Download or read book The Effect of Creep and Other Time Related Factors on Plastics written by and published by . This book was released on 1991 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Creep and Other Time Related Factors on Plastics and Elastomers written by Laurence W. McKeen and published by Elsevier. This book was released on 2009-06-25 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of the classic data book, The Effect of Creep and Other Time Related Factors on Plastics and Elastomers (originally published in 1991), has been extensively revised with the addition of an abundance of new data, the removal of all out-dated information, and the complete rebuilding of the product and company listings.This new edition also has been reorganized from a polymer chemistry point of view. Plastics of similar polymer types are grouped into chapters, each with an introduction that briefly explains the chemistry of the polymers used in the plastics. An extensive introductory chapter has also been added, which summarizes the chemistry of making polymers, the formulation of plastics, creep-testing, test methods, measurements, and charts, as well as theory and plastic selection.Each chapter is generally organized by product and concludes with comparisons of brand or generic products. The appendices include a list of trade names, plastics sold under those names, and manufacturer. A list of conversion factors for stress measures is also included.ABOUT THE AUTHORLaurence W. McKeen earned a B.S. in Chemistry from Rensselaer Polytechnic Institute in 1973 and a Ph.D. in 1978 from the University of Wisconsin. He began his career with DuPont in 1978 as a mass spectroscopist, but moved into product development in the Teflon® Finishes group in 1980. Dr. McKeen has accumulated over 28 years of experience in product development and applications, working with customers in a wide range of industries, which has led to the creation of dozens of commercial products. More than 8 core chapters, which serve as a databank for evaluating the creep of plastics Over 600 uniform graphs for more than 45 generic families of plastics are explained Types of graphs include: (1) Isochronous Stress–Strain Curves at Various Times and Temperatures (2) Creep Strain or Creep Deformation versus Time at Various Stress Levels and Temperatures (3) Various Modulus Measures (Tensile, Compressive, Flexural) versus Time at Various Temperatures (4) Hoop Stress versus Time at Various Temperatures (5) Stress Cracking and Other Plastics Failure versus Time (6) Creep Rupture versus Time
Download or read book The Effect of Creep and Other Time Related Factors on Plastics written by and published by . This book was released on 1991 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Creep and Other Time Related Factors on Plastics written by and published by . This book was released on 1991 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Creep and Other Time Related Factors on Plastics written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Creep and Other Time Related Factors on Plastics written by Plastics Design Library and published by William Andrew. This book was released on 1991 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents curve types for generic families of plastics. It provides test conditions, including temperature and applied stress, and contains creep property data for the following stress types: tension, flexure, impact, torsion, and compression. Data are compiled from various published and limited distribution sources, including commercial catalogs, journal articles, technical reports, materials information sheets, etc. Most of the test data is produced by the material manufacturers.
Download or read book Effects of Creep and Other Time Related Factors on Plastics written by and published by . This book was released on 1993 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Creep and Other Related Factors on Plastics written by Plastics Design Library (New York, N.Y.) and published by . This book was released on 1991 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Temperature and other Factors on Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2014-04-15 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference guide brings together a wide range of critical data on the effect of temperature on plastics and elastomers, enabling engineers to make optimal material choices and design decisions. The effects of humidity level and strain rate on mechanical and electrical properties are also covered. The data are supported by explanations of how to make use of the data in real world engineering contexts.High (and low) temperatures can have a significant impact on plastics processing and applications, particularly in industries such as automotive, aerospace, oil and gas, packaging, and medical devices, where metals are increasingly being replaced by plastics. Additional plastics have also been included for polyesters, polyamides and others where available, including polyolefins, elastomers and fluoropolymers. Entirely new sections on biodegradable polymers and thermosets have been added to the book. The level of data included – along with the large number of graphs and tables for easy comparison – saves readers the need to contact suppliers, and the selection guide has been fully updated, giving assistance on the questions which engineers should be asking when specifying materials for any given application. Trustworthy, current thermal data and best practice guidance for engineers and materials scientists in the plastics industry More than 1,000 graphs and tables allow for easy comparison between plastics Entirely new sections added on biopolymers and thermosets
Download or read book Handbook of Thermoplastic Fluoropolymers written by Laurence W. McKeen and published by William Andrew. This book was released on 2023-04-15 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermoplastic Fluoropolymers: Properties, Characteristics and Data gathers key technical information about structure, characteristics, properties and processing methods of commercial thermoplastic fluoropolymers in one easy reference. Thermoplastic fluoropolymers have many desirable functional characteristics, such as high thermal stability, reliability at high mechanical loads, a wide range of operating temperatures, and high chemical and radiation stability. These characteristics make them crucial in many specialist applications, including in the military, biopharmaceuticals and environmental protection. This uniquely comprehensive guide to this versatile family of polymers will help processors, fabricators and end-users find new and innovative solutions.Detailed coverage of technical details of processing methods, characteristics, and chemical properties of commercial thermoplastic fluoropolymers all in one place make this the most authoritative reference to the subject available. Includes extensive physical and mechanical property data for commercial thermoplastic fluoropolymers Provides comprehensive chemical resistance data for commercial thermoplastic fluoropolymers Explains the basics of fluoropolymers for readers with different backgrounds
Download or read book Finite Element Modeling of Textiles in AbaqusTM CAE written by Izabela Ciesielska-Wrobel and published by CRC Press. This book was released on 2019-07-26 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of the book is to provide engineers with a practical guide to Finite Element Modelling (FEM) in Abaqus CAE software. The guide is in the form of step-by-step procedures concerning yarns, woven fabric and knitted fabrics modelling, as well as their contact with skin so that the simulation of haptic perception between textiles and skin can be
Download or read book Effect of Creep written by William Woishnis and published by Plastics Design Library. This book was released on 1993-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: What is the minimum amount of materials needed to meet your performance requirements? How much will the dimensions of a part change when loaded for a specified time at a given temperature? Engineers and designers will find the answers to these important questions in The Effect of Creep and Other Time Related Factors on Plastics. This is the only single reference that shows the effect of creep and time. A databank of material constants used in engineering design equations - substituting time/temperature dependent apparent modulus for elastic modulus in standard engineering equations will allow prediction of the effects of creep and stress relaxation.
Download or read book Advanced Applications of Biobased Materials written by Shakeel Ahmed and published by Elsevier. This book was released on 2023-03-01 with total page 820 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Applications of Biobased Materials: Food, Biomedical, and Environmental Applications brings together cutting-edge developments in the preparation and application of biobased materials. This book begins by providing an overview of biobased materials, their classification, and their physical and chemical modifications. This is followed by a section covering the latest techniques in fabrication, processing, and characterization. Subsequent chapters are grouped by application area, offering insights into advanced and emerging utilizations of biobased materials in food, biomedical, environmental, and other industrial applications. The final part of the book highlights other key considerations, including life cycle assessment, circular economy, sustainability, and future potential. Presents processing methods, characterization techniques, and the latest advances in biobased materials Focuses on advanced and emerging applications of biobased materials in three key areas – food, biomedicine and the environment Considers sustainability issues relating to biobased materials, including environmental impact, lifecycle assessment and the circular economy
Download or read book Volume 1 Book B written by and published by . This book was released on 1991 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue and Tribological Properties of Plastics and Elastomers written by Laurence W. McKeen and published by William Andrew. This book was released on 2016-03-31 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of a series of data-rich handbooks within the Plastics Design Library, Fatigue and Tribological Properties of Plastics and Elastomers provides a comprehensive collection of graphical multipoint data and tabular data covering the fatigue and tribological performance of plastics. The handbook is structured by grouping together plastics of similar polymer types into ten chapters. Each of these chapters is split into two sections: Fatigue Properties and Tribological Properties, and together they provide a compendium of several hundred graphs and charts, supplying the core data needed by engineers and scientists on a day-to-day basis. The data for this third edition has been updated to cover upwards of five years since the previous edition was published, and also includes an entirely new chapter covering sustainable and biodegradable polymers. The book also includes an extensive introductory section covering fatigue, what it is and how it is measured; the fundamentals of tribology; polymer chemistry and plastics composition. These chapters also provide readers with a full understanding of the data section, and how to put it to use as a hard-working information tool.
Download or read book Bio Based Plant Oil Polymers and Composites written by Samy Madbouly and published by William Andrew. This book was released on 2015-08-27 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bio-based Plant Oil Polymers and Composites provides engineers and materials scientists a useful framework to help take advantage of the latest research conducted in this rapidly advancing field—enabling them to develop and commercialize their own products quickly and more successfully. Plant oil is one of the most attractive options as a substitute for non-renewable resources in polymers and composites, and is producing materials with very promising thermomechanical properties relative to traditional, petroleum-based polymers. In addition to critical processing and characterization information, the book assists engineers in deciding whether or not they should use a plant oil-based polymer over a petroleum-based polymer, discussing sustainability concerns, biodegradability, associated costs, and recommended applications. The book details the advancements in the development of polymeric materials and composites from plant oils, and provides a critical review of current applications in various fields, including packaging, biomedical, and automotive applications. Also includes the latest progress in developing multifunctional biobased polymers—by increasing thermal conductivity or adding antibacterial properties, for example. Essential coverage of processing, characterization, and the latest research into polymeric materials and composites derived from plant oils (thermoplastics, thermosets, nanocomposites, and fiber reinforced composites) Critically reviews the potential applications of plant oil-based polymers, including sensors, structural parts, medical devices, and automotive interiors Includes the latest developments in multifunctional bio-based polymer composites
Download or read book Fluoropolymer Applications in the Chemical Processing Industries written by Sina Ebnesajjad and published by William Andrew. This book was released on 2004-12-02 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a self-contained collection of data and information on applications of fluoropolymers components for corrosion control in chemical processing industries. Due to their superior properties, fluoropolymers have been rapidly replacing metal alloys for preserving the purity of processing streams in the chemical processing, plastics, food, pharmaceutical, semiconductor, and pulp and paper industries.