Download or read book Fischer Tropsch Technology written by André Steynberg and published by Elsevier. This book was released on 2004-10-30 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fischer-Tropsch Technology is a unique book for its state-of-the-art approach to Fischer Tropsch (FT) technology. This book provides an explanation of the basic principles and terminology that are required to understand the application of FT technology. It also contains comprehensive references to patents and previous publications. As the first publication to focus on theory and application, it is a contemporary reference source for students studying chemistry and chemical engineering. Researchers and engineers active in the development of FT technology will also find this book an invaluable source of information. * Is the first publication to cover the theory and application for modern Fischer Tropsch technology * Contains comprehensive knowledge on all aspects relevant to the application of Fischer Tropsch technology* No other publication looks at past, present and future applications

Download or read book Natural Gas Conversion V written by A. Parmaliana and published by Elsevier. This book was released on 1998-09-17 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: On January 1988, the ascertained and economically accessible reserves of Natural Gas (NG) amounted to over 144,000 billion cubic meters worldwide, corresponding to 124 billion tons of oil equivalents (comparable with the liquid oil reserves, which are estimated to be 138 billion TOE). It is hypothesized that the volume of NG reserve will continue to grow at the same rate of the last decade. Forecasts on production indicate a potential increase from about 2,000 billion cubic meters in 1990 to not more than 3,300 billion cubic meters in 2010, even in a high economic development scenario. NG consumption represents only one half of oil: 1.9 billion TOE/y as compared to 3.5 of oil. Consequently, in the future gas will exceed oil as a carbon atom source. In the future the potential for getting energetic vectors or petrochemicals from NG will continue to grow.The topics covered in Natural Gas Conversion V reflect the large global R&D effort to look for new and economic ways of NG exploitation. These range from the direct conversion of methane and light paraffins to the indirect conversion through synthesis gas to fuels and chemicals. Particularly underlined and visible are the technologies already commercially viable.These proceedings prove that mature and technologically feasible processes for natural gas conversion are already available and that new and improved catalytic approaches are currently developing, the validity and feasibility of which will soon be documented. This is an exciting area of modern catalysis, which will certainly open novel and rewarding perspectives for the chemical, energy and petrochemical industries.

Download or read book Advances in Hydrogen Production Storage and Distribution written by Adolfo Iulianelli and published by Elsevier. This book was released on 2014-07-16 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Hydrogen Production, Storage and Distribution reviews recent developments in this key component of the emerging "hydrogen economy," an energy infrastructure based on hydrogen. Since hydrogen can be produced without using fossil fuels, a move to such an economy has the potential to reduce greenhouse gas emissions and improve energy security. However, such a move also requires the advanced production, storage and usage techniques discussed in this book. Part one introduces the fundamentals of hydrogen production, storage, and distribution, including an overview of the development of the necessary infrastructure, an analysis of the potential environmental benefits, and a review of some important hydrogen production technologies in conventional, bio-based, and nuclear power plants. Part two focuses on hydrogen production from renewable resources, and includes chapters outlining the production of hydrogen through water electrolysis, photocatalysis, and bioengineered algae. Finally, part three covers hydrogen production using inorganic membrane reactors, the storage of hydrogen, fuel cell technology, and the potential of hydrogen as a fuel for transportation. Advances in Hydrogen Production, Storage and Distribution provides a detailed overview of the components and challenges of a hydrogen economy. This book is an invaluable resource for research and development professionals in the energy industry, as well as academics with an interest in this important subject. - Reviews developments and research in this dynamic area - Discusses the challenges of creating an infrastructure to store and distribute hydrogen - Reviews the production of hydrogen using electrolysis and photo-catalytic methods

Download or read book Fischer Tropsch Synthesis Catalysts and Catalysis written by Burtron H. Davis and published by CRC Press. This book was released on 2016-04-06 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on a symposium held during the 248th American Chemical Society meeting that focused on use of the Fischer-Tropsch process in producing synthetic fuels. Its contents reflect the four dominant subjects of the meeting: catalyst preparation and activation, catalyst activity and reaction mechanisms, catalyst characterization and related reactions, and topics concerning commercializing the Fischer-Tropsch process. It covers recent developments related to renewable resources and green energy and provides a glimpse of the commercial potential of the Fischer-Tropsch process in synthetic fuel production.

Download or read book The Chemistry of the Catalyzed Hydrogenation of Carbon Monoxide written by G. Henrici-Olive and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the oil embargo, in the winter 1973174, parts of Western Europe present ed an almost war-like aspect on Saturdays and Sundays: no traffic on the high ways, no crowds at ski resorts and other weekend entertainment places, no gaso line at the pumps. Living and teaching then in that part of the world, and discussing the situa tion with our students, we came to the conclusion that it would be timely to col lect the fine chemistry already known at the time in the field of conversion of coal to gasoline and other chemicals, and by this way help to draw the attention to this important alternative to crude oil. The idea of this book was born. The energy shock of the early seventies has been healthy and of great conse quences in chemistry. Large amounts of research money have been put to work since, and our knowledge of the possibilities and limitations of coal-based chemistry has increased enormously. During several years it appeared inap propriate to write a monograph about a topic which was in the midst of such an impetuous development. Nevertheless, we collected, and critically selected, the upcoming work as it appeared in the literature, and also tried to provide some modest input ourselves. Now, ten years later, the situation seems to be settled to a certain degree.

Download or read book Catalysis in the Refining of Fischer Tropsch Syncrude written by Arno de Klerk and published by Royal Society of Chemistry. This book was released on 2010 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to provide a review of the literature on the catalysis needed to refine syncrude to transportation fuels.

Download or read book Fischer Tropsch Refining written by Arno de Klerk and published by John Wiley & Sons. This book was released on 2012-12-21 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fischer-Tropsch process is gaining recognition again due to the world-wide increase in energy needs and decrease in oil availability. The increasing interest in utilizing biomass as a potential renewable feedstock in energy generation is further supporting this development. The book covers the production and refining of Fischer-Tropsch syncrude to fuels and chemicals systematically and comprehensively, presenting a wealth of new knowledge and material. As such, it deals extensively with aspects of engineering, chemistry and catalysis. This handbook and ready reference adopts a fundamental approach, looking at the molecules and their transformation from feed to product. Numerous examples illustrate the possibilities and limitations of Fischer-Tropsch syncrude as feesdstock. Of great interest to everyone interested in refining - not just Fischer-Tropsch specialists. From the Contents: Fischer-Tropsch Facilities and Refineries at a Glance Production of Fischer-Tropsch Syncrude Industrial Fischer-Tropsch Facilities Synthetic Transportation Fuels Refining Technology Refinery Design

Download or read book Natural Gas Conversion VI written by T.H. Fleisch and published by Elsevier. This book was released on 2001-06-01 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 6th Natural Gas Conversion Sumposium held in Alaska in June 2001. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings.The 6th Natural Gas Conversion Symposium is conducted under the overall direction of the Organizing Committee. The Program Committee was responsible for the review, selection, editing of most of the manuscripts included in this volum. A standing International Advisory Board has ensured the effective long-term planning and the continuity and technical excellence of these meetings.

Download or read book Fundamentals of Petroleum Refining written by Mohamed A. Fahim and published by Elsevier. This book was released on 2009-11-19 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Petroleum Refining presents the fundamentals of thermodynamics and kinetics, and it explains the scientific background essential for understanding refinery operations. The text also provides a detailed introduction to refinery engineering topics, ranging from the basic principles and unit operations to overall refinery economics. The book covers important topics, such as clean fuels, gasification, biofuels, and environmental impact of refining, which are not commonly discussed in most refinery textbooks. Throughout the source, problem sets and examples are given to help the reader practice and apply the fundamental principles of refining. Chapters 1-10 can be used as core materials for teaching undergraduate courses. The first two chapters present an introduction to the petroleum refining industry and then focus on feedstocks and products. Thermophysical properties of crude oils and petroleum fractions, including processes of atmospheric and vacuum distillations, are discussed in Chapters 3 and 4. Conversion processes, product blending, and alkylation are covered in chapters 5-10. The remaining chapters discuss hydrogen production, clean fuel production, refining economics and safety, acid gas treatment and removal, and methods for environmental and effluent treatments. This source can serve both professionals and students (on undergraduate and graduate levels) of Chemical and Petroleum Engineering, Chemistry, and Chemical Technology. Beginners in the engineering field, specifically in the oil and gas industry, may also find this book invaluable. - Provides balanced coverage of fundamental and operational topics - Includes spreadsheets and process simulators for showing trends and simulation case studies - Relates processing to planning and management to give an integrated picture of refining

Download or read book Iron and Cobalt Catalysts written by Wilson D. Shafer and published by MDPI. This book was released on 2020-06-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the turn of the last century when the field of catalysis was born, iron and cobalt have been key players in numerous catalysis processes. These metals, due to their ability to activate CO and CH, haev a major economic impact worldwide. Several industrial processes and synthetic routes use these metals: biomass-to-liquids (BTL), coal-to-liquids (CTL), natural gas-to-liquids (GTL), water-gas-shift, alcohol synthesis, alcohol steam reforming, polymerization processes, cross-coupling reactions, and photocatalyst activated reactions. A vast number of materials are produced from these processes, including oil, lubricants, waxes, diesel and jet fuels, hydrogen (e.g., fuel cell applications), gasoline, rubbers, plastics, alcohols, pharmaceuticals, agrochemicals, feed-stock chemicals, and other alternative materials. However, given the true complexities of the variables involved in these processes, many key mechanistic issues are still not fully defined or understood. This Special Issue of Catalysis will be a collaborative effort to combine current catalysis research on these metals from experimental and theoretical perspectives on both heterogeneous and homogeneous catalysts. We welcome contributions from the catalysis community on catalyst characterization, kinetics, reaction mechanism, reactor development, theoretical modeling, and surface science.

Download or read book The Chemistry of Hydrocarbon Fuels written by Harold H. Schobert and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Chemistry of Hydrocarbon Fuels is concerned with the chemical aspects of hydrofuels such as coal, petroleum, and natural gas. Topics covered include diagenesis and catagenesis, processing of natural gas and petroleum fractions, coal combustion, and chemicals that can be obtained from fuels. This book is comprised of 14 chapters and begins with a comprehensive treatment of the formation of fuels from accumulated organic matter, along with the organic geochemistry of coal, oil, and gas. The following chapters focus on the composition of hydrocarbon fuels and some of their important physical properties. Production and use of synthesis gas, alternate fuels from coal, and oxygenated fuels are considered. The remaining chapters deal with some of the chemistry of separation, refining, and use of hydrocarbon fuels. This monograph is written primarily for practicing scientists and engineers, fuel scientists, petroleum chemists, and those who are new to the field of fuel science and seek an introduction to fuel chemistry.

Download or read book The Fischer Tropsch Synthesis written by Robert Bernard Anderson and published by . This book was released on 1984 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydrocarbon Biorefinery written by Sunil Kumar Maity and published by Elsevier. This book was released on 2021-09-02 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable production of hydrocarbon biofuels from biomass, fuels that are fully compatible with existing internal combustion engines, will allow the global transport economy to transition to a sustainable energy source without the need for capital-intensive new infrastructures. Hydrocarbon Biorefinery: Sustainable Processing of Biomass for Hydrocarbon Biofuels presents a comprehensive and easy to understand consolidation of existing knowledge for the production of hydrocarbon biofuels from biomass. Three major areas for the conversion of biomass to hydrocarbon biofuels are addressed: i) Chemical and thermochemical conversion processes, ii) Biological and biochemical conversion processes, and iii) Conversion processes of biomass-derived compounds. Additionally, the book includes process design, life cycle analysis of various processes, reaction engineering, catalysts, process conditions and process concepts, and is supported with detailed case studies. The economic viability of each process is specifically addressed to provide a clear guide for the economic development of future hydrocarbon biofuels. Hydrocarbon Biorefinery: Sustainable Processing of Biomass for Hydrocarbon Biofuels offers an all-in-one resource for researchers, graduate students, and industry professionals working in the area of bioenergy and will be of interest to energy engineers, chemical engineers, bioengineers, chemists, agricultural researchers, and mechanical engineers. Furthermore, this book provides structured foundational content on biorefineries for undergraduate and graduate students. - Presents fundamental concepts and processes of hydrocarbon biofuel production, covering chemical, biological, and biomass-derived conversion processes - Synthesizes the state-of-the-art research and commercial initiatives of this emerging concept into stand-alone chapters, serving as a structured resource for researchers and practitioners - Emphasizes the process design and economic feasibility of each process using life cycle assessments to support commercial development

Download or read book Advances in Renewable Hydrogen and Other Sustainable Energy Carriers written by Abdallah Khellaf and published by Springer Nature. This book was released on 2020-08-19 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines a broad range of advances in hydrogen energy and alternative fuel developments and their role in the energy transition. The respective contributions were presented at the International Symposium on Sustainable Hydrogen, held in Algiers, Algeria on November 27-28, 2019. The transition from non-renewable polluting energy to sustainable green energy requires not only new energy sources but also new storage techniques and smart energy management. This situation has sparked renewed interest in hydrogen and alternative fuels, as they could help meet these needs. Indeed, hydrogen can not only be used as a clean energy vector or as an alternative fuel, but also as a storage medium or as an intermediary that enables improved energy management. This text offers a valuable reference guide for those working in the professional energy sector, as well as for students and instructors in academia who want to learn about the state of the art and future directions in the fields of hydrogen energy, alternative fuels and sustainable energy development.

Download or read book The Refinery of the Future written by James G. Speight and published by William Andrew. This book was released on 2010-12-21 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: As feedstocks to refineries change, there must be an accompanying change in refinery technology. This means a movement from conventional means of refining heavy feedstocks using (typically) coking technologies to more innovative processes that will coax the last drips of liquid fuels from the feedstock. This book presents the evolution of refinery processes during the last century and as well as the means by which refinery processes will evolve during the next three-to-five decades. Chapters contain material relevant to (1) comparisons of current feedstocks with heavy oil and bio-feedstocks; (2) evolution of refineries since the 1950s, (3) properties and refinability of heavy oil and bio-feedstocks, (4) thermal processes vs. hydroprocesses, and (5) evolution of products to match the environmental market. Process innovations that have influenced refinery processing over the past three decades are presented, as well as the relevant patents that have the potential for incorporation into future refineries.• Comparison of current feedstocks with heavy oil and bio-feedstocks. • Evolution of refineries over the past three decades. • Properties and refinability of heavy oil and bio-feedstocks. • Thermal processes vs. Hydroprocesses. • Evolution of products to match the environmental market. - Investigates the engineering and plant design challenges presented by heavy oil and bio-feedstocks - Explores the legislatory and regulatory climate, including increasingly stringent environmental requirements - Examines the trade-offs of thermal processes vs. hydroprocesses

Download or read book Greener Fischer Tropsch Processes written by Peter M. Maitlis and published by John Wiley & Sons. This book was released on 2013-01-30 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Greener Fischer-Tropsch Processes How can we use our carbon-based resources in the most responsible manner? How can we most efficiently transform natural gas, coal, or biomass into diesel, jet fuel or gasoline to drive our machines? The Big Questions today are energy-related, and the Fischer-Tropsch process provides industrially tested solutions. This book offers a comprehensive and up-to-date overview of the Fischer-Tropsch process, from the basic science and engineering to commercial issues. It covers industrial, economic, environmental, and fundamental aspects, with a specific focus on “green” concepts such as sustainability, process improvement, waste-reduction, and environmental care. The result is a practical reference for researchers, engineers, and financial analysts working in the energy sector, who are interested in carbon conversion, fuel processing or synthetic fuel technologies. It is also an ideal introductory book on the Fischer-Tropsch process for graduate courses in chemistry and chemical engineering.

Download or read book Petrochemistry written by Martin Bajus and published by John Wiley & Sons. This book was released on 2020-04-06 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive textbook on petrochemical conversion processes for petroleum and natural gas fractions as produced by refinery operations This innovative textbook provides essential links between the chemical sciences and chemical technology, between petrochemistry and hydrocarbon technology. The book brings alive key concepts forming the basis of chemical technology and presents a solid background for innovative process development. In all chapters, the processes described are accompanied by simplified flow schemes, encouraging students to think in terms of conceptual process designs. Petrochemistry: Petrochemical Processing, Hydrocarbon Technology and Green Engineering introduces students to a variety of topics related to the petrochemical industry, hydrocarbon processing, fossil fuel resources, as well as fuels and chemicals conversion. The first chapter covers the fundamentals and principals for designing several of the processes in the book, including discussions on thermodynamics, chemical kinetics, reactor calculations, and industrial catalysts. The following chapters address recent advances in hydrocarbon technology, energy technology, and sources of hydrocarbons. The book then goes on to discuss the petrochemical industry based on four basic pillars, all derived from petroleum and natural gas: Production of lower alkenes; other sources of lower alkenes; petrochemicals from C2-C3 alkenes Production of BTX aromatics; chemicals from BTX aromatics C1 technology Diversification of petrochemicals The growing importance of sustainable technology, process intensification and addressing greenhouse gas emissions is reflected throughout the book. Written for advanced students working in the areas of petrochemistry, hydrocarbon technology, natural gas, energy materials and technologies, alternative fuels, and recycling technologies the book is also a valuable reference for industrial practitioners in the oil and gas industry.