Download or read book The Effects of Flexible Manufacturing Contexts written by Clayton Kie and published by Taylor & Francis. This book was released on 1997 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 1997. Routledge is an imprint of Taylor & Francis, an informa company.

Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.

Download or read book Modeling Simulation and Control of Flexible Manufacturing Systems written by MengChu Zhou and published by World Scientific. This book was released on 1999 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: One critical barrier leading to successful implementation of flexible manufacturing and related automated systems is the ever-increasing complexity of their modeling, analysis, simulation, and control. Research and development over the last three decades has provided new theory and graphical tools based on Petri nets and related concepts for the design of such systems. The purpose of this book is to introduce a set of Petri-net-based tools and methods to address a variety of problems associated with the design and implementation of flexible manufacturing systems (FMSs), with several implementation examples.There are three ways this book will directly benefit readers. First, the book will allow engineers and managers who are responsible for the design and implementation of modern manufacturing systems to evaluate Petri nets for applications in their work. Second, it will provide sufficient breadth and depth to allow development of Petri-net-based industrial applications. Third, it will allow the basic Petri net material to be taught to industrial practitioners, students, and academic researchers much more efficiently. This will foster further research and applications of Petri nets in aiding the successful implementation of advanced manufacturing systems.

Download or read book Information Technology for Manufacturing written by National Research Council and published by National Academies Press. This book was released on 1995-02-27 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a vision of manufacturing in the twenty-first century that maximizes efficiencies and improvements by exploiting the full power of information and provides a research agenda for information technology and manufacturing that is necessary for success in achieving such a vision. Research on information technology to support product and process design, shop-floor operations, and flexible manufacturing is described. Roles for virtual manufacturing and the information infrastructure are also addressed. A final chapter is devoted to nontechnical research issues.

Download or read book Productivity Growth and Economic Performance written by J. McCombie and published by Springer. This book was released on 2002-12-17 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of essays on Verdoorn's Law - the relationship between the growth of industrial productivity and output - presents a number of comprehensive surveys and assessments of the vast literature available. The collection not only includes an English translation of Verdoorn's seminal article originally published in Italian, but also new empirical evidence for the Verdoorn Law and new developments in the theoretical modelling of cumulative causation.

Download or read book Logistics of Production and Inventory written by S.C. Graves and published by Elsevier. This book was released on 1993-05-27 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook

Download or read book Dynamic and Seamless Integration of Production Logistics and Traffic written by Eberhard Abele and published by Springer. This book was released on 2016-10-14 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contributes a basic framework for and specific insights into interdisciplinary connections between production, logistics, and traffic subsystems. The book is divided into two parts, the first of which presents an overview of interdisciplinarity in value-added networks and freight traffic. This includes an introduction to the topic and a description of an integrated framework of production, logistics, and traffic. Furthermore, it describes the barriers and challenges of interdisciplinary decision-making and project management. In turn, the second part presents domain-specific perspectives on interdisciplinary decision support, exploring domain-specific challenges of interdisciplinary interfaces and requirements for management methods and instruments from the standpoint of production management, logistics management, traffic management, and information technologies.

Download or read book Accounting in a Business Context written by AIDAN BERRY and ROBIN JARVIS and published by Springer. This book was released on 2013-11-21 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work concentrates on the needs of internal and external users of accounting information, rather than the needs and interests of preparers.

Download or read book Encyclopedia of Technology and Innovation Management written by V. K. Narayanan and published by John Wiley & Sons. This book was released on 2010-03-08 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get complete, up-to-date and authoritative coverage of technology and innovation. A broadly encompassing encyclopedia on the emerging topic of technology innovation and management (TIM), this volume covers a wide array of issues. TIM is a relatively new field and is highly interdisciplinary, incorporating strategy and entrepreneurship, economics, marketing, organizational behavior, organization theory, physical and life sciences, and even law. All of these disciplines are represented in this volume, and their intersections are made clear. Entries are contributed by scholars from around the world who are leading experts in their respective topics. This volume is appropriate for scholars who are new to this particular field, as well as industry practitioners interested in understanding the state of knowledge in these specific areas. Entries may also serve as useful instructional materials, given their span of coverage as well as their currency. Encyclopedia of Technology and Innovation Management has now been adapted and included as the 13th volume of the Wiley Encyclopedia of Management. VK Narayanan is Stubbs Professor of Strategy & Entrepreneurship and Associate Dean of Research at Drexel University, Philadelphia, U.S.A. Gina O'Connor is Associate Professor of Marketing in the Lally School of Management and Technology at Rensselaer Polytechnic Institute, Troy, NY, U.S.A.

Download or read book Employee Relations in Context written by David Farnham and published by CIPD Publishing. This book was released on 2000 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume analyses the issues surrounding employment today and explores the challenges that lie at the heart of the workplace. This second edition has been thoroughly revised and updated

Download or read book Journal of Economic Literature written by and published by . This book was released on 1998 with total page 1382 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reshaping Entrepreneurial Education Within an Industry 4 0 Context written by Naidoo, Vannie and published by IGI Global. This book was released on 2024-01-17 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Higher education is constantly changing and advancing, and the integration of technology and its transformative potential remains elusive for many universities globally. While other industries have surged forward with digitization, higher education has been slow to completely embrace technology-driven outcomes. Reshaping Entrepreneurial Education Within an Industry 4.0 Context sheds light on the barriers preventing widespread technological adoption and the profound changes that Industry 4.0 brings to education. As the fourth industrial revolution, Industry 4.0, continues to unfold, this book delves into how this phenomenon is reshaping the field of education. This book presents a comprehensive analysis of how digital technology and capabilities are becoming integral to building more flexible and adaptive tertiary education systems in regions like Latin America and the Caribbean. It also highlights the challenges faced by online learning and the urgent need for a fundamental rethinking of higher education to ensure equal access to quality education. This publication addresses a diverse audience, making it an essential resource for students, academicians, and higher education administrators seeking an in-depth understanding of Reshaping Entrepreneurial Education Within an Industry 4.0 Context. For practitioners, it provides valuable insights to enrich their work in the realm of higher education. The book covers a broad spectrum of key themes, including the impact of the 4th industrial revolution on entrepreneurial education, the transformative power of online learning in global universities, and the hurdles faced in adopting digital education. Additionally, the experts behind this research delve into how information and communication technologies (ICTs) are influencing educational policies and teaching methods worldwide, as well as the role of metaverse technologies in designing curricula for entrepreneurial education.

Download or read book Advanced Information Systems Engineering Workshops written by Jennifer Horkoff and published by Springer Nature. This book was released on 2022-05-24 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed proceedings of the international workshops associated with the 34th International Conference on Advanced Information Systems Engineering, CAiSE 2022, which was held in Leuven, Belgium, during June 6-10, 2022. The workshops included in this volume are: · BC4IS: Second International Workshop on Blockchain for Information Systems · ISESL: Second International Workshop on Information Systems Engineering for Smarter Life · KET4DF: 4th International Workshop on Key Enabling Technology for Digital Factories They reflect a broad range of topics and trends ranging from blockchain technologies via digital factories, ethics, and ontologies, to the agile methods for business and information systems. The 11 full papers and 1 short paper presented in this book were carefully reviewed and selected from 23 submissions.

Download or read book Flexibility and Lifelong Learning written by Katherine Nicoll and published by Routledge. This book was released on 2006-09-27 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book seeks to develop different approaches to policy analysis through a discursive and rhetorical engagement with the themes of flexibility and lifelong learning.

Download or read book Primate Communication written by Katja Liebal and published by Cambridge University Press. This book was released on 2014 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multimodal approach to primate communication with focus on its cognitive foundations and how this relates to theories of language evolution.

Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2011-09-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is “Enabling Manufacturing Competitiveness and Economic Sustainability”. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems’ economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented.

Download or read book Information Control Problems in Manufacturing Technology 1989 written by E.A. Puente and published by Elsevier. This book was released on 2014-06-28 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Symposium presented and discussed the latest research on new theories and advanced applications of automatic systems, which are developed for manufacturing technology or are applicable to advanced manufacturing systems. The topics included computer integrated manufacturing, simulation and the increasingly important areas of artificial intelligence and expert systems, and applied them to the broad spectrum of problems that the modern manufacturing engineer is likely to encounter in the design and application of increasingly complex automatic systems.