Download or read book The Farinograph Handbook written by Jayne E. Bock and published by Elsevier. This book was released on 2022-05-07 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Farinograph Handbook: Advances in Technology, Science and Applications, Fourth Edition, highlights the instrument's changes over the last three decades. This book outlines how different farinograph models work, how to properly run a standard test and interpret the results, and the standard and unconventional applications for the instrument. This fourth edition will familiarize readers with the farinograph instrument's principles of operation and factors that affect its operation. This edition also contains new research on dough rheology, the use of results for process control in traditional bakery applications, and information on instrument maintenance and calibration. This handbook is ideal for dough rheologists, cereal scientists, food (specifically, bread) scientists, millers, grain developers, academics, researchers and students. - Acts as an authoritative source for information regarding the farinograph and its use - Provides full coverage of the principles governing the instrument, its operation and application of results - Contains a troubleshooting section which addresses common issues encountered with the instrument - Covers information on potential sources of error and how to avoid or control them - Equips the reader to determine when an instrument requires maintenance and/or repair
Download or read book The Farinograph Handbook written by American Association of Cereal Chemists. Physical Testing Methods Committee and published by . This book was released on 1972 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The ICC Handbook of Cereals Flour Dough Product Testing written by Stanley P. Cauvain and published by DEStech Publications, Inc. This book was released on 2009 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an introduction to the techniques and information required for the testing and analysis of cereals throughout the entire grain chain, from breeding through harvesting and storage to processing and the manufacture of cereal-based food products.
Download or read book Food Process Design and Evaluation written by Rakesh K. Singh and published by Routledge. This book was released on 2019-03-04 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides detailed illustrated reports on important recent advances in processing of foods including separation, mixing, preservation, and extrusion. The authors are specialists in food processing from North America and Europe. The reports were originally presented at the Conference of Food Engineering sponsored by the American Institute of Chemical Engineers in 1992 and 1993; they were selected, rewritten and updated for this book.
Download or read book AlveoConsistograph Handbook written by Michel Dubois and published by Elsevier. This book was released on 2016-07-21 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: The AlveoConsistograph helps you to classify, control, and select wheat and flour and to optimize their blending for specific rheological properties. It measures the effects of improvers, ingredients, and other additives, resulting in better control of dough on the production line and more consistent end-product quality. The AlveoConsistograph Handbook, Second Edition provides an understanding of the technical data generated by the instrument and gives timely application examples. It explains the workings of the Chopin Consistograph and provides deep insight into its coupling with the Chopin Alveograph. As the first revision of this resource in 20 years, this new edition explains major modifications and improvements of the alveograph through new and completely revised chapters. A new chapter on the Consistograph, the component used to determine the water absorption capacity of flour, includes test procedures, applications, differences from other devices, maintenance, and troubleshooting. Another new chapter discusses the debate surrounding the testing of samples using either constant water content or constant consistency methods. This chapter gives useful insight into the adapted hydrated alveograph protocol and its benefits for users of flour that will be part of formulations when gluten quality and performance is crucial. It covers the controversial subject in depth, along with the technical basis for the development of the debate, and compares the uses of both methods on the same wheat. In addition to wheat flour, the book provides guidance for using the alveograph on additional products, such as durum wheat semolina and durum pasta. All the chapters have been rewritten to include the latest practices and will help users gain a better understanding of how this important technology is used in today’s food labs. This large-format, easy-to-read handbook includes two helpful appendixes: The first lists the main parts of the alveograph, and the second lists selected references concerning the alveograph. The AlveoConsistograph Handbook will provide users all along the cereal chain with up-to-date information that helps them to get the most out of their daily use of this important technology. The book will be especially useful for food scientists in the baking industry, quality control laboratories, suppliers of enzymes and additives, breeders, grain scientists involved with grain storage, and grain exporters Description of different types of alveographs Theory of the alveograph Description of the alveograph procedure Modification of the alveograph procedure Interpretation of alveograph results Factors influencing the alveograph Alveograph calibration Description of the consistograph Adapted hydration method for the alveograph Troubleshooting
Download or read book Food Engineering Volume III written by Gustavo V. Barbosa-Cánovas and published by EOLSS Publications. This book was released on 2009-08-10 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Engineering is a component of Encyclopedia of Food and Agricultural Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. Food Engineering became an academic discipline in the 1950s. Today it is a professional and scientific multidisciplinary field related to food manufacturing and the practical applications of food science. These volumes cover five main topics: Engineering Properties of Foods; Thermodynamics in Food Engineering; Food Rheology and Texture; Food Process Engineering; Food Plant Design, which are then expanded into multiple subtopics, each as a chapter. These four volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs
Download or read book Handbook of Food Engineering written by Dennis R. Heldman and published by CRC Press. This book was released on 2018-12-19 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the complexity of the food supply system increases, the focus on processes used to convert raw food materials and ingredients into consumer food products becomes more important. The Handbook of Food Engineering, Third Edition, continues to provide students and food engineering professionals with the latest information needed to improve the efficiency of the food supply system. As with the previous editions, this book contains the latest information on the thermophysical properties of foods and kinetic constants needed to estimate changes in key components of foods during manufacturing and distribution. Illustrations are used to demonstrate the applications of the information to process design. Researchers should be able to use the information to pursue new directions in process development and design, and to identify future directions for research on the physical properties of foods and kinetics of changes in the food throughout the supply system. Features Covers basic concepts of transport and storage of liquids and solids, heating and cooling of foods, and food ingredients New chapter covers nanoscale science in food systems Includes chapters on mass transfer in foods and membrane processes for liquid concentration and other applications Discusses specific unit operations on freezing, concentration, dehydration, thermal processing, and extrusion The first four chapters of the Third Edition focus primarily on the properties of foods and food ingredients with a new chapter on nanoscale applications in foods. Each of the eleven chapters that follow has a focus on one of the more traditional unit operations used throughout the food supply system. Major revisions and/or updates have been incorporated into chapters on heating and cooling processes, membrane processes, extrusion processes, and cleaning operations.
Download or read book Confectionery and Chocolate Engineering written by Ferenc A. Mohos and published by John Wiley & Sons. This book was released on 2023-10-23 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: Confectionery and chocolate manufacture has been dominated by large-scale industrial processing for several decades. It is often the case though, that a trial and error approach is applied to the development of new products and processes, rather than verified scientific principles. Confectionery and Chocolate Engineering: Principles and Applications, Second edition, adds to information presented in the first edition on essential topics such as food safety, quality assurance, sweets for special nutritional purposes, artizan chocolate, and confectioneries. In addition, information is provided on the fading memory of viscoelastic fluids, which are briefly discussed in terms of fractional calculus, and gelation as a second order phase transition. Chemical operations such as inversion, caramelization, and the Maillard reaction, as well as the complex operations including conching, drying, frying, baking, and roasting used in confectionery manufacture are also described. This book provides food engineers, scientists, technologists and students in research, industry, and food and chemical engineering-related courses with a scientific, theoretical description and analysis of confectionery manufacturing, opening up new possibilities for process and product improvement, relating to increased efficiency of operations, the use of new materials, and new applications for traditional raw materials.
Download or read book Characterization of Cereals and Flours written by Gonul Kaletunc and published by CRC Press. This book was released on 2019-07-17 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterization of Cereals and Flours is a state-of-the-art reference that details the latest advances to characterize the effects of manufacturing processes and storage conditions on the thermal, mechanical, and structural properties of cereal flours and their products - examining the influence of moisture absorption, storage temperature, baking, and extrusion processing on flour and cereal product texture, shelf-life, and quality. The book discusses the influence of additives on pre- and postprocessed food biopolymers; the development of databases and construction of state diagrams to illustrate the state and function of cereal flours before, during, and after production; and the current techniques in image analysis, light and electron microscopy, and NMR spectroscopy used to analyze the microstructure of cereal products. It also discusses the methods used to optimize processing parameters and formulations to produce end-products with desirable sensory and textural properties; the shelf life of cereal products; and the relationships between the sensory and physical characteristics of cereal foods.
Download or read book Advances in Baking Technology written by B. S. KAMEL AND C. E. STAUFFER and published by Springer. This book was released on 2013-12-11 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalog of Copyright Entries Third Series written by Library of Congress. Copyright Office and published by Copyright Office, Library of Congress. This book was released on 1974 with total page 1582 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Bakery and Confectionery written by S.M.D. Mathuravalli and published by CRC Press. This book was released on 2021-11-18 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bakery products, due to great nutrient value and affordability, are an element of huge consumption. Due to the rapidly increasing population, the rising foreign influence, the emergence of a working population and the changing eating habits of people, they have gained popularity among people, causing significantly to the growth trajectory of the bakery industry. The Handbook of Bakery and Confectionery delineates a theoretical and practical knowledge on bakery and confectionery. Chapter 1-21: This part deals with basic concepts in baking and includes chapters on all bakery ingredients and their functions, bakery products in the baking industry. Chapter 22-23: This section provides an affluent information about production of various chocolates and toffees. Note: T&F does not sell or distribute the hardback in India, Pakistan, Nepal, Bhutan, Bangladesh and Sri Lanka.
Download or read book Handbook on Sourdough Biotechnology written by Marco Gobbetti and published by Springer Science & Business Media. This book was released on 2012-12-12 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last few decades, many efforts have been made to exploit sourdough’s potential for making baked goods. Through the biotechnology of this traditional baking method, many sensory, rheological, nutritional, and shelf-life properties have been discovered and/or rediscovered. Bakery industries are greatly attracted by the potentials that sourdough presents, and new industrial protocols are being developed. To the best of our knowledge, there has been no single book dedicated to sourdough biotechnology, and which clearly demonstrate its potential. This book aims at defining and highlighting the microbiological, technological, nutritional, and chemical aspects of sourdough biotechnology. The book will be the first reference guide on this topic for the worldwide scientific, teaching and students communities, also opening a way of communication and transferring the main results to a more productive industrial application.
Download or read book Processed Cheese Science and Technology written by Mamdouh El-Bakry and published by Woodhead Publishing. This book was released on 2022-02-11 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Processed Cheese Science and Technology: Ingredients, Manufacture, Functionality, Quality, and Regulations details the most recent developments and updates regarding processed cheeses and cheese products. It offers comprehensive information on all aspects of processed cheese, including manufacturing, types, ingredients, flavors, colors, preservatives, functionality (texture and rheology), analyses, quality, microbiology, regulations and legislations. Structured into 16 chapters, the book begins with an introduction that provides a general overview of processed cheese, followed by a detailed description of the ingredients used in manufacturing, such as using cheeses as ingredients, vegetable-originated ingredients, salts, and more. In addition, low sodium and low-salt processed cheeses are discussed, highlighting the potential benefits for human health. Technological aspects of processed cheese are also covered, followed by an outline of special types of processed cheeses. The book then goes on to examine techniques for end-product characterization, as well as the quality aspects including the microbiology of processed cheese. The last chapter discusses the applications, current challenges, and market trends of processed cheese. Processed Cheese Science and Technology: Ingredients, Manufacture, Functionality, Quality, and Regulations is an excellent resource aimed at food scientists, researchers in academia, and individuals working in the food industry and the commercial sector with a focus on processed cheeses and their end-products. - Offers the most complete coverage of processed cheese products to-date - Led by active researchers and educators with expertise in processed cheeses, featuring chapters by global dairy science experts - Includes extensive lists of references for further reading at the end of each chapter
Download or read book Mixolab written by Arnaud Dubat and published by Academic Press. This book was released on 2016-04-27 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publishing high-quality food production applications handbooks is a hallmark of AACCI PRESS and Mixolab: A New Approach to Rheology is no exception. Increasing consumer demand for quality foods with superior nutritional value makes innovative tools like the Mixolab of increasing interest to food developers and producers. Operators, breeders, millers, researchers, product developers, formulators, and bakers will find answers to their questions, along with guidelines for maximizing the use of the Mixolab for a wide range of applications. Gaining a better understanding of the instrument's capabilities will assist in discovery of novel uses by both research and production professionals. Key Features: Technical description of the Mixolab and comparison with existing devices Coverage of durum wheat, rice, corn, buckwheat, and other cereals Specific focus on gluten, starch, ingredients, and enzymes Influence of sugar, fats, and salt on dough rheology International comparisons of HACCP experiences Table of uses for specific carbohydrates Descriptions of improved laboratory techniques Wheat testing for breeders An Essential Reference For: Additive manufacturers Bakers Breeders Enzyme manufacturers Millers Quality control laboratories Research laboratories Research and development centers Storage elevators Students Universities Yeast producers
Download or read book Swainson s Handbook of Technical and Quality Management for the Food Manufacturing Sector written by M Swainson and published by Woodhead Publishing. This book was released on 2018-11-15 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focused on the expansive and highly demanding subject of Food Industry "Technical & Quality Management". As the world's most vital industry "Food Production" is complex, multifaceted and continuously scrutinised. Food scares and product recalls, on national and international scales, demonstrate the persistent challenge to identify, monitor and control all hazards, and also address the increasing criminal threats of Food Fraud, Adulteration & Intentional Contamination. With the benefit of unique perspectives gained by working across Quality, Technical and Operations Management roles at all levels within the food industry, Swainson's Handbook of Technical and Quality Management considers the very diverse remits and particular challenges of those working to assure product Quality, Safety and Legality in the sector. This book provides insights and guidance on the "Applied Practice" of Industrial Quality and Technical Management, written from the perspective of the industry practitioner. "Knowing what to do is half of the challenge, but being able to then make it happen is crucial" – a fact which is often less well considered in food sector information resources. Split into two sections, the book first reviews generic aspects of Food Quality and Technical Management activities with particular regard to: Food Sector Challenges and the Role of Technical and Quality Management; Defining Technical and Quality Standards; The Food Safety and Quality Management System; Raw Materials and Packaging Supplier Control; Site Standards; Product Control and HACCP Considerations; Operations and Process Control; Personnel Control; Audits; Non-Conformance, Recall & Crisis Management; Managing the Technical Department. In the second part of the book Guest Authors share their expertise on a range of specialist topics, providing significant breadth and depth to the content which includes: Review of Third party audit schemes; Insights into supplying supermarkets with regard to good technical and quality management practices; Enforcement authority perspectives on the food manufacturing sector. Also covered are the specific sector challenges of food quality and safety assurance in Fruit and vegetables; Herbs and spices, Cereals, Baked products, Canning and "Cook – Chill" Ready Meals, Soups and Sauces. - Compiled expertise of food sector specialists with extensive industrial experience. - Edited by an industry and academic expert with over 25 years experience of technical and quality management in the food sector. - Contains Technical and Quality Management information that is relevant to a wide range of sectors in the food industry. - Also examines Technical and Quality Management practice in specific food applications and reviews relevant compliance standards.
Download or read book Handbook of Hydrocolloids written by Glyn O. Phillips and published by Woodhead Publishing. This book was released on 2020-11-06 with total page 1192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Hydrocolloids, Third Edition is a must-have substantive reference on hydrocolloids, helping food industry scientists ever since its first edition was published and well received. This thoroughly updated and expanded edition reviews the structure, function, properties, and applications of a broad range of hydrocolloids used in food and related industries. The third edition updates existing chapters on developments and theories on the structure and functional characteristics of individual hydrocolloids. The book provides additional chapters on new techniques for the chemical and physicochemical characterization of hydrocolloids, and applications technologies for encapsulation and controlled release of active compounds. Edited by two leading international authorities in the field, this third edition continues to be relevant to food industry researchers, food manufacturers, graduate and postgraduate students, particularly in food, pharmaceutical, and cosmetic sciences. - Introduces to food hydrocolloids considering regulatory aspects and functional characteristics - Examines the manufacture, structure, function, and applications of over twenty-five hydrocolloids - Brings a detailed overview of the function of hydrocolloids as emulsifiers, rheological modifiers, film formers, and encapsulation agents
