Download or read book The Electrodeposition and Characterisation of Cobalt and Copper Matrix Composite Coatings written by Stephen Andrew Holt and published by . This book was released on 1994 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Matrix Composites written by Manoj Gupta and published by MDPI. This book was released on 2018-08-15 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Metal Matrix Composites" that was published in Metals
Download or read book Carbon Nanotubes written by Andy Nieto and published by CRC Press. This book was released on 2021-05-18 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This discovery of carbon nanotubes (CNT) three decades ago ushered in the technological era of nanotechnology. Among the most widely studied areas of CNT research is their use as structural reinforcements in composites. This book describes the development of CNT reinforced metal matrix composites (CNT-MMCs) over the last two decades. The field of CNT-MMCs is abundant in fundamental science, rich in engineering challenges and innovations and ripe for technological maturation and commercialization. The authors have sought to present the current state of the-art in CNT-MMC technology from their synthesis to their myriad potential end-use applications. Specifically, topics explored include: • Advantages, limitations, and evolution of processing techniques used to synthesize and fabricate CNT-MMCs • Emphasizes dispersion techniques of CNTs in metallic systems, a key challenge to the successful and widespread implementation of CNT-MMCs. Methods for quantification and improved control of CNT distributions are presented • Methods for quantification and improved control of CNT distributions are presented • Characterization techniques uniquely suited for charactering these nanoscale materials and their many chemical and physical interactions with the metal matrix, including real-time in-situ characterization of deformation mechanisms • Electron microscope images from premier studies enrich discussions on micro-mechanical modeling, interfacial design, mechanical behavior, and functional properties • A chapter is dedicated to the emergence of dual reinforcement composites that seek to enhance the efficacy of CNTs and lead to material properties by design This book highlights seminal findings in CNT-MMC research and includes several tables listing processing methods, associated CNT states, and resulting properties in order to aid the next generation of researchers in advancing the science and engineering of CNT-MMCs. In addition, a survey of the patent literature is presented in order to shed light on what the first wave of CNT-MMC commercialization may look like and the challenges that will have to be overcome, both technologically and commercially.
Download or read book The Electrodeposition and Characterisation of Compositionally Modulated Tin cobalt Alloy Coatings as Lead free Plain Bearing Material written by Yi Zhang and published by . This book was released on 2008 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of MEACM 2020 written by Lifang Zheng and published by Springer Nature. This book was released on 2021-05-31 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of the 4th International Conference on Mechanical Engineering and Applied Composite Materials (MEACM), held in Beijing, China on October 24-25, 2020. The conference brought together researchers from several countries and covered all major areas of mechanical engineering and applied composite materials, new applications and current trends. The topics covered include: structure and design, mechanical manufacturing and automation, robotics and mechatronics, mechanical behavior of nanomaterials, nanocomposites, and composite mechanics. Given its scope, the book offers a source of information and inspiration for researchers seeking to improve their work and gather new ideas for future developments.
Download or read book Applied Chemistry and Chemical Engineering Volume 3 written by A. K. Haghi and published by CRC Press. This book was released on 2017-12-22 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding mathematical modeling is fundamental in chemical engineering. This book reviews, introduces, and develops the mathematical models that are most frequently encountered in sophisticated chemical engineering domains. The volume provides a collection of models illustrating the power and richness of the mathematical sciences in supplying insight into the operation of important real-world systems. It fills a gap within modeling texts, focusing on applications across a broad range of disciplines. The first part of the book discusses the general components of the modeling process and highlights the potential of modeling in the production of nanofibers. These chapters discuss the general components of the modeling process and the evolutionary nature of successful model building in the electrospinning process. Electrospinning is the most versatile technique for the preparation of continuous nanofibers obtained from numerous materials. This section of book summarizes the state-of-the art in electrospinning as well as updates on theoretical aspects and applications. Part 2 of the book presents a selection of special topics on issues in applied chemistry and chemical engineering, including nanocomposite coating processes by electrocodeposition method, entropic factors conformational interactions, and the application of artificial neural network and meta-heuristic algorithms. This volume covers a wide range of topics in mathematical modeling, computational science, and applied mathematics. It presents a wealth of new results in the development of modeling theories and methods, advancing diverse areas of applications and promoting interdisciplinary interactions between mathematicians, scientists, engineers and representatives from other disciplines.
Download or read book Electrodeposition of Composite Materials written by A.M.A Mohamed and published by BoD – Books on Demand. This book was released on 2016-03-23 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanocomposite coatings have various properties that can be utilized for corrosion protection and tribological improvements. Synthesis of the nanocomposite coatings using an electrodeposition method allows unique control of the experimental parameters. By fine tuning the experimental parameters, various compositions and properties can be obtained for the nanocomposite coatings. This book covers some of the electrochemical methods used for nanocomposite coating deposition as well as discusses in detail examples of several nanocomposite coating. The corrosion and tribological performance of the nanocomposite coatings are also covered and some nanocomposite coatings are discussed for specific technological areas, such as fuel cells and microelectronics.
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gold written by Christopher Corti and published by CRC Press. This book was released on 2009-12-02 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gold is used in a wide range of industrial and medical applications and accounts for over 10 percent of the annual demand for metal, worth billions of dollars annually. While much has been written about the mystique and trade of gold, very little has been written about the science and technology in which it is involved. Edited by two respected auth
Download or read book Chemical Abstracts written by and published by . This book was released on 2002 with total page 2540 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1976 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nanocomposite Coatings written by Mahmood Aliofkhazraei and published by Nova Science Pub Incorporated. This book was released on 2011-01-01 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews research activities around fabrication of these kinds of two dimensional nanostructured coatings with examples of enhanced mechanical properties, corrosion resistance, and physical characteristics. As one of the useful and simple methods for fabrication of nanocomposite coatings, electrochemical deposition (electroplating) techniques are a strong focus in this book. The relation among nanotechnology and these kinds of nanostructures that come from "size effect" and "distribution effect" is discussed through different chapters of this book. Nanocomposite coatings have numerous advantages.
Download or read book Modern Surface Engineering Treatments written by Mahmood Aliofkhazraei and published by BoD – Books on Demand. This book was released on 2013-05-22 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering can be defined as an enabling technology used in a wide range of industrial activities. Surface engineering was founded by detecting surface features which destroy most of pieces, e.g. abrasion, corrosion, fatigue, and disruption; then it was recognized, more than ever, that most technological advancements are constrained with surface requirements. In a wide range of industry (such as gas and oil exploitation, mining, and manufacturing), the surfaces generate an important problem in technological advancement. Passing time shows us new interesting methods in surface engineering. These methods usually apply to enhance the surface properties, e.g. wear rate, fatigue, abrasion, and corrosion resistance. This book collects some of new methods in surface engineering.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1972 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electrodeposition Coatings by Ionic Co discharge Technique written by See Leng Tay and published by . This book was released on 2016 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical co-deposition of metal with a second phase material has been widely applied in industry to improve the properties of composite coatings. Traditional composite coatings were generally prepared by suspending the second phase particles in a plating bath solution with vigorous agitation to achieve good dispersion of particles. Most research has focused on the co-deposition of metal matrix with hard oxides, carbides, nitrides, diamond, etc. However, little research has investigated the two insoluble metals coatings. The overall aim of this thesis is to study and develop two insoluble metals (or two phases) coatings using ionic co-discharge method. Bi was co-deposited with different coating metal matrices (Ni, Ag, Zn and Cu). A number of plating parameters including current density, deposition time, direct or pulse current supply and concentration of Bi ions in the electrolyte have been investigated to evaluate their effect on the coating preparation and quality. Experimental results indicated that the microstructure and properties of Bi doped coatings can be very varied on different metal matrices even the co-deposition processes were similar. In-situ formation of NiBi intermetallic compound was observed when Bi is co-deposited with Ni using the ionic codischarge process. Ag-Bi alloy was produced with Bi acting as the alloying element in Ag-Bi coating. Bi is insoluble in the Zn or Cu matrix at a relatively small proportion of Bi content. The mechanical properties of the co-deposited coatings were generally enhanced by the refined microstructure and dispersion strengthening effect due to the incorporation of Bi. The content of Bi in the coating matrix, except for Cu-Bi, was dependent on the plating parameters, which was increased with the applied current density, the employment of pulse current and the higher content of Bi in the electrolyte. All coatings developed in this work presented better mechanical properties with the incorporation of a small quantity of Bi without losing other desired properties such as corrosion resistance, conductivity and antimicrobial properties.
Download or read book Recent Advancements in Multidimensional Applications of Nanotechnology written by Virat Khanna and published by Bentham Science Publishers. This book was released on 2024-07-31 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Advancements in Multidimensional Applications of Nanotechnology provides a comprehensive overview of the latest advancements and applications of nanotechnology across various dimensions. Covering a wide range of topics, from electron microscopy to nanotherapeutic strategies, the book explores the diverse applications of nanotechnology in industries and research fields. Key Features: Comprehensive Coverage: Gain insights into electron microscopy, biogenic synthesis methods, energy applications, and more. Industry Applications: Discover how nanotechnology is revolutionizing industries such as energy, oil and gas, agriculture, and healthcare. Cutting-Edge Developments: Stay ahead of the curve with discussions on copper oxide nanoparticles, nano-coatings, and thin film optimization for solar cells. Biomedical Breakthroughs: Explore the exciting realm of biomedical applications, from metallic nanoparticles in healthcare to biogenic synthesis methods. Practical Insights: Benefit from practical insights and case studies that showcase real-world applications of nanotechnology.
Download or read book Silicon Nitride Bioceramics written by B. Sonny Bal and published by Springer Nature. This book was released on with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt:
