Download or read book The Formation Characterization and Application of Sputtered Al203 and Gamma Fe202 Thin Films written by Ga-Lane Chen and published by . This book was released on 1985 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sol Gel Technologies for Glass Producers and Users written by Michel Andre Aegerter and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Techniques for Glass Producers and Users provides technological information, descriptions and characterizations of prototypes, or products already on the market, and illustrates advantages and disadvantages of the sol-gel process in comparison to other methods. The first chapter entitled "Wet Chemical Technology" gives a summary of the basic principles of the sol-gel chemistry. The most promising applications are related to coatings. Chapter 2 describes the various "Wet Chemical Coating Technologies" from glass cleaning to many deposition and post-coating treatment techniques. These include patterning of coatings through direct or indirect techniques which have became very important and for which the sol-gel processing is particularly well adapted. Chapter 3 entitled "Bulk Glass Technologies" reports on the preparation of special glasses for different applications. Chapter 4 entitled "Coatings and Materials Properties" describes the properties of the different coatings and the sol-gel materials, fibers and powders. The chapter also includes a section dedicated to the characterization techniques especially applied to sol-gel coatings and products.
Download or read book Nondestructive Characterization of Materials IV written by J.F. Bussière and published by Springer Science & Business Media. This book was released on 1992-02-29 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a great deal of interest in extending nondestructive technologies beyond the location and identification of cracks and voids. Specifically there is growing interest in the application of nondestructive evaluation (NOEl to the measurement of physical and mechanical properties of materials. The measurement of materials properties is often referred to as materials characterization; thus nondestructive techniques applied to characterization become nondestructive characterization (NDCl. There are a number of meetings, proceedings and journals focused upon nondestructive technologies and the detection and identification of cracks and voids. However, the series of symposia, of which these proceedings represent the fourth, are the only meetings uniquely focused upon nondestructive characterization. Moreover, these symposia are especially concerned with stimulating communication between the materials, mechanical and manufacturing engineer and the NDE technology oriented engineer and scientist. These symposia recognize that it is the welding of these areas of expertise that is necessary for practical development and application of NDC technology to measurements of components for in service life time and sensor technology for intelligent processing of materials. These proceedings are from the fourth international symposia and are edited by c.o. Ruud, J. F. Bussiere and R.E. Green, Jr. . The dates, places, etc of the symposia held to date area as follows: Symposia on Nondestructive Methods for TITLE: Material Property Determination DATES: April 6-8, 1983 PLACE: Hershey, PA, USA CHAIRPERSONS: C.O. Ruud and R.E. Green, Jr.
Download or read book Ceramic Abstracts written by and published by . This book was released on 2000 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sol Gel Processing and Applications written by Y.A. Attia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: During my professional career, I developed a strong interest in sol-gel technology, and worked on both xerogel and aerogel systems. My fascination with aerogels has driven me to explore their commercial potential, which is currently an important component of my company's business plan. Together with my co-workers, I have also worked on the preparation of controlled PZT and silica xerogels as well as thin film coatings of metals by the sol-gel technology, These experiences convinced me of the tremendous potentials of this technology. A conviction that is shared by many scientists, engineers, and business leaders around the globe. Many sol-gel derived products are already articles of commerce. However, to expand the commercial potential of sol-gel technology, two challenges must be met: (1) the quality of sol-gel derived products must continue to meet or exceed the quality of competing products, (2) the production cost of sol-gel products (specially aerogels) must continued to decline. A key to lowering the costs of sol-gel products is finding inexpensive precursors.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1995 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalyst Characterization written by Boris Imelik and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt: to the Fundamental and Applied Catalysis Series Catalysis is important academically and industrially. It plays an essential role in the manufacture of a wide range of products, from gasoline and plastics to fertilizers and herbicides, which would otherwise be unobtainable or prohibitive ly expensive. There are few chemical-or oil-based material items in modern society that do not depend in some way on a catalytic stage in their manufacture. Apart from manufacturing processes, catalysis is finding other important and over-increasing uses; for example, successful applications of catalysis in the control ofpollution and its use in environmental control are certain to in crease in the future. The commercial import an ce of catalysis and the diverse intellectual challenges of catalytic phenomena have stimulated study by a broad spectrum of scientists including chemists, physicists, chemical engineers, and material scientists. Increasing research activity over the years has brought deeper levels of understanding, and these have been associated with a continually growing amount of published material. As recentlyas sixty years ago, Rideal and Taylor could still treat the subject comprehensively in a single volume, but by the 19 50s Emmett required six volumes, and no conventional multivolume text could now cover the whole of catalysis in any depth.
Download or read book Methods for Geochemical Analysis written by Philip A. Baedecker and published by . This book was released on 1987 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analytical methods used in the Geologic Division laboratories of the U.S. Geological Survey for the inorganic chemical analysis of rock and mineral samples.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1975 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Fast Ion Transport in Solids written by B. Scrosati and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main motivation for the organization of the Advanced Research Workshop in Belgirate was the promotion of discussions on the most recent issues and the future perspectives in the field of Solid State lonics. The location was chosen on purpose since Belgirate was the place were twenty years ago, also then under the sponsorship of NATO, the very first international meeting on this important and interdisciplinary field took place. That meeting was named "Fast Ion Transport in Solids" and gathered virtually everybody at that time having been active in any aspect of motion of ions in solids. The original Belgirate Meeting made for the first time visible the technological potential related to the phenomenon of the fast ionic transport in solids and, accordingly, the field was given the name "Solid State lonics". This field is now expanded to cover a wide range of technologies which includes chemical sensors for environmental and process control, electrochromic windows, mirrors and displays, fuel cells, high performance rechargeable batteries for stationary applications and electrotraction, chemotronics, semiconductor ionics, water electrolysis cells for hydrogen economy and other applications. The main idea for holding an anniversary meeting was that of discussing the most recent issues and the future perspectives of Solid State lonics just twenty years after it has started at the same location on the lake Maggiore in North Italy.
Download or read book Nanostructures And Nanomaterials Synthesis Properties And Applications 2nd Edition written by Guozhong Cao and published by World Scientific Publishing Company. This book was released on 2011-01-03 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the 2nd edition of the original “Nanostructures and Nanomaterials” written by Guozhong Cao and published by Imperial College Press in 2004.This important book focuses not only on the synthesis and fabrication of nanostructures and nanomaterials, but also includes properties and applications of nanostructures and nanomaterials, particularly inorganic nanomaterials. It provides balanced and comprehensive coverage of the fundamentals and processing techniques with regard to synthesis, characterization, properties, and applications of nanostructures and nanomaterials. Both chemical processing and lithographic techniques are presented in a systematic and coherent manner for the synthesis and fabrication of 0-D, 1-D, and 2-D nanostructures, as well as special nanomaterials such as carbon nanotubes and ordered mesoporous oxides. The book will serve as a general introduction to nanomaterials and nanotechnology for teaching and self-study purposes.
Download or read book Lunar Science A Post Apollo View written by Stuart Ross Taylor and published by Elsevier. This book was released on 2016-06-06 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lunar Science: A Post-Apollo View: Scientific Results and Insights from the Lunar Samples explains the scientific results and discoveries of the manned Apollo lunar missions as they are understood. The emphasis is less on sample description and data and more on the interpretative aspects of the study, with the aim of providing a coherent story of the evolution of the moon and its origin as revealed by the lunar samples and the Apollo missions. This text has seven chapters; the first of which provides a historical background of efforts to study the moon prior to the Apollo missions, including lunar photogeologic mapping and direct exploration by spacecraft. Attention then turns to the Apollo missions and the lunar samples collected, beginning with Apollo 11 that landed on the moon on July 20, 1969 and followed by more missions. The next chapter describes the geology of the moon, with emphasis on craters, central peaks and peak rings, the large ringed basins, rilles, and maria lava flows. The reader is also introduced to the nature of the lunar surface material, the maria basalts, the highlands, and the moon's interior. This book concludes with a discussion on the evidence that has been gathered by the Apollo missions that offers insights into the origin and evolution of the moon. An epilogue reflects on the usefulness of manned space flight. This book will appeal to lunar scientists as well as to those with an interest in astronomy and space exploration.
Download or read book Thermochemistry of Alloys written by H. Brodowsky and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: The thermochemistry of alloys has interested generations of scientists and the subject was treated in classical textbooks long ago, e.g. by Hume-Rothery, by Wagner, and by Kubaschewski and Alcock. Nevertheless, the appearance of new materials and the desire to improve traditional materials and metallurgical processes has kept up demand for more information on the thermodynamics of these systems. The advent of computing power has created new opportunities to tie various aspects and properties together, such as phase diagrams and thermodynamic functions, that are in principle thermodynamically inter related but were too cumbersome to work out before. The computer has also been a powerful tool in buUding and testing models that help to explain the underlying causes of non-ideal behavior. At the same time, these calculations have pinpointed areas, where additional and more accurate data are needed. In the laboratory, new methods, improved materials, and sophistica ted instrumentation have gradually changed the way in which experiments are done. Within the time span of perhaps thirty years, the development went from jotting down individual readings of data points to strip chart recording to automatic digital data acquisition. Scholars and students active in the field of "Thermochemistry of Alloys" convened for a NATO Advanced Study Institute at Kiel in August 1987 to discuss these developments. This book collects most of the lectures and seminar papers given at the Institute.
Download or read book Combustion for Material Synthesis written by Alexander S. Rogachev and published by CRC Press. This book was released on 2014-12-15 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the state of the art in combustion synthesis of advanced materials. It is a first attempt to summarize and critically review in one monograph the mechanisms of combustion and product structure formation for a variety of systems, including nanosystems. The authors discuss a wide range of topics including phenomenology, theory, and modern in-situ experimental approaches to investigate the heterogeneous self-sustained reactions, as well as properties of the product synthesized, and methods for large-scale materials production.
Download or read book Functionally Graded Materials written by Y. Miyamoto and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seven years have elapsed since Dr. Renee Ford, editor-in-chief of Materials Technology, first suggested to me to publish a book on Functionally Graded Materials (FGMs). She said that the FGM concept, then largely unknown outside of Japan and a relatively few laboratories elsewhere, would be of great interest to everyone working in the materials field because of its potentially universal applicability. There was no book about FGMs in English at that time, although the number of research papers, review articles, and FGM conference proceedings had been increasing yearly. We discussed what the book should cover, and decided it should present a comprehensive description from basic theory to the most recent applications of FGMs. This would make it useful both as an introduction to FGMs for those simply curious about what this new materials field was all about, and also as a textbook for researchers, engineers, and graduate students in various material fields. The FGM Forum in Japan generously offered to support this publication program. is very difficult for an individual author to write a book that Because it covers such a wide range of various aspects of many different materials, I invited more than 30 eminent materials scientists throughout the world, who were associated with FGM research, to contribute selected topics. I also asked several leading researchers in this field to edit selected chapters: Dr. Barry H. Rabin, then at the U. S.
Download or read book Crystal Growth written by C. H. L. Goodman and published by Springer. This book was released on 2013-04-17 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade or so the growth of single crystals has assumed enormous importance for both academic research, and technology (particu larly in the field of 'electronics'). The range of fields involved is great: from electro-optics to metal corrosion, from semiconductors to magnetic bubble materials-one can add to the list almost indefinitely. However, while the general principles of crystal growth can be applied aImost right across the board, it turns out that the precise way in which one can grow a particular crystal best varies considerably from material to material. This, of course, is to emphasise the obvious; nonetheless, except in specialised papers in the scientific litera ture , little attempt seems to have been made to deal in any detail with the causes of the difficulties in growing particular kinds of materials and with methods of circumventing them. These specialised papers may be inaccessible, and in any case cannot be, usually, very broad in scope or detailed in treatment simply because of the pressure to keep papers short. And unfortunately few specialised monographs seem to have been produced. These points and others similar emerged repeatedly in discussions with crystal growers from aU parts of the World and indicated that there was a need for a publication which would deal in detail with problems and techniques for specialised areas of crystal growth.
Download or read book Nanoelectronic Materials written by Loutfy H. Madkour and published by Springer. This book was released on 2019-06-27 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents synthesis techniques for the preparation of low-dimensional nanomaterials including 0D (quantum dots), 1D (nanowires, nanotubes) and 2D (thin films, few layers), as well as their potential applications in nanoelectronic systems. It focuses on the size effects involved in the transition from bulk materials to nanomaterials; the electronic properties of nanoscale devices; and different classes of nanomaterials from microelectronics to nanoelectronics, to molecular electronics. Furthermore, it demonstrates the structural stability, physical, chemical, magnetic, optical, electrical, thermal, electronic and mechanical properties of the nanomaterials. Subsequent chapters address their characterization, fabrication techniques from lab-scale to mass production, and functionality. In turn, the book considers the environmental impact of nanotechnology and novel applications in the mechanical industries, energy harvesting, clean energy, manufacturing materials, electronics, transistors, health and medical therapy. In closing, it addresses the combination of biological systems with nanoelectronics and highlights examples of nanoelectronic–cell interfaces and other advanced medical applications. The book answers the following questions: • What is different at the nanoscale? • What is new about nanoscience? • What are nanomaterials (NMs)? • What are the fundamental issues in nanomaterials? • Where are nanomaterials found? • What nanomaterials exist in nature? • What is the importance of NMs in our lives? • Why so much interest in nanomaterials? • What is at nanoscale in nanomaterials? • What is graphene? • Are pure low-dimensional systems interesting and worth pursuing? • Are nanotechnology products currently available? • What are sensors? • How can Artificial Intelligence (AI) and nanotechnology work together? • What are the recent advances in nanoelectronic materials? • What are the latest applications of NMs?
