Download or read book The Effects of Fluid Rheology on the Dynamics of Isothermal and Non isothermal Flows of Viscoelastic Fluids written by Mark Thomas Arigo and published by . This book was released on 1999 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book IUTAM Symposium on Numerical Simulation of Non Isothermal Flow of Viscoelastic Liquids written by J.F. Dijksman and published by Springer. This book was released on 2012-10-05 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decades a considerable effort has been made on the computation of the isothermal flow of viscoelastic fluids. In fact the activities related to this particular field of non-Newtonian fluid mechanics have focused on the following questions: which type of constitutive equation describes non-Newtonian fluid behaviour; how to measure fluid parameters; and what type of computational scheme leads to reliable, stable and cost-effective computer programs. During the same period, typical non-Newtonian fluid phenomena have been experimentally examined, such as the flow through a `four-to-one' contraction, the flow around a sphere or separation flow, providing fresh challenges for numerical modellers. Apart from momentum transport, however, fluid flow is strongly influenced by heat treansport in most real industrial operations in which non-Newtonian fluids are processed. The IUTAM Symposium on `Numerical Simulation of Nonisothermal Flow of Viscoelastic Liquids' held at Rolduc Abbey in Kerkrade, the Netherlands, November 1--3, 1993, was organised to monitor the state of affairs in regard to the influence of nonisothermal effects on the flow of a viscoelastic liquid. The present collection of papers gives an overview of what has been achieved so far. It is a milestone in the rapidly emerging and exciting new field in non-Newtonian fluid mechanics.
Download or read book Effects of Fluid Viscoelasticity in Non Isothermal Flows written by Tirivanhu Chinyoka and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effects of Fluid Viscoelasticity in Non-Isothermal Flows.
Download or read book Rheology Volume II written by Crispulo Gallegos and published by EOLSS Publications. This book was released on 2010-11-30 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rheology is a component of Encyclopedia of Chemical Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty Encyclopedias. Rheology is the study of the flow of matter. It is classified as a physics discipline and focuses on substances that do not maintain a constant viscosity or state of flow. That can involve liquids, soft solids and solids that are under conditions that cause them to flow. It applies to substances which have a complex molecular structure, such as muds, sludges, suspensions, polymers and other glass formers, as well as many foods and additives, bodily fluids and other biological materials. The theme on Rheology focuses on five main areas, namely, basic concepts of rheology; rheometry; rheological materials, rheological processes and theoretical rheology. Of course, many of the chapters contain material from more than one general area. Rheology is an interdisciplinary subject which embraces many aspects of mathematics, physics, chemistry, engineering and biology. These two volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.
Download or read book Non Newtonian Flow and Applied Rheology written by R. P. Chhabra and published by Butterworth-Heinemann. This book was released on 2011-04-08 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between the theoretical work of the rheologist, and the practical needs of those who have to design and operate the systems in which these materials are handled or processed. It is an established and important reference for senior level mechanical engineers, chemical and process engineers, as well as any engineer or scientist who needs to study or work with these fluids, including pharmaceutical engineers, mineral processing engineers, medical researchers, water and civil engineers. This new edition covers a considerably broader range of topics than its predecessor, including computational fluid dynamics modelling techniques, liquid/solid flows and applications to areas such as food processing, among others. - Written by two of the world's leading experts, this is the only dedicated non-Newtonian flow reference in print. - Since first publication significant advances have been made in almost all areas covered in this book, which are incorporated in the new edition, including developments in CFD and computational techniques, velocity profiles in pipes, liquid/solid flows and applications to food processing, and new heat/mass transfer methods and models. - Covers both basic rheology and the fluid mechanics of NN fluids - a truly self-contained reference for anyone studying or working with the processing and handling of fluids
Download or read book Nonlinear Dynamics of Isothermal and Non isothermal Viscoelastic Flows Through an Axisymmetric Sudden Contraction written by Bulent Yesilata and published by . This book was released on 1998 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonlinear dynamics of isothermal and non-isothermal flows of a viscoelastic fluid (PIB/PB/C14 polymer solution referred to as PIB Boger fluid) in an axisymmetric sudden contraction geometry (4:1) are studied. Such flows are of great importance in commercial polymer processes such as extrusion, injection molding, and fiber spinning, and also in polymer rheology using capillary rheometers. This problem serves as a benchmark problem for the numerical simulation of viscoelastic flows in complex geometries as well.
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2007 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in the Flow and Rheology of Non Newtonian Fluids written by D.A. Siginer and published by Elsevier. This book was released on 1999-05-07 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: These two volumes contain chapters written by experts in such areas as bio and food rheology, polymer rheology, flow of suspensions, flow in porous media, electrorheological fluids, etc. Computational as well as analytical mathematical descriptions, involving appropriate constitutive equations deal with complex flow situations of industrial importance. This work is unique in that it brings together state of the art reviews and recent advances in a variety of areas, involving viscoelastic materials, in a desirable and timely manner.
Download or read book Nonlinear Phenomena in Flows of Viscoelastic Polymer Fluids written by A.I. Leonov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents theoretical and experimental studies of flows of elastic liquids. Falling into this category are particularly the melts and concentrated solutions of such flexible-chain polymers as polyethylene, polyisobutylene and polypropylene, all of which are widely used in polymer processing. These polydisperse polymers vary greatly, from batch to batch, in their mechanical properties and 20% variation in a property is believed to be good enough. l 7 All recent books - devoted to the rheology of polymers do not answer the question of which constitutive equations should be used for solving the fluid mechanic problems of polymer processing in the usual case of an appreciable nonlinear region of deformation where nonlinear effects of shear and extensional elasticity are very important. Viscoelastic constitut ive equations cited commonly (see, e.g. Refs 5 and 6) do not describe simultaneously even the simplest cases of deformations, viz. simple shear and uniaxial extension. Moreover, some of them are internally inconsist ent and sometimes display highly unstable behaviour in simple flows without any fundamental reasons. Even more respected molecular ap free from these defects.
Download or read book Previews of Heat and Mass Transfer written by and published by . This book was released on 2000 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mathematical Modeling for Complex Fluids and Flows written by Michel Deville and published by Springer Science & Business Media. This book was released on 2012-01-12 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modeling for Complex Fluids and Flows provides researchers and engineering practitioners encountering fluid flows with state-of-the-art knowledge in continuum concepts and associated fluid dynamics. In doing so it supplies the means to design mathematical models of these flows that adequately express the engineering physics involved. It exploits the implicit link between the turbulent flow of classical Newtonian fluids and the laminar and turbulent flow of non-Newtonian fluids such as those required in food processing and polymeric flows. The book develops a descriptive mathematical model articulated through continuum mechanics concepts for these non-Newtonian, viscoelastic fluids and turbulent flows. Each complex fluid and flow is examined in this continuum context as well as in combination with the turbulent flow of viscoelastic fluids. Some details are also explored via kinetic theory, especially viscoelastic fluids and their treatment with the Boltzmann equation. Both solution and modeling strategies for turbulent flows are laid out using continuum concepts, including a description of constructing polynomial representations and accounting for non-inertial and curvature effects. Ranging from fundamental concepts to practical methodology, and including discussion of emerging technologies, this book is ideal for those requiring a single-source assessment of current practice in this intricate yet vital field.
Download or read book Viscoelasticity and Rheology written by Arthur S. Lodge and published by Academic Press. This book was released on 2014-06-28 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Viscoelasticity and Rheology covers the proceedings of a symposium by the same title, conducted by the Mathematics Research Center held at the University of Wisconsin-Madison on October 16-18, 1984. The contributions to the symposium are divided into four broad categories, namely, experimental results, constitutive theories, mathematical analysis, and computation. This 16-chapter work begins with experimental topics, including the motion of bubbles in viscoelastic fluids, wave propagation in viscoelastic solids, flows through contractions, and cold-drawing of polymers. The next chapters covering constitutive theories explore the molecular theories for polymer solutions and melts based on statistical mechanics, the use and limitations of approximate constitutive theories, a comparison of constitutive laws based on various molecular theories, network theories and some of their advantages in relation to experiments, and models for viscoplasticity. These topics are followed by discussions of the existence, regularity, and development of singularities, change of type, interface problems in viscoelasticity, existence for initial value problems and steady flows, and propagation and development of singularities. The remaining chapters deal with the numerical simulation of flow between eccentric cylinders, flow around spheres and bubbles, the hole pressure problem, and a review of computational problems related to various constitutive laws. This book will prove useful to chemical engineers, researchers, and students.
Download or read book Fluid Dynamics of Viscoelastic Liquids written by Daniel D. Joseph and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about two special topics in rheological fluid mechanics: the elasticity of liquids and asymptotic theories of constitutive models. The major emphasis of the book is on the mathematical and physical consequences of the elasticity of liquids; seventeen of twenty chapters are devoted to this. Constitutive models which are instantaneously elastic can lead to some hyperbolicity in the dynamics of flow, waves of vorticity into rest (known as shear waves), to shock waves of vorticity or velocity, to steady flows of transonic type or to short wave instabilities which lead to ill-posed problems. Other kinds of models, with small Newtonian viscosities, give rise to perturbed instantaneous elasticity, associated with smoothing of discontinuities as in gas dynamics. There is no doubt that liquids will respond like elastic solids to impulses which are very rapid compared to the time it takes for the molecular order associated with short range forces in the liquid, to relax. After this, all liquids look viscous with signals propagating by diffusion rather than by waves. For small molecules this time of relaxation is estimated as lQ-13 to 10-10 seconds depending on the fluids. Waves associated with such liquids move with speeds of 1 QS cm/s, or even faster. For engineering applications the instantaneous elasticity of these fluids is of little interest; the practical dynamics is governed by diffusion, ·say, by the Navier-Stokes equations. On the other hand, there are other liquids which are known to have much longer times of relaxation.
Download or read book Viscoelastic Fluids written by Ron Darby and published by . This book was released on 1976 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermodynamics of Flowing Systems written by Antony N. Beris and published by Oxford University Press. This book was released on 1994-05-26 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This much-needed monograph presents a systematic, step-by-step approach to the continuum modeling of flow phenomena exhibited within materials endowed with a complex internal microstructure, such as polymers and liquid crystals. By combining the principles of Hamiltonian mechanics with those of irreversible thermodynamics, Antony N. Beris and Brian J. Edwards, renowned authorities on the subject, expertly describe the complex interplay between conservative and dissipative processes. Throughout the book, the authors emphasize the evaluation of the free energy--largely based on ideas from statistical mechanics--and how to fit the values of the phenomenological parameters against those of microscopic models. With Thermodynamics of Flowing Systems in hand, mathematicians, engineers, and physicists involved with the theoretical study of flow behavior in structurally complex media now have a superb, self-contained theoretical framework on which to base their modeling efforts.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Injection Molding written by Rong Zheng and published by Springer Science & Business Media. This book was released on 2011-06-21 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers fundamental principles and numerical methods relevant to the modeling of the injection molding process. As injection molding processing is related to rheology, mechanical and chemical engineering, polymer science and computational methods, and is a rapidly growing field, the book provides a multidisciplinary and comprehensive introduction to the subjects required for an understanding of the complex process. It addresses the up-to-date status of fundamental understanding and simulation technologies, without losing sight of still useful classical approaches. The main chapters of the book are devoted to the currently active fields of flow-induced crystallization and orientation evolution of fiber suspensions, respectively, followed by detailed discussion of their effects on mechanical property, shrinkage and warpage of injection-molded products. The level of the proposed book will be suitable for interested scientists, R&D engineers, application engineers, and graduate students in engineering.
