Download or read book U S Japan Workshop on Performance Based Earthquake Engineering Methodology for Reinforced Concrete Building Structures written by Toshimi Kabeyasawa and published by . This book was released on 1999 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fifth International PhD Symposium in Civil Engineering written by Joost Walraven and published by Taylor & Francis US. This book was released on 2004 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Methods for Seismic Performance Evaluation of Building Structures written by Sang Whan Han and published by MDPI. This book was released on 2021-01-21 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Special Issue was created to collect the most recent and novel research on seismic performance evaluation of building structures. This issue includes three important topics on seismic engineering for building structures: (1) seismic design and performance evaluation, (2) structural dynamics, and (3) seismic hazard and risk analysis. To protect building structures from earthquakes, it is necessary to conduct seismic performance evaluations on structures with reliable methods and to retrofit these structures appropriately using the results of the seismic performance evaluation.
Download or read book Computational Methods and Experimental Measurements XIX Earthquake Resistant Engineering Structures XII written by P. De Wilde and published by WIT Press. This book was released on 2019-08-14 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: A collection of research originating from WIT Conferences on Computational Methods and Earthquake Resistant Engineering Structures. In its 19th year the CMEM conference continues to provide highest quality research which forms part 1 of this book. Part 2 includes leading research as presented at the 12th edition of the ERES conference.
Download or read book Design of Reinforced Concrete Buildings for Seismic Performance written by Mark Aschheim and published by CRC Press. This book was released on 2019-04-05 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: The costs of inadequate earthquake engineering are huge, especially for reinforced concrete buildings. This book presents the principles of earthquake-resistant structural engineering, and uses the latest tools and techniques to give practical design guidance to address single or multiple seismic performance levels. It presents an elegant, simple and theoretically coherent design framework. Required strength is determined on the basis of an estimated yield displacement and desired limits of system ductility and drift demands. A simple deterministic approach is presented along with its elaboration into a probabilistic treatment that allows for design to limit annual probabilities of failure. The design method allows the seismic force resisting system to be designed on the basis of elastic analysis results, while nonlinear analysis is used for performance verification. Detailing requirements of ACI 318 and Eurocode 8 are presented. Students will benefit from the coverage of seismology, structural dynamics, reinforced concrete, and capacity design approaches, which allows the book to be used as a foundation text in earthquake engineering.
Download or read book Seismic Design Methodologies for the Next Generation of Codes written by P. Fajfar and published by Routledge. This book was released on 2019-09-10 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings, arising from an international workshop, present research results and ideas on issues of importance to seismic risk reduction and the development of future seismic codes.
Download or read book The Second U S Japan Workshop on Performance Based Earthquake Engineering Methodology for Reinforced Concrete Building Structures proceedings written by Toshimi Kabeyasawa and published by . This book was released on 2000 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Design Assessment and Retrofitting of Concrete Buildings written by Michael N. Fardis and published by Springer Science & Business Media. This book was released on 2009-07-25 with total page 757 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the historic first European seismic code, this professional book focuses on seismic design, assessment and retrofitting of concrete buildings, with thorough reference to, and application of, EN-Eurocode 8. Following the publication of EN-Eurocode 8 in 2004-05, 30 countries are now introducing this European standard for seismic design, for application in parallel with existing national standards (till March 2010) and exclusively after that. Eurocode 8 is also expected to influence standards in countries outside Europe, or at the least, to be applied there for important facilities. Owing to the increasing awareness of the threat posed by existing buildings substandard and deficient buildings and the lack of national or international standards for assessment and retrofitting, its impact in that field is expected to be major. Written by the lead person in the development of the EN-Eurocode 8, the present handbook explains the principles and rationale of seismic design according to modern codes and provides thorough guidance for the conceptual seismic design of concrete buildings and their foundations. It examines the experimental behaviour of concrete members under cyclic loading and modelling for design and analysis purposes; it develops the essentials of linear or nonlinear seismic analysis for the purposes of design, assessment and retrofitting (especially using Eurocode 8); and gives detailed guidance for modelling concrete buildings at the member and at the system level. Moreover, readers gain access to overviews of provisions of Eurocode 8, plus an understanding for them on the basis of the simple models of the element behaviour presented in the book. Also examined are the modern trends in performance- and displacement-based seismic assessment of existing buildings, comparing the relevant provisions of Eurocode 8 with those of new US prestandards, and details of the most common and popular seismic retrofitting techniques for concrete buildings and guidance for retrofitting strategies at the system level. Comprehensive walk-through examples of detailed design elucidate the application of Eurocode 8 to common situations in practical design. Examples and case studies of seismic assessment and retrofitting of a few real buildings are also presented. From the reviews: "This is a massive book that has no equal in the published literature, as far as the reviewer knows. It is dense and comprehensive and leaves nothing to chance. It is certainly taxing on the reader and the potential user, but without it, use of Eurocode 8 will be that much more difficult. In short, this is a must-read book for researchers and practitioners in Europe, and of use to readers outside of Europe too. This book will remain an indispensable backup to Eurocode 8 and its existing Designers’ Guide to EN 1998-1 and EN 1998-5 (published in 2005), for many years to come. Congratulations to the author for a very well planned scope and contents, and for a flawless execution of the plan". AMR S. ELNASHAI "The book is an impressive source of information to understand the response of reinforced concrete buildings under seismic loads with the ultimate goal of presenting and explaining the state of the art of seismic design. Underlying the contents of the book is the in-depth knowledge of the author in this field and in particular his extremely important contribution to the development of the European Design Standard EN 1998 - Eurocode 8: Design of structures for earthquake resistance. However, although Eurocode 8 is at the core of the book, many comparisons are made to other design practices, namely from the US and from Japan, thus enriching the contents and interest of the book". EDUARDO C. CARVALHO
Download or read book Improvement of Buildings Structural Quality by New Technologies written by Christian Schauer and published by CRC Press. This book was released on 2005-01-20 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Around 100 scientists from 21 countries contributed to the four years of assembled works contained in this volume. Launched in May 2000, the aims of this cooperative action were: * to develop, combine and disseminate new technical engineering technologies * to improve the quality of urban buildings * to propose new technical solutions to architects and planners * to reduce the disturbance caused by construction in urban areas and improve urban quality of life. This publication is the final report of COST C12, and includes datasheets of key information related to mixed building technology, structural integrity under exception actions, and urban design.
Download or read book Proceedings of Fifth U S Japan Workshop on the Improvement of Building Structural Design and Construction Practices written by and published by . This book was released on 1992 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book National Earthquake Hazards Reduction Program written by United States. Congress. House. Committee on Science. Subcommittee on Basic Research and published by . This book was released on 1997 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Earthquake Engineering for Urban Risk Reduction written by S. Tanvir Wasti and published by Springer Science & Business Media. This book was released on 2006-06-15 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquakes affecting urban areas can lead to catastrophic situations and hazard mitigation requires preparatory measures at all levels. Structural assessment is the diagnosis of the seismic health of buildings. Assessment is the prelude to decisions about rehabilitation or even demolition. The scale of the problem in dense urban settings brings about a need for macro seismic appraisal procedures because large numbers of existing buildings do not conform to the increased requirements of new earthquake codes and specifications or have other deficiencies. It is the vulnerable buildings - liable to cause damage and loss of life - that need immediate attention and urgent appraisal in order to decide if structural rehabilitation and upgrading are feasible. Current economic, efficient and occupant-friendly rehabilitation techniques vary widely and include the application either of precast concrete panels or layers, strips and patches of fiber reinforced polymers (FRP) in strategic locations. The papers in this book, many by renowned authorities in earthquake engineering, chart new and vital directions of research and application in the assessment and rehabilitation of buildings in seismic regions. While several papers discuss the probabilistic prediction and quantification of structural damage, others present approaches related with the in-situ and occupant friendly upgrading of buildings and propose both economical and practical techniques to address the problem.
Download or read book National Earthquake Hazards Reduction Program written by United States. Congress. Senate. Committee on Commerce, Science, and Transportation. Subcommittee on Science, Technology, and Space and published by . This book was released on 1997 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geotechnical Earthquake Engineering written by Steven L. Kramer and published by CRC Press. This book was released on 2024-11-29 with total page 1061 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully updated second edition provides an introduction to geotechnical earthquake engineering for first-year graduate students in geotechnical or earthquake engineering graduate programs with a level of detail that will also be useful for more advanced students as well as researchers and practitioners. It begins with an introduction to seismology and earthquake ground motions, then presents seismic hazard analysis and performance-based earthquake engineering (PBEE) principles. Dynamic soil properties pertinent to earthquake engineering applications are examined, both to facilitate understanding of soil response to seismic loads and to describe their practical measurement as part of site characterization. These topics are followed by site response and its analysis and soil–structure interaction. Ground failure in the form of soil liquefaction, cyclic softening, surface fault rupture, and seismically induced landslides are also addressed, and the book closes with a chapter on soil improvement and hazard mitigation. The first edition has been widely used around the world by geotechnical engineers as well as many seismologists and structural engineers. The main text of this book and the four appendices: • Cover fundamental concepts in applied seismology, geotechnical engineering, and structural dynamics. • Contain numerous references for further reading, allowing for detailed exploration of background or more advanced material. • Present worked example problems that illustrate the application of key concepts emphasized in the text. • Include chapter summaries that emphasize the most important points. • Present concepts of performance-based earthquake engineering with an emphasis on uncertainty and the types of probabilistic analyses needed to implement PBEE in practice. • Present a broad, interdisciplinary narrative, drawing from the fields of seismology, geotechnical engineering, and structural engineering to facilitate holistic understanding of how geotechnical earthquake engineering is applied in seismic hazard and risk analyses and in seismic design.
Download or read book Report written by and published by . This book was released on 2004 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 5th International Conference on Sustainable Civil Engineering Structures and Construction Materials written by Sheila Belayutham and published by Springer Nature. This book was released on 2022-04-06 with total page 1515 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles papers presented during the 5th International Conference on Sustainable Civil Engineering Structures and Construction Materials (SCESCM) held virtually in December 2020. This is the fifth edition of this conference series; the theme for the 5th SCESCM is “Transforming the World, Foster the Sustainable Development Goals (SDGs),” and it focuses on various issues, novel findings, as well as developments in the area of civil and infrastructure, conforming to the SDGs. This book caters to postgraduate students, researchers, and practitioners involved in advocating and embedding sustainability in various phases of design, construction and maintenance of civil engineering structures and infrastructure facilities.
Download or read book Vuln rabilit sismique des constructions written by GUEGEN Philippe and published by Lavoisier. This book was released on 2013-04-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ce ne sont pas les séismes qui tuent mais l’effondrement des constructions. C’est ainsi au génie parasismique, au travers de la réglementation, de concevoir des ouvrages résistants à l’aléa sismique dit réglementaire. Cependant, sachant que ces règles se sont améliorées en même temps que notre connaissance du phénomène naturel et des événements passés, force est de constater que la majorité des centres urbains est composée de bâtiments anciens, conçus selon des concepts et des règles de l’art souvent inadaptés au contexte sismique. Savoir évaluer la vulnérabilité des constructions existantes est donc une étape indispensable à une meilleure gestion du risque sismique et de sa politique de prévention. Après quelques rappels essentiels suivis d’exemples, cet ouvrage décrit des développements récents sur l’évaluation sismique de zones urbaines constituées d’un grand nombre de structures, dans des contextes à sismicité modérée (France, Suisse) ou forte (Italie, Grèce).
