EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book The Evaluation of the Impact of New Technologies for Medium Duty Parcel Delivery Trucks on Fuel Consumption

Download or read book The Evaluation of the Impact of New Technologies for Medium Duty Parcel Delivery Trucks on Fuel Consumption written by and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this paper, researchers at the National Renewable Energy Laboratory present the results of simulation studies to evaluate potential fuel savings as a result of improvements to vehicle rolling resistance, coefficient of drag, and vehicle weight as well as hybridization for four power trains for medium-duty parcel delivery vehicles. The vehicles will be modeled and simulated over 1,290 real-world driving trips to determine the fuel savings potential based on improvements to each technology and to identify best use cases for each platform. The results of impacts of new technologies on fuel saving will be presented, and the most favorable driving routes on which to adopt them will be explored.

Book Technologies and Approaches to Reducing the Fuel Consumption of Medium  and Heavy Duty Vehicles

Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-07-30 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.

Book The Best of COMVEC 2016 Select Technical Papers from the SAE Commercial Vehicle Engineering Congress

Download or read book The Best of COMVEC 2016 Select Technical Papers from the SAE Commercial Vehicle Engineering Congress written by Kevin Jost and published by SAE International. This book was released on 2016-09-24 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt: This special collection highlights some of the best technical papers that represent the breadth of the entire technical program. Leading industry perspectives are reflected by the corporate contributions that are included in this group, along with a specific focus on connectivity, the theme of the 2016 event. The commercial vehicle industry has always been focused on improving efficiency. These ten characteristic offerings present cutting-edge trends, technologies, and solutions that provide greater benefit and the application of knowledge to solve problems and guide future innovation. These studies are presented by experts from industrial, governmental, and academic partners on topics that include: • Autonomous commercial vehicles • Computational fluid dynamics and aerodynamics for heavy-duty, on-road applications • Fuel and emissions efficiency of medium-duty powertrain configurations • Intelligently controlled air-suspension systems • Improving total cost of ownership by gains in thermal efficiency • New simulation and testing techniques enabling next generation commercial vehicle technology The leadership team has focused on bringing in a broad mixture of participants to COMVEC to discuss current technologies and the future challenges of the commercial vehicle industry. This first of its kind special publication draws on the strength of the event’s program and features ten of the best technical papers from the SAE International Congress.

Book Technologies and Approaches to Reducing the Fuel Consumption of Medium  and Heavy Duty Vehicles

Download or read book Technologies and Approaches to Reducing the Fuel Consumption of Medium and Heavy Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2010-08-30 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.

Book Medium  and Heavy Duty Fuel Efficiency Improvement Program

Download or read book Medium and Heavy Duty Fuel Efficiency Improvement Program written by and published by . This book was released on 2011 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Reducing Fuel Consumption and Greenhouse Gas Emissions of Medium  and Heavy Duty Vehicles  Phase Two

Download or read book Reducing Fuel Consumption and Greenhouse Gas Emissions of Medium and Heavy Duty Vehicles Phase Two written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2020-06-15 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Medium- and heavy-duty trucks, motor coaches, and transit buses - collectively, "medium- and heavy-duty vehicles", or MHDVs - are used in every sector of the economy. The fuel consumption and greenhouse gas emissions of MHDVs have become a focus of legislative and regulatory action in the past few years. This study is a follow-on to the National Research Council's 2010 report, Technologies and Approaches to Reducing the Fuel Consumption of Medium-and Heavy-Duty Vehicles. That report provided a series of findings and recommendations on the development of regulations for reducing fuel consumption of MHDVs. On September 15, 2011, NHTSA and EPA finalized joint Phase I rules to establish a comprehensive Heavy-Duty National Program to reduce greenhouse gas emissions and fuel consumption for on-road medium- and heavy-duty vehicles. As NHTSA and EPA began working on a second round of standards, the National Academies issued another report, Reducing the Fuel Consumption and Greenhouse Gas Emissions of Medium- and Heavy-Duty Vehicles, Phase Two: First Report, providing recommendations for the Phase II standards. This third and final report focuses on a possible third phase of regulations to be promulgated by these agencies in the next decade.

Book Sustainable Freight Transport

Download or read book Sustainable Freight Transport written by Lóri Tavasszy and published by MDPI. This book was released on 2018-12-10 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Sustainable Freight Transport" that was published in Sustainability

Book Cost  Effectiveness  and Deployment of Fuel Economy Technologies for Light Duty Vehicles

Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.

Book Federal Register

Download or read book Federal Register written by and published by . This book was released on 2013-12 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Assessment of Fuel Economy Technologies for Light Duty Vehicles

Download or read book Assessment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2011-06-03 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various combinations of commercially available technologies could greatly reduce fuel consumption in passenger cars, sport-utility vehicles, minivans, and other light-duty vehicles without compromising vehicle performance or safety. Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. According to its estimates, adopting the full combination of improved technologies in medium and large cars and pickup trucks with spark-ignition engines could reduce fuel consumption by 29 percent at an additional cost of $2,200 to the consumer. Replacing spark-ignition engines with diesel engines and components would yield fuel savings of about 37 percent at an added cost of approximately $5,900 per vehicle, and replacing spark-ignition engines with hybrid engines and components would reduce fuel consumption by 43 percent at an increase of $6,000 per vehicle. The book focuses on fuel consumption-the amount of fuel consumed in a given driving distance-because energy savings are directly related to the amount of fuel used. In contrast, fuel economy measures how far a vehicle will travel with a gallon of fuel. Because fuel consumption data indicate money saved on fuel purchases and reductions in carbon dioxide emissions, the book finds that vehicle stickers should provide consumers with fuel consumption data in addition to fuel economy information.

Book Report summaries

    Book Details:
  • Author : United States. Environmental Protection Agency
  • Publisher :
  • Release : 1983
  • ISBN :
  • Pages : 1584 pages

Download or read book Report summaries written by United States. Environmental Protection Agency and published by . This book was released on 1983 with total page 1584 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Energy  a Continuing Bibliography with Indexes

Download or read book Energy a Continuing Bibliography with Indexes written by and published by . This book was released on 1981 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Ninth Summary Report

Download or read book Ninth Summary Report written by and published by . This book was released on 1976 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Energy Research Abstracts

Download or read book Energy Research Abstracts written by and published by . This book was released on 1990 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book Annual Index abstracts of SAE Technical Papers

Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2007 with total page 1218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Book The Law of Energy for Sustainable Development

Download or read book The Law of Energy for Sustainable Development written by IUCN Academy of Environmental Law. Colloquium and published by Cambridge University Press. This book was released on 2005-01-24 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research focus for the IUCN Academy of Environmental Law in 2003 was a timely and challenging one, entitled 'The Law of Energy for Sustainable Development'. As contemporary world politics demonstrates, energy resources and generation are crucial issues facing the international community. As research on energy law, at the international, regional, and national level is in its infancy, the insights provided by the contributors to this 2005 volume are a significant addition to the field.

Book Highway Safety Literature

Download or read book Highway Safety Literature written by and published by . This book was released on 1980 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: