Download or read book THE INFLUENCE OF SURFACE ON THE PROPERTIES OF MATERIALS written by M.J.SINNOTT and published by . This book was released on 1960 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surfaces and Interfaces II written by John Burke and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Army Materials and Mechanics Research Center has conducted the Sagamore Army Materials Research Conferences, in cooperation with the Metallurgical Research Laboratories of the Department of Chemical Engineering and Metallurgy of Syracuse University, since 1954. The purpose of the conferences has been to gather together scientists and engineers from academic institutions, industry, and government who are uniquely qualified to explore in depth a subject of importance to the Army, the Department of Defense and the scientific corr.munity. This volume, Surfaces and Interfaces ll: Physical and Mechanical Properties, can be considered a continuation, or perhaps an extension, of the information contained in Surfaces and Interfaces I: Chemical and Physical Characteristics. The emphasis in this volume is focused on: the technological significance of surfaces and interfaces; surface sensitive mechanical properties; environment-sensitive properties; control of grain structure; and composite materials. It is felt that the rather ambitious undertaking of the program committee to place the role of "surfaces and interfaces" in its proper context has been achieved. The balance between basic research findings and more applied research allows the reader a certain degree of latitude in the use of the two volumes. The continued active interest and support of these conferences by Col. C. T. Riordan, Commanding Officer, Dr. E. Scala, Technical Di rector, and J. F. Sullivan, Deputy Technical Director, of the Army Materials and Mechanics Research Center is appreciated.
Download or read book Surface Modification to Improve Properties of Materials written by Miran Mozetič and published by MDPI. This book was released on 2019-04-16 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected contributions on surface modification to improve the properties of solid materials. The surface properties are tailored either by functionalization, etching, or deposition of a thin coating. Functionalization is achieved by a brief treatment with non-equilibrium gaseous plasma containing suitable radicals that interact chemically with the material surface and thus enable the formation of rather stable functional groups. Etching is performed in order to modify the surface morphology. The etching parameters are selected in such a way that a rich morphology of the surfaces is achieved spontaneously on the sub-micrometer scale, without using masks. The combination of adequate surface morphology and functionalization of materials leads to superior surface properties which are particularly beneficial for the desired response upon incubation with biological matter. Alternatively, the materials are coated with a suitable thin film that is useful in various applications from food to aerospace industries.
Download or read book Concepts and Design of Materials Nanoarchitectonics written by Omar Azzaroni and published by Royal Society of Chemistry. This book was released on 2022-02-09 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of nanoarchitechtonics was introduced to describe the correct manipulation of nanoscale materials in the creation of nano-devices and applications. Nanoarchitectonics has begun to spread into many fields including nanostructured materials synthesis, supramolecular assembly, nanoscale structural fabrications, materials hybridizations, materials and structures for energy and environmental sciences, device and physical application, and bio- and medical applications. Following on from the 2012 title Manipulation of Nanoscale Materials, Concepts and Design of Materials Nanoarchitectonics covers the introductory features underlying the field, presenting a unifying overview of the theoretical aspects and emerging applications that are changing the capability to understand and design advanced functional materials. Edited by pioneers of the field, this book will appeal to researchers working in nanoscience, materials science, supramolecular chemistry, physical chemistry and organic chemistry, as well as graduate students in these areas.
Download or read book The Influence of Surface Phenomena on the Mechanical Properties of Structyral Materials fatigue of Aluminum in Vacuum written by John L. Ham and published by . This book was released on 1963* with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Material Concepts in Surface Reactivity and Catalysis written by Henry Wise and published by Elsevier. This book was released on 2012-12-02 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: Material Concepts in Surface Reactivity and Catalysis focuses on the physical and chemical properties of the surface in a reacting system, identifying surface properties that influence interfacial reactions in metal and nonmetal systems. This book discusses the bulk and surface imperfections, surface energy of multicomponent systems, adsorption isotherms and isosteres, and Lennard-Jones potential curves. The adsorbate-induced surface reconstruction, metal-support reactions, defect thermodynamics, and defect metal oxides with crystallographic shear structures are also elaborated. This text likewise covers the metal oxide catalysis, component segregation at grain boundaries, diffusion-controlled metal oxidation, and kinetics of metal deposition. This publication is useful to students in materials science, solid-state chemistry, and catalysis, as well as specialists engaged in research.
Download or read book Surface Properties And Engineering Of Complex Intermetallics written by Esther Belin-ferre and published by World Scientific. This book was released on 2010-02-25 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the third in a series of 4 books issued yearly as a deliverable of the research school established within the European Network of Excellence CMA (for Complex Metallic Alloys). It is written by reputed experts in the fields of surface physics and chemistry, metallurgy and process engineering, combining expertise found inside as well as outside the network.The CMA network focuses on the huge group of largely unknown multinary alloys and compounds formed with crystal structures based on giant unit cells containing clusters, with many tens or up to more than thousand atoms per unit cell. In these phases, for many phenomena, the physical length scales are substantially smaller than the unit-cell dimension. Hence, these materials offer unique combinations of properties, which are mutually excluded in conventional materials: metallic electric conductivity combined with low thermal conductivity, combination of good light absorption with high-temperature stability, combination of high metallic hardness with reduced wetting by liquids, electrical and thermal resistance tuneable by composition variation, excellent resistance to corrosion, reduced cold-welding and adhesion, enhanced hydrogen storage capacity and light absorption, etc.The series of books will concentrate on: development of fundamental knowledge with the aim of understanding materials phenomena, technologies associated with the production, transformation and processing of knowledge-based multifunctional materials, surface engineering, support for new materials development and new knowledge-based higher performance materials for macro-scale applications.
Download or read book Surface Effects in Solid Mechanics written by Holm Altenbach and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the actual state of the art and future trends of surface effects in solid mechanics. Surface effects are more and more important in the precise description of the behavior of advanced materials. One of the reasons for this is the well-known from the experiments fact that the mechanical properties are significantly influenced if the structural size is very small like, for example, nanostructures. In this book, various authors study the influence of surface effects in the elasticity, plasticity, viscoelasticity. In addition, the authors discuss all important different approaches to model such effects. These are based on various theoretical frameworks such as continuum theories or molecular modeling. The book also presents applications of the modeling approaches.
Download or read book Introduction to the Properties of Crystal Surfaces written by J. M. Blakely and published by Elsevier. This book was released on 2013-10-22 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to the Properties of Crystal Surfaces is an introductory text on crystal surfaces and their properties. A variety of phenomena, including electron emission, adsorption and oxidation, adhesion, friction, nucleation and epitaxial growth, and heterogeneous catalysis, are described by considering the details of the atomic and electronic structure in the surface region. This volume is comprised of seven chapters and begins with a discussion on the thermodynamics of surfaces, along with the equilibrium configuration at the intersection of interfaces and the effects of curvature of crystalline surfaces. The next chapter examines the properties of interfaces in multi-component systems, followed by an analysis of experimental measurements of surface tension in solids. The atomic structure of crystal surfaces and some theoretical aspects of surface studies are also considered, and experimental methods in used in such studies are outlined. The final chapter deals with two atomic processes that are involved in a number of reactions at crystal surfaces: surface atomic diffusion and adsorption. This book is intended for senior undergraduates in a materials science type of curriculum or those beginning research work in the field or associated areas.
Download or read book Characterisation of Areal Surface Texture written by Richard Leach and published by Springer Science & Business Media. This book was released on 2013-04-03 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: The function of a component part can be profoundly affected by its surface topography. There are many examples in nature of surfaces that have a well-controlled topography to affect their function. Examples include the hydrophobic effect of the lotus leaf, the reduction of fluid drag due to the riblet structure of shark skin, the directional adhesion of the gecko foot and the angular sensitivity of the multi-faceted fly eye. Surface structuring is also being used extensively in modern manufacturing. In this way many properties can be altered, for example optical, tribological, biological and fluidic. Previously, single line (profile) measurements were adequate to control manufacture of surfaces, but as the need to control the functionality of surfaces increases, there is a growing need for three-dimensional (areal) measurement and characterisation techniques. For this reason there has been considerable research, development and standardisation of areal techniques. This book will present the areal framework that is being adopted by the international community. Whereas previous books have concentrated on the measurement aspects, this book concentrates on the characterisation techniques, i.e. how to interpret the measurement data to give the appropriate (functional) information for a given task. The first part of the book presents the characterisation methods and the second part case studies that highlight the use of areal methods in a broad range of subject areas - from automobile manufacture to archaeology. Contents Introduction to Surface Topography The Areal Field Parameters The Areal Feature Parameters Areal Filtering Methods Areal Form Removal Areal Fractal Methods Choosing the Appropriate Parameter Characterisation of Individual Areal Features Multi-Scale Signature of Surface Topography Correlation of Areal Surface Texture Parameters to Solar Cell Efficiency Characterisation of Cylinder Liner Honing Textures for Production Control Characterisation of the Mechanical Bond Strength for Copper on Glass Plating Applications Inspection of Laser Structured Cams and Conrods Road Surfaces
Download or read book Perspectives in Materials Research written by National Research Council (U.S.). Advisory Committee on Perspectives in Materials Research and published by . This book was released on 1963 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Modification of Polymers written by Jean Pinson and published by John Wiley & Sons. This book was released on 2020-02-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to modifying and functionalizing the surfaces of polymers Surface Modification of Polymers is an essential guide to the myriad methods that can be employed to modify and functionalize the surfaces of polymers. The functionalization of polymer surfaces is often required for applications in sensors, membranes, medicinal devices, and others. The contributors?noted experts on the topic?describe the polymer surface in detail and discuss the internal and external factors that influence surface properties. This comprehensive guide to the most important methods for the introduction of new functionalities is an authoritative resource for everyone working in the field. This book explores many applications, including the plasma polymerization technique, organic surface functionalization by initiated chemical vapor deposition, photoinduced functionalization on polymer surfaces, functionalization of polymers by hydrolysis, aminolysis, reduction, oxidation, surface modification of nanoparticles, and many more. Inside, readers will find information on various applications in the biomedical field, food science, and membrane science. This important book: -Offers a range of polymer functionalization methods for biomedical applications, water filtration membranes, and food science -Contains discussions of the key surface modification methods, including plasma and chemical techniques, as well as applications for nanotechnology, environmental filtration, food science, and biomedicine -Includes contributions from a team of international renowned experts Written for polymer chemists, materials scientists, plasma physicists, analytical chemists, surface physicists, and surface chemists, Surface Modification of Polymers offers a comprehensive and application-oriented review of the important functionalization methods with a special focus on biomedical applications, membrane science, and food science.
Download or read book Microstructure and Wear of Materials written by K.-H. Zum Gahr and published by Elsevier. This book was released on 1987-03-01 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book will be useful not only to practising engineers and scientists, but also to advanced students interested in wear. It reviews our current understanding of the influence of microstructural elements and physical properties of materials (metals, polymers, ceramics and composites) on wear.The introductory chapters describe the relation between microstructure and mechanical properties of materials, surfaces in contact and the classification of wear processes. The following chapters are concerned with wear modes of great practical interest such as grooving wear, sliding wear, rolling-sliding wear and erosive wear. Our present understanding of abrasion, adhesion, surface fatigue and tribochemical reactions as the relevant wear mechanisms is discussed, and new wear models are presented. In addition to extensive experimental results, sketches have been widely used for clarifying the physical events.
Download or read book Beyond the Molecular Frontier written by National Research Council and published by National Academies Press. This book was released on 2003-03-19 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry and chemical engineering have changed significantly in the last decade. They have broadened their scopeâ€"into biology, nanotechnology, materials science, computation, and advanced methods of process systems engineering and controlâ€"so much that the programs in most chemistry and chemical engineering departments now barely resemble the classical notion of chemistry. Beyond the Molecular Frontier brings together research, discovery, and invention across the entire spectrum of the chemical sciencesâ€"from fundamental, molecular-level chemistry to large-scale chemical processing technology. This reflects the way the field has evolved, the synergy at universities between research and education in chemistry and chemical engineering, and the way chemists and chemical engineers work together in industry. The astonishing developments in science and engineering during the 20th century have made it possible to dream of new goals that might previously have been considered unthinkable. This book identifies the key opportunities and challenges for the chemical sciences, from basic research to societal needs and from terrorism defense to environmental protection, and it looks at the ways in which chemists and chemical engineers can work together to contribute to an improved future.
Download or read book Chemistry Materials and Properties of Surface Coatings written by Güngör Gündüz and published by DEStech Publications, Inc. This book was released on 2015-05-14 with total page 765 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific reference covers all surface coatings, paint types, components and formulationsSolvent-, water-based, polymeric, metallic, anti-corrosion, powder and advanced active coatingsChemical equations, molecular configurations and polymer chains linked to key structure/property relationsTechnical details on specialized coatings for marine, automotive and aerospace This professional reference is a unified account of the chemistry and materials science of virtually all major resins, paints, polymeric and inorganic coatings. It offers uniform analyses of the chemical formulations and molecular structures of widely used solvent- and water-based paints and coatings, including discussions of binders, pigments and fillers. In the context of a scientific analysis of structure-property relations the book addresses adhesion, shelf-life, durability, volatility, hardness, mechanical, optical and other engineered qualities. Emerging active coatings such as conductive, self-cleaning, self-healing paints/coatings, plus eco-friendly powder coatings, are included.
Download or read book Surface Engineering written by Dheerendra Kumar Dwivedi and published by Springer. This book was released on 2018-04-04 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to help engineers analyze service condition and potential mechanisms of surface degradation. This will enable engineers select suitable materials for improved service-life and performance of engineering components. The book comprises 7 chapters, and is well illustrated with schematics, photographs, microstructure, XRD patterns, EDAX mapping, and technical data tables. The book focuses on the influence of materials and methods of surface engineering on structure, properties, and wear-performance of engineering components. It begins with the need to study the subject of surface engineering, scope of surface engineering, and classification of techniques of surface engineering. The book covers conventional material system (steel, cast iron, stellite, WC-Co, PCDs, etc.) and new materials like multilayer structures, functionally gradient materials (FGMs), intermetallic barrier coatings, and thermal barrier coating. The book covers most conventional as well as advanced surface engineering techniques, such as burnishing, shot peening, flame and induction hardening, laser and electron beam hardening, plasma and TIG melting, carburizing, nitriding, cyaniding, boronizing, vanadizing, ion implantation, laser alloying, chemical vapor deposition, PE chemical vapor deposition, physical vapor deposition, weld overlays, laser cladding, hot dip galvanizing, hot dip lead tin coating, hot dip aluminizing, hot dip chromizing, electroplating, electroless plating (Ni-P and Ni-B), mechanical plating, roll bonding, explosive bonding, and hot isostatic. The book also includes an introductory chapter on friction-stir processing of aluminum and titanium alloys. Further, it discusses studies on structure, mechanical and wear properties of weld surfacing, flame spray coating, HVOF sprayed coating, laser cladding of ferrous metals, nickel and cobalt based alloys and their composites in as-sprayed and heat-treated conditions. The book provides a comprehensive overview of various destructive and nondestructive techniques used for characterization of engineered surfaces. The materials in the book will be useful to undergraduate and graduate students. In addition, the contents of this book can also be used for professional development courses for practicing engineers.
Download or read book Surface Properties of Materials written by Leonard L. Levenson and published by . This book was released on 1975 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt:
