Download or read book The Fabrication and Assessment of Three Dimensional Photonic Crystals written by David Neil.. Sharp and published by . This book was released on 2001 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Photonic Crystals Theory Applications and Fabrication written by Dennis W Prather and published by John Wiley & Sons. This book was released on 2009-05-26 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Only Source You Need for Understanding the Design and Applications of Photonic Crystal-Based Devices This book presents in detail the fundamental theoretical background necessary to understand the unique optical phenomena arising from the crystalline nature of photonic-crystal structures and their application across a range of disciplines. Organized to take readers from basic concepts to more advanced topics, the book covers: Preliminary concepts of electromagnetic waves and periodic media Numerical methods for analyzing photonic-crystal structures Devices and applications based on photonic bandgaps Engineering photonic-crystal dispersion properties Fabrication of two- and three-dimensional photonic crystals The authors assume an elementary knowledge of electromagnetism, vector calculus, Fourier analysis, and complex number analysis. Therefore, the book is appropriate for advanced undergraduate students in physics, applied physics, optics, electronics, and chemical and electrical engineering, as well as graduate students and researchers in these fields.
Download or read book Photonic Crystals written by Kurt Busch and published by John Wiley & Sons. This book was released on 2006-05-12 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: The majority of the contributions in this topically edited book stems from the priority program SPP 1113 "Photonische Kristalle" run by the Deutsche Forschungsgemeinschaft (DFG), resulting in a survey of the current state of photonic crystal research in Germany. The first part of the book describes methods for the theoretical analysis of their optical properties as well as the results. The main part is dedicated to the fabrication, characterization and modeling of two- and three-dimensional photonic crystals, while the final section presents a wide spectrum of applications: gas sensors, micro-lasers, and photonic crystal fibers. Illustrated in full color, this book is not only of interest to advanced students and researchers in physics, electrical engineering, and material science, but also to company R&D departments involved in photonic crystal-related technological developments.
Download or read book Fabrication of Three dimensional Photonic Crystals Via Direct Laser Writing in an All inorganic Photoresist written by Sean Hang Edmond Wong and published by . This book was released on 2005 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Fabrication and Characterization of Three dimensional Photonic Crystals written by Lifeng Chen and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Three dimensional Photonic Crystals Via Direct Laser Writing written by Markus Deubel and published by . This book was released on 2006 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Fabrication and Characterization of Three dimensional Chiral Photonic Crystals written by Michael Thiel and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication of Two and Three Dimensional Photonic Crystals and Photonic Quasi Crystals by Interference Technique written by Ngoc Diep Lai and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fabrication of Two- and Three-Dimensional Photonic Crystals and Photonic Quasi-Crystals by Interference Technique.
Download or read book Fabrication and Characterization of Three dimensional Infrarer Photonic Crystals written by Lisa Zavieh and published by . This book was released on 1999 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication of Three dimensional Photonic Crystals Via Direct Laser Writing in an All inorganic Photoresist microform written by Sean Hang Edmond Wong and published by Library and Archives Canada = Bibliothèque et Archives Canada. This book was released on 2005 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication and Characterization of Three Dimensional Photonic Crystals Generated by Multibeam Interference Lithography written by Ying-Chieh Chen and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Multibeam interference lithography is investigated as a manufacturing technique for three-dimensional photonic crystal templates. In this research, optimization of the optical setup and the photoresist initiation system leads to a significant improvement of the optical quality of the crystal, as characterized by normal incidence optical spectroscopy. Theoretical spectra are calculated and demonstrate close agreement with experimental values, indicating that this fabrication process achieves excellent optical quality. X-ray microscopy provides non-destructive inspection of the fabricated crystals at nano-scale resolution. A reconstructed crystal model is generated by computed tomography which allows for comparison to a predicted structure's geometry and optical spectra. Using the polymer crystal as a template, electrodeposition is performed to completely infiltrate the crystal with Cu2O. After polymer removal the inverted Cu2O crystal exhibits a high peak reflectance at the predicted wavelength, indicating the structure is an exact inverse of the template. A conformal growth algorithm is developed for the commonly used chemical vapor deposition infiltration technique to explain growth results and verified experimentally with atomic layer deposition of oxide materials. Finally, a customized chemically amplified positive photoresist system and its processing steps are developed as a route to zero-shrinkage template material for high fidelity patterning of the designed interference patterns.
Download or read book Fabrication and Analysis of 3D Colloidal Photonic Crystals written by Ka Ho Man and published by . This book was released on 2006 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanofabrication of Three dimensional Photonic Crystals written by Patty Pei-Ling Chang-Chien and published by . This book was released on 1997 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fabrication and Characterization of Three Dimensional Photonic Crystals Generated by Multibeam Interference Lithography written by Ying-Chieh Chen and published by . This book was released on 2009 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multibeam interference lithography is investigated as a manufacturing technique for three-dimensional photonic crystal templates. In this research, optimization of the optical setup and the photoresist initiation system leads to a significant improvement of the optical quality of the crystal, as characterized by normal incidence optical spectroscopy. Theoretical spectra are calculated and demonstrate close agreement with experimental values, indicating that this fabrication process achieves excellent optical quality. X-ray microscopy provides non-destructive inspection of the fabricated crystals at nano-scale resolution. A reconstructed crystal model is generated by computed tomography which allows for comparison to a predicted structure's geometry and optical spectra. Using the polymer crystal as a template, electrodeposition is performed to completely infiltrate the crystal with Cu2O. After polymer removal the inverted Cu2O crystal exhibits a high peak reflectance at the predicted wavelength, indicating the structure is an exact inverse of the template. A conformal growth algorithm is developed for the commonly used chemical vapor deposition infiltration technique to explain growth results and verified experimentally with atomic layer deposition of oxide materials. Finally, a customized chemically amplified positive photoresist system and its processing steps are developed as a route to zero-shrinkage template material for high fidelity patterning of the designed interference patterns.
Download or read book Fabrication of Two dimensional and Three dimensional Photonic Crystal Devices for Applications in Chip scale Optical Interconnects written by and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: To date, the realization of chip-scale optical interconnects has been inhibited by the lack of a device technology that can provide optical functionality at a scale commensurate with integrated circuits. To overcome this limitation, I propose the realization of an "optical superhighway" as an alternative interconnect paradigm for next-generation integrated circuits using semiconductor-based photonic-crystal (PhC) devices. PhCs have the potential to be the elementary building blocks of the next generation of opto-electronic devices and integrated circuits. This potential has invigorated global research interest in hybrid optical-electrical interconnects at the chip scale. In this thesis, I will present the development of such Nano-Photonic Crystal (PhC) interconnects using conventional CMOS fabrication technology, thereby enabling photonic functionality on the VLSI scale. Accordingly, I will discuss the fabrication of high fill-factor planar PhC devices on silicon-on-insulator substrates, using both capacitively coupled and inductively coupled plasma etching. Functional, sub-100-nm, high-aspect-ratio PhC devices will be presented, along with the technical challenges encountered in their realization. Also, a robust etch-process toolbox has been developed that, in addition to realizing chip-scale optical interconnects, also paves the way for applications in other technology niches like MEMS, terahertz devices, nanophotonics and microfluidics, to be realized in a single silicon platform, thus enabling systems-on-a-chip. In-plane optical routing in ultra-thin silicon-on-sapphire is also explored as part of this investigation. In addition, I will discuss the development of a sub-surface silicon optical bus (S3B), a buried silicon optical interconnect technology. The approach relies on engineering the dispersion properties of three-dimensional (3D) photonic crystals embedded in silicon to control light propagation. In particular, a novel method of fabricating buried 3D photonic-crystal structures using conventional planar silicon micromachining will be presented. This method utilizes a single planar etch mask and time-multiplexed etch process along with sidewall oxidation to create an array of spherical voids with three-dimensional symmetry. Preliminary results will be presented to support the feasibility of realizing chip-scale optical interconnects using the proposed approach. The results of this research will not only help realize a new generation of optical integrated circuits, but also provide a solution to the global interconnect delay anticipated in next-generation of high-end integrated circuits. These PhC devices could very well provide the building blocks for the integrated circuits of the future.
Download or read book Photonic Crystals written by Jean-Michel Lourtioz and published by Springer Science & Business Media. This book was released on 2008-03-19 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the theoretical background required for modelling photonic crystals and their optical properties, while presenting the large variety of devices where photonic crystals have found application. As such, it aims at building bridges between optics, electromagnetism and solid state physics. This second edition includes the most recent developments of two-dimensional photonic crystal devices, as well as some of the last results reported on metamaterials.
Download or read book Photonic Crystals written by Kuon Inoue and published by Springer. This book was released on 2013-11-11 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photonic crystals are a very hot topic in photonics. The basics, fabrication, application and new theoretical developments in the field of photonic crystals are presented in a comprehensive way, together with a survey of the advanced state-of-the-art report.
