range of metallic alloys, and to effects of residual stresses, anisotropy and inhomogeneity within samples. A perfect tool for materials scientists, engineers and researchers involved in mechanical testing (of metals), and those involved in the development of novel materials and components.
Download or read book Dislocation Mechanism Based Crystal Plasticity written by Zhuo Zhuang and published by Academic Press. This book was released on 2019-04-12 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dislocation Based Crystal Plasticity: Theory and Computation at Micron and Submicron Scale provides a comprehensive introduction to the continuum and discreteness dislocation mechanism-based theories and computational methods of crystal plasticity at the micron and submicron scale. Sections cover the fundamental concept of conventional crystal plasticity theory at the macro-scale without size effect, strain gradient crystal plasticity theory based on Taylar law dislocation, mechanism at the mesoscale, phase-field theory of crystal plasticity, computation at the submicron scale, including single crystal plasticity theory, and the discrete-continuous model of crystal plasticity with three-dimensional discrete dislocation dynamics coupling finite element method (DDD-FEM). Three kinds of plastic deformation mechanisms for submicron pillars are systematically presented. Further sections discuss dislocation nucleation and starvation at high strain rate and temperature effect for dislocation annihilation mechanism. Covers dislocation mechanism-based crystal plasticity theory and computation at the micron and submicron scale Presents crystal plasticity theory without size effect Deals with the 3D discrete-continuous (3D DCM) theoretic and computational model of crystal plasticity with 3D discrete dislocation dynamics (3D DDD) coupling finite element method (FEM) Includes discrete dislocation mechanism-based theory and computation at the submicron scale with single arm source, coating micropillar, lower cyclic loading pillars, and dislocation starvation at the submicron scale
Download or read book Unified Constitutive Laws of Plastic Deformation written by A. S. Krausz and published by Elsevier. This book was released on 1996-05-31 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-technology industries using plastic deformation demand soundly-based economical decisions in manufacturing design and product testing, and the unified constitutive laws of plastic deformation give researchers aguideline to use in making these decisions. This book provides extensive guidance in low cost manufacturing without the loss of product quality. Each highly detailed chapter of Unified Constitutive Laws of Plastic Deformation focuses on a distinct set of defining equations. Topics covered include anisotropic and viscoplastic flow, and the overall kinetics and thermodynamics of deformation. This important book deals with a prime topic in materials science and engineering, and will be of great use toboth researchers and graduate students. Describes the theory and applications of the constitutive law of plastic deformation for materials testing Examines the constitutive law of plastic deformation as it applies to process and product design Includes a program on disk for the determination and development of the constitutive law of plastic deformation Considers economical design and testing methods
Download or read book Plastic Deformation written by Daniel Hubbard and published by Nova Science Publishers. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the processes, properties and applications of plastic deformation. The first chapter provides short notes on the grains modification induced by local plastic deformation. Chapter Two examines energy accumulation and mechanisms of plastic deformation in organic glassy polymers. Chapter Three investigates the microstructure and texture of the pure magnesium foils obtained by room temperature reverse extrusion followed by cold rolling. The final chapter discusses utilization of severe plastic deformation (SPD) to produce ultrafine grained structures using top-down approach in novel metal forming processes.
Download or read book Finite Plastic Deformation of Crystalline Solids written by K. S. Havner and published by Cambridge University Press. This book was released on 1992-03-27 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Adiabatic Shear Localization written by Bradley Dodd and published by Elsevier. This book was released on 2012-05-22 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adiabatic shear localization is a mode of failure that occurs in dynamic loading. It is characterized by thermal softening occurring over a very narrow region of a material and is usually a precursor to ductile fracture and catastrophic failure. This reference source is the revised and updated version of the first detailed study of the mechanics and modes of adiabatic shear localization in solids. Building on the success of the first edition, the book provides a systematic description of a number of aspects of adiabatic shear banding. The concepts and techniques described in this work can usefully be applied to solve a multitude of problems encountered by those investigating fracture and damage in materials, impact dynamics, metal working and other areas. Specific chapters focus on energetic materials, polymers, bulk metal glasses, and the mathematics of shear banding as well as the numerical modeling of them. With its detailed coverage of the subject, this book is of great interest to academics and researchers into materials performance as well as professionals. Up-to-date coverage of the subject and research that has occurred over the past 20 years Each chapter is written on a different sub-field of adiabatic shear by an acknowledged expert in the field Detailed and clear discussions of each aspect
Download or read book Mechanical Behaviour of Materials VI written by M. Jono and published by Elsevier. This book was released on 2013-10-22 with total page 3510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Significant progress in the science and technology of the mechanical behaviour of materials has been made in recent years. The greatest strides forward have occurred in the field of advanced materials with high performance, such as ceramics, composite materials, and intermetallic compounds. The Sixth International Conference on Mechanical Behaviour of Materials (ICM-6), taking place in Kyoto, Japan, 29 July - 2 August 1991 addressed these issues. In commemorating the fortieth anniversary of the Japan Society of Materials Science, organised by the Foundation for Advancement of International Science and supported by the Science Council of Japan, the information provided in these proceedings reflects the international nature of the meeting. It provides a valuable account of recent developments and problems in the field of mechanical behaviour of materials.
Download or read book Ductility and Formability of Metals written by Giovanni Straffelini and published by Elsevier. This book was released on 2023-03-23 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ductility and Formability of Metals: A Metallurgical Engineering Perspective uses metallurgical, mechanical and physical principles and concepts to explain ductility while emphasizing the influence of material microstructure on damage mechanisms. Focusing on steel, aluminum, copper, titanium and magnesium alloys, the book examines the strain hardening behaviors of these metals and alloys, the influence of strain rate and temperature, and ductile fracture mechanics. Hot plastic deformation is covered with special consideration given to its interplay with recrystallization phenomena. Other phenomena such as Dynamic Strain Ageing (DSA) and Adiabatic Shear Banding (ASB) are discussed, and metal working applications such as forging, extrusion and machining are included throughout. Methods for control of ductile cracks in metal parts resulting from rolling, forging, extrusion, drawing, and sheet metal forming are also outlined. Provides an overview on the plastic deformation behavior and ductile fracture of steel, aluminum, copper, titanium and magnesium alloys Illustrates the influence of microstructure on yield behavior, strain hardening of metals, and the influence of strain rate and temperature Covers the role of the strain hardening coefficient (n), strain rate index (m), Dynamic Strain Ageing (DSA), and Adiabatic Shear Banding (ASB) Metalworking applications are provided throughout, including forging, rolling, extrusion, wire drawing, sheet metal forming and machining
Download or read book A Symposium on the Plastic Deformation of Crystalline Solids written by Mellon Institute of Industrial Research and published by . This book was released on 1950 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastic Deformation and Strain Hardening written by P.O. Kettunen and published by Trans Tech Publications Ltd. This book was released on 2003-03-01 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is based upon lectures given during a well-received course on physical metallurgy and originally intended for students specializing in fields related to metallic materials. But, as the author points out, metallic materials are the most widely investigated group of materials and their study therefore gives a good basis for understanding how other materials can be made to reveal interrelationships between their structures and properties; especially with regard to those properties associated with strain. Similar types of rule can then be applied to other materials, in spite of their apparent differences.
Download or read book Structure written by Gengxiang Hu and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-02-08 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook summarizes physical aspects of materials at atomic and molecular level, and discusses micro-structure of metals, alloys, ceramics and polymers. It further explains point defects, dislocations and surface imperfections, and the motions of atoms and molecular in solid state. As first volume in the set, it prepares students for further studies on phases and transitions which are discussed in the next volume.
Download or read book Rapidly Quenched Metals written by S Steeb and published by Elsevier. This book was released on 2012-12-02 with total page 1163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapidly Quenched Metals, Volume I covers the proceedings of the Fifth International Conference on Rapidly Quenched Metals, held in Wurzburg, Germany on September 3-7, 1984. The book focuses on amorphous and crystalline metals formed by rapid quenching from the melt. The selection first covers the scope and trends of developments in rapid solidification technology, rapid solidification, and undercooling of liquid metals by rapid quenching. Discussions focus on experimental method, powders, strip, particulate production, consolidation, and alloys and alloy systems. The text then examines the solidification of undercooled liquid alloys entrapped in solid; crystallization kinetics in undercooled droplets; and grain refinement in bulk undercooled alloys. The manuscript tackles the undercooling of niobium-germanium alloys in a 100 meter drop tube; influence of process parameters on the cooling rate of the meltspinning process; and the mechanism of ribbon formation in melt-spun copper and copper-zirconium. The formation and structure of thick sections of rapidly-solidified material by incremental deposition and production of ultrafine dispersions of rare earth oxides in Ti alloys using rapid solidification are also mentioned. The selection is a valuable reference for physicists, chemists, physical metallurgists, and engineers.
Download or read book Deformation of Metals During Rolling written by I. Ya. Tarnovskii and published by Elsevier. This book was released on 2013-10-22 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deformation of Metals during Rolling discusses the ductility of metal. The book explores the implication of the theory of flat cross section. The said theory explains that flat transverse-vertical cross-sections before deformation remain flat both in the zone of deformation and after rolling. Such theory has been accepted until some research appeared that opposed the basic view in the theory of rolling. Another theory discussed is the theory of inhomogeneous deformation. The book focuses on the fundamental hypotheses of the mechanics of continuous media. It also covers topics such as the creation of model of deformation that closely resembles the real conditions of the rolling process and the determination of boundary conditions. A section in the book presents information on the degree of the deformation of metal during compression. The text can be a good reference for industrial engineers and academic students doing research on the properties of steel and iron.
