Download or read book Convective Heat and Mass Transfer in Rotating Disk Systems written by Igor V. Shevchuk and published by Springer Science & Business Media. This book was released on 2009-12-01 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is devoted to investigation of a series of problems of convective heat and mass transfer in rotating-disk systems. Such systems are widespread in scienti?c and engineering applications. As examples from the practical area, one can mention gas turbine and computer engineering, disk brakes of automobiles, rotating-disk air cleaners, systems of microclimate, extractors, dispensers of liquids, evaporators, c- cular saws, medical equipment, food process engineering, etc. Among the scienti?c applications, it is necessary to point out rotating-disk electrodes used for experim- tal determination of the diffusion coef?cient in electrolytes. The system consisting of a ?xed disk and a rotating cone that touches the disk by its vertex is widely used for measurement of the viscosity coef?cient of liquids. For time being, large volume of experimental and computational data on par- eters of ?uid ?ow, heat and mass transfer in different types of rotating-disk systems have been accumulated, and different theoretical approaches to their simulation have been developed. This obviously causes a need of systematization and generalization of these data in a book form.

Download or read book Modelling of Convective Heat and Mass Transfer in Rotating Flows written by Igor V. Shevchuk and published by Springer. This book was released on 2015-07-24 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents results of the analytical and numerical modeling of convective heat and mass transfer in different rotating flows caused by (i) system rotation, (ii) swirl flows due to swirl generators, and (iii) surface curvature in turns and bends. Volume forces (i.e. centrifugal and Coriolis forces), which influence the flow pattern, emerge in all of these rotating flows. The main part of this work deals with rotating flows caused by system rotation, which includes several rotating-disk configurations and straight pipes rotating about a parallel axis. Swirl flows are studied in some of the configurations mentioned above. Curvilinear flows are investigated in different geometries of two-pass ribbed and smooth channels with 180° bends. The author demonstrates that the complex phenomena of fluid flow and convective heat transfer in rotating flows can be successfully simulated using not only the universal CFD methodology, but in certain cases by means of the integral methods, self-similar and analytical solutions. The book will be a valuable read for research experts and practitioners in the field of heat and mass transfer.

Download or read book Handbook of Thermal Science and Engineering written by and published by Springer. This book was released on 2018-07-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook provides researchers, faculty, design engineers in industrial R&D, and practicing engineers in the field concise treatments of advanced and more-recently established topics in thermal science and engineering, with an important emphasis on micro- and nanosystems, not covered in earlier references on applied thermal science, heat transfer or relevant aspects of mechanical/chemical engineering. Major sections address new developments in heat transfer, transport phenomena, single- and multiphase flows with energy transfer, thermal-bioengineering, thermal radiation, combined mode heat transfer, coupled heat and mass transfer, and energy systems. Energy transport at the macro-scale and micro/nano-scales is also included. The internationally recognized team of authors adopt a consistent and systematic approach and writing style, including ample cross reference among topics, offering readers a user-friendly knowledgebase greater than the sum of its parts, perfect for frequent consultation. The Handbook of Thermal Science and Engineering is ideal for academic and professional readers in the traditional and emerging areas of mechanical engineering, chemical engineering, aerospace engineering, bioengineering, electronics fabrication, energy, and manufacturing concerned with the influence thermal phenomena.

Download or read book Fundamentals of Heat and Mass Transfer written by C. P. Kothandaraman and published by New Age International. This book was released on 2006 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: About the Book: Salient features: A number of Complex problems along with the solutions are provided Objective type questions for self-evaluation and better understanding of the subject Problems related to the practical aspects of the subject have been worked out Checking the authenticity of dimensional homogeneity in case of all derived equations Validation of numerical solutions by cross checking Plenty of graded exercise problems from simple to complex situations are included Variety of questions have been included for the clear grasping of the basic principles Redrawing of all the figures for more clarity and understanding Radiation shape factor charts and Heisler charts have also been included Essential tables are included The basic topics have been elaborately discussed Presented in a more better and fresher way Contents: An Overview of Heat Transfer Steady State Conduction Conduction with Heat Generation Heat Transfer with Extended Surfaces (FINS) Two Dimensional Steady Heat Conduction Transient Heat Conduction Convection Convective Heat Transfer Practical Correlation Flow Over Surfaces Forced Convection Natural Convection Phase Change Processes Boiling, Condensation, Freezing and Melting Heat Exchangers Thermal Radiation Mass Transfer

Download or read book Fluid Mechanics Heat Transfer and Mass Transfer written by K. S. Raju and published by John Wiley & Sons. This book was released on 2011-04-20 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This broad-based book covers the three major areas of Chemical Engineering. Most of the books in the market involve one of the individual areas, namely, Fluid Mechanics, Heat Transfer or Mass Transfer, rather than all the three. This book presents this material in a single source. This avoids the user having to refer to a number of books to obtain information. Most published books covering all the three areas in a single source emphasize theory rather than practical issues. This book is written with emphasis on practice with brief theoretical concepts in the form of questions and answers, not adopting stereo-typed question-answer approach practiced in certain books in the market, bridging the two areas of theory and practice with respect to the core areas of chemical engineering. Most parts of the book are easily understandable by those who are not experts in the field. Fluid Mechanics chapters include basics on non-Newtonian systems which, for instance find importance in polymer and food processing, flow through piping, flow measurement, pumps, mixing technology and fluidization and two phase flow. For example it covers types of pumps and valves, membranes and areas of their use, different equipment commonly used in chemical industry and their merits and drawbacks. Heat Transfer chapters cover the basics involved in conduction, convection and radiation, with emphasis on insulation, heat exchangers, evaporators, condensers, reboilers and fired heaters. Design methods, performance, operational issues and maintenance problems are highlighted. Topics such as heat pipes, heat pumps, heat tracing, steam traps, refrigeration, cooling of electronic devices, NOx control find place in the book. Mass transfer chapters cover basics such as diffusion, theories, analogies, mass transfer coefficients and mass transfer with chemical reaction, equipment such as tray and packed columns, column internals including structural packings, design, operational and installation issues, drums and separators are discussed in good detail. Absorption, distillation, extraction and leaching with applications and design methods, including emerging practices involving Divided Wall and Petluk column arrangements, multicomponent separations, supercritical solvent extraction find place in the book.

Download or read book Rotor stator Spinning Disc Reactor written by Marco Meeuwse and published by . This book was released on 2011 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Studies of Thermal Convection in a Rotating Cylinder with Some Implications for Large Scale Atmospheric Motions written by Dave Fultz and published by Springer. This book was released on 2016-06-27 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objects of the American Meteorological Society are "the development and dissemination of knowledge of meteorology in all its phases and applications, and the advancement of its professional ideals." The organization of the Society took place in affiliation with the American Association for the Advancement of Science at Saint Louis, Missouri, December 29, 1919, and its incorporation, at Washington, D. C., January 21, 1920. The work of the Society is carried on by the Bulletin, the Journal, and Meteorological Monographs, by papers and discussions at meetings of the Society, through the offices of the Secretary and the Executive Secretary, and by correspondence. All of the Americas are represented in the membership of the Society as well as many foreign countries.

Download or read book Flow and Heat Transfer in Rotating disc Systems written by John Michael Owen and published by . This book was released on 1989 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discussing fluid mechanics and heat transfer in rotating-disc systems, this text simplifies and extends existing information to provide a basic understanding of the subject. Physical insight, mathematical models and experimental data are used to explain the flow structure and provide theoretical methods and correlations which will be of use to research workers and designers.

Download or read book Flow and Heat or Mass Transfer in the Chemical Process Industry written by Dimitrios V. Papavassiliou and published by MDPI. This book was released on 2018-09-28 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Flow and Heat or Mass Transfer in the Chemical Process Industry" that was published in Fluids

Download or read book Physical and Computational Aspects of Convective Heat Transfer written by T. Cebeci and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is concerned with the transport of thermal energy in flows of practical significance. The temperature distributions which result from convective heat transfer, in contrast to those associated with radiation heat transfer and conduction in solids, are related to velocity characteristics and we have included sufficient information of momentum transfer to make the book self-contained. This is readily achieved because of the close relation ship between the equations which represent conservation of momentum and energy: it is very desirable since convective heat transfer involves flows with large temperature differences, where the equations are coupled through an equation of state, as well as flows with small temperature differences where the energy equation is dependent on the momentum equation but the momentum equation is assumed independent of the energy equation. The equations which represent the conservation of scalar properties, including thermal energy, species concentration and particle number density can be identical in form and solutions obtained in terms of one dependent variable can represent those of another. Thus, although the discussion and arguments of this book are expressed in terms of heat transfer, they are relevant to problems of mass and particle transport. Care is required, however, in making use of these analogies since, for example, identical boundary conditions are not usually achieved in practice and mass transfer can involve more than one dependent variable.

Download or read book Rotating Flow written by Peter Childs and published by Elsevier. This book was released on 2010-10-29 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotating flow is critically important across a wide range of scientific, engineering and product applications, providing design and modeling capability for diverse products such as jet engines, pumps and vacuum cleaners, as well as geophysical flows.Developed over the course of 20 years' research into rotating fluids and associated heat transfer at the University of Sussex Thermo-Fluid Mechanics Research Centre (TFMRC), Rotating Flow is an indispensable reference and resource for all those working within the gas turbine and rotating machinery industries.Traditional fluid and flow dynamics titles offer the essential background but generally include very sparse coverage of rotating flows—which is where this book comes in. Beginning with an accessible introduction to rotating flow, recognized expert Peter Childs takes you through fundamental equations, vorticity and vortices, rotating disc flow, flow around rotating cylinders and flow in rotating cavities, with an introduction to atmospheric and oceanic circulations included to help deepen understanding.Whilst competing resources are weighed down with complex mathematics, this book focuses on the essential equations and provides full workings to take readers step-by-step through the theory so they can concentrate on the practical applications. - A detailed yet accessible introduction to rotating flows, illustrating the differences between flows where rotation is significant and highlighting the non-intuitive nature of rotating flow fields - Written by world-leading authority on rotating flow, Peter Childs, making this a unique and authoritative work - Covers the essential theory behind engineering applications such as rotating discs, cylinders, and cavities, with natural phenomena such as atmospheric and oceanic flows used to explain underlying principles - Provides a rigorous, fully worked mathematical account of rotating flows whilst also including numerous practical examples in daily life to highlight the relevance and prevalence of different flow types - Concise summaries of the results of important research and lists of references included to direct readers to significant further resources

Download or read book Flow and Heat Transfer in Rotating disc Systems written by J. M. Owen and published by . This book was released on 1989 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is devoted to the flow and heat transfer between co-rotating discs, and unifies the subject by means of physical insight and mathematical models, validated using experimental data. Many phenomena, unique to rotating flows, are explained, and empirical correlations and theoretical methods, suitable for design purposes, are presented. Data is provided within the book for validating CFD codes which are being increasingly used to compute the flow in rotating-disc systems. Since the publication of Volume 1 in 1989, there has been an increasing interest in rotating disc systems, mainly from research workers and engine designers concerned with understanding and computing the complex flow and heat transfer that occur inside the internal cooling-systems of gas-turbine engines. This book should be of interest to them as it may assist them in making more efficient use of cooling air systems, resulting in both economic and environmental benefits.

Download or read book Heat Transfer Exercises written by and published by Bookboon. This book was released on with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fundamentals of Momentum Heat and Mass Transfer written by James R. Welty and published by . This book was released on 1976 with total page 828 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanofluid Flow in Porous Media written by Mohsen Sheikholeslami Kandelousi and published by BoD – Books on Demand. This book was released on 2020-08-19 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies of fluid flow and heat transfer in a porous medium have been the subject of continuous interest for the past several decades because of the wide range of applications, such as geothermal systems, drying technologies, production of thermal isolators, control of pollutant spread in groundwater, insulation of buildings, solar power collectors, design of nuclear reactors, and compact heat exchangers, etc. There are several models for simulating porous media such as the Darcy model, Non-Darcy model, and non-equilibrium model. In porous media applications, such as the environmental impact of buried nuclear heat-generating waste, chemical reactors, thermal energy transport/storage systems, the cooling of electronic devices, etc., a temperature discrepancy between the solid matrix and the saturating fluid has been observed and recognized.

Download or read book Application of Control Volume Based Finite Element Method CVFEM for Nanofluid Flow and Heat Transfer written by Mohsen Sheikholeslami and published by Elsevier. This book was released on 2018-09-14 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Application of Control Volume Based Finite Element Method (CVFEM) for Nanofluid Flow and Heat Transfer discusses this powerful numerical method that uses the advantages of both finite volume and finite element methods for the simulation of multi-physics problems in complex geometries, along with its applications in heat transfer and nanofluid flow. The book applies these methods to solve various applications of nanofluid in heat transfer enhancement. Topics covered include magnetohydrodynamic flow, electrohydrodynamic flow and heat transfer, melting heat transfer, and nanofluid flow in porous media, all of which are demonstrated with case studies. This is an important research reference that will help readers understand the principles and applications of this novel method for the analysis of nanofluid behavior in a range of external forces. - Explains governing equations for nanofluid as working fluid - Includes several CVFEM codes for use in nanofluid flow analysis - Shows how external forces such as electric fields and magnetic field effects nanofluid flow

Download or read book Entropy Generation Minimization written by Adrian Bejan and published by CRC Press. This book was released on 2013-10-29 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the diverse and rapidly expanding field of Entropy Generation Minimization (EGM), the method of thermodynamic optimization of real devices. The underlying principles of the EGM method - also referred to as "thermodynamic optimization," "thermodynamic design," and "finite time thermodynamics" - are thoroughly discussed, and the me