Download or read book Mathematical Modelling of Gas Phase Complex Reaction Systems Pyrolysis and Combustion written by and published by Elsevier. This book was released on 2019-06-06 with total page 1036 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling of Gas-Phase Complex Reaction Systems: Pyrolysis and Combustion, Volume 45, gives an overview of the different steps involved in the development and application of detailed kinetic mechanisms, mainly relating to pyrolysis and combustion processes. The book is divided into two parts that cover the chemistry and kinetic models and then the numerical and statistical methods. It offers a comprehensive coverage of the theory and tools needed, along with the steps necessary for practical and industrial applications. - Details thermochemical properties and "ab initio" calculations of elementary reaction rates - Details kinetic mechanisms of pyrolysis and combustion processes - Explains experimental data for improving reaction models and for kinetic mechanisms assessment - Describes surrogate fuels and molecular reconstruction of hydrocarbon liquid mixtures - Describes pollutant formation in combustion systems - Solves and validates the kinetic mechanisms using numerical and statistical methods - Outlines optimal design of industrial burners and optimization and dynamic control of pyrolysis furnaces - Outlines large eddy simulation of turbulent reacting flows
Download or read book Joint Meeting of the U S Sections of the Combustion Institute Western States Central States Eastern States written by and published by . This book was released on 2005 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Homogeneous Charge Compression Ignition Engines 2007 written by and published by . This book was released on 2007 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Combustion Processes written by Sara McAllister and published by Springer Science & Business Media. This book was released on 2011-05-10 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Combustion Processes is designed as a textbook for an upper-division undergraduate and graduate level combustion course in mechanical engineering. The authors focus on the fundamental theory of combustion and provide a simplified discussion of basic combustion parameters and processes such as thermodynamics, chemical kinetics, ignition, diffusion and pre-mixed flames. The text includes exploration of applications, example exercises, suggested homework problems and videos of laboratory demonstrations
Download or read book The Shock Tube in High Temperature Chemical Physics written by Alfred Gordon Gaydon and published by . This book was released on 2013-03 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Motor Gasolines written by and published by . This book was released on 1975 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuel Engine Interactions written by Gautam Kalghatgi and published by SAE International. This book was released on 2013-10-08 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: Conventional fossil fuels will constitute the majority of automotive fuels for the foreseeable future but will have to adapt to changes in engine technology. Unconventional transport fuels such as biofuels, gas-to-liquid fuels, compressed natural gas, and liquid petroleum gas will also play a role. Hydrogen might be a viable transport fuel if it overcomes barriers in production, transport, storage, and safety and/or if fuel cells become viable. This book opens by considering these issues and then introduces practical transport fuels. A chapter on engine deposits follows, which is an important practical topic about how fuels affect engines that is not usually considered in other books. The next three chapters discuss auto-ignition phenomena in engines. The auto-ignition resistance of fuels is the most important fuel property since it limits the efficiency of spark ignition engines and determines the performance of compression ignition engines. Moreover, the manufacture of fuels is primarily driven by the need to meet auto-ignition quality demands set by fuel specifications. The final chapter considers the implications for future fuels. The book covers the many important ways that fuels and engines interact and why and how fuels will need to change to meet the requirements of future engines, as well as the implications for fuels manufacture and specifications.
Download or read book Handbook of Bond Dissociation Energies in Organic Compounds written by Yu-Ran Luo and published by CRC Press. This book was released on 2002-12-26 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: So many compounds, so many experiments reported by so many researchers using so many methods Finding reliable data on bond dissociation energies (BDEs) can be like looking for a needle in a haystack. But these data are crucial to work in chemical kinetics, free radical chemistry, organic thermochemistry, and physical organic chemistry-so where does
Download or read book Combustion Chemistry written by W. C. Jr. Gardiner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detailed study of the rates and mechanisms of combustion reactions has not been in the mainstream of combustion research until the recent recognition that further progress in optimizing burner performance and reducing pollutant emission can only be done with fundamental understanding of combustion chemistry. This has become apparent at a time when our understanding of the chemistry, at least of small-molecule combustion, and our ability to model combustion processes on large computers have developed to the point that real confidence can be placed in the results. This book is an introduction for outsiders or beginners as well as a reference work for people already active in the field. Because the spectrum of combustion scientists ranges from chemists with little computing experience to engineers who have had only one college chemistry course, everything needed to bring all kinds of beginners up to the level of current practice in detailed combustion modeling is included. It was a temptation to include critical discussions of modeling results and computer programs that would enable outsiders to start quickly into problem solving. We elected not to do either, because we feel that the former are better put into the primary research literature and that people who are going to do combustion modeling should either write their own programs or collaborate with experts. The only exception to this is in the thermochemical area, where programs have been included to do routine fitting operations. For reference purposes there are tables of thermochemical, transport-property, and rate coefficient data.
Download or read book Lubricants and Lubrication 2 Volume Set written by Theo Mang and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 1220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the previous edition: "Contains something for everyone involved in lubricant technology." —Chemistry & Industry This completely revised third edition incorporates the latest data available and reflects the knowledge of one of the largest companies active in the business. The authors take into account the interdisciplinary character of the field, considering aspects of engineering, materials science, chemistry, health and safety. The result is a volume providing chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, focusing not only on the various products but also on specific application engineering criteria. A classic reference work, completely revised and updated (approximately 35% new material) focusing on sustainability and the latest developments, technologies and processes of this multi billion dollar business Provides chemists and engineers with a clear interdisciplinary introduction and guide to all major lubricant applications, looking not only at the various products but also at specific application engineering criteria All chapters are updated in terms of environmental and operational safety. New guidelines, such as REACH, recycling alternatives and biodegradable base oils are introduced Discusses the integration of micro- and nano-tribology and lubrication systems Reflects the knowledge of Fuchs Petrolub SE, one of the largest companies active in the lubrication business 2 Volumes wileyonlinelibrary.com/ref/lubricants
Download or read book Low temperature Combustion and Autoignition written by M.J. Pilling and published by Elsevier. This book was released on 1997-11-27 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion has played a central role in the development of our civilization which it maintains today as its predominant source of energy. The aim of this book is to provide an understanding of both fundamental and applied aspects of low-temperature combustion chemistry and autoignition. The topic is rooted in classical observational science and has grown, through an increasing understanding of the linkage of the phenomenology to coupled chemical reactions, to quite profound advances in the chemical kinetics of both complex and elementary reactions. The driving force has been both the intrinsic interest of an old and intriguing phenomenon and the centrality of its applications to our economic prosperity. The volume provides a coherent view of the subject while, at the same time, each chapter is self-contained.
Download or read book Molecular Structure Description written by Lemont Burwell Kier and published by . This book was released on 1999 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The electrotopological state is a new approach to defining key structural features of a molecule in drug design. Combining both electronic and topological attributes, the E-State index facilitates the development of a structure - activity model, the definition of a pharmacophore, and the search through a database for similar or dissimilar compounds. The background for the method, the concept of the intrinsic state, and the E-State index as a function of the atom or group within the field of all atoms in a molecule are all described in this primer for a new structure paradigm. Software on the bundled CD-ROM allows the reader to compute and display the E-State indices for molecules, while examples in the book illustrate strategies that can be used in drug research.
Download or read book Chemistry and Technology of Lubricants written by R. M. Mortier and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use oflubricants began in ancient times and has developed into a major international business through the need to lubricate machines of increasing complexity. The impetus for lubricant development has arisen from need, so lubricatingpractice has precededan understandingofthescientificprinciples. This is not surprising as the scientific basis of the technology is, by nature, highly complex and interdisciplinary. However, we believe that the under standing of lubricant phenomena will continue to be developed at a mol ecular level to meet future challenges. These challenges will include the control of emissions from internal combustion engines, the reduction of friction and wear in machinery, and continuing improvements to lubricant performanceand life-time. More recently, there has been an increased understanding ofthe chemical aspects of lubrication, which has complemented the knowledge and under standing gained through studies dealing with physics and engineering. This book aims to bring together this chemical information and present it in a practical way. It is written by chemists who are authorities in the various specialisations within the lubricating industry, and is intended to be of interest to chemists who may already be working in the lubricating industry or in academia, and who are seeking a chemist's view of lubrication. It will also be of benefit to engineers and technologists familiar with the industry who requirea more fundamental understanding oflubricants.
Download or read book OntoCAPE written by Wolfgang Marquardt and published by Springer Science & Business Media. This book was released on 2009-12-16 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Motivation for this Book Ontologies have received increasing attention over the last two decades. Their roots can be traced back to the ancient philosophers, who were interested in a c- ceptualization of the world. In the more recent past, ontologies and ontological engineering have evolved in computer science, building on various roots such as logics, knowledge representation, information modeling and management, and (knowledge-based) information systems. Most recently, largely driven by the next generation internet, the so-called Semantic Web, ontological software engineering has developed into a scientific field of its own, which puts particular emphasis on the theoretical foundations of representation and reasoning, and on the methods and tools required for building ontology-based software applications in diverse domains. Though this field is largely dominated by computer science, close re- tionships have been established with its diverse areas of application, where - searchers are interested in exploiting the results of ontological software engine- ing, particularly to build large knowledge-intensive applications at high productivity and low maintenance effort. Consequently, a large number of scientific papers and monographs have been p- lished in the very recent past dealing with the theory and practice of ontological software engineering. So far, the majority of those books are dedicated to the th- retical foundations of ontologies, including philosophical treatises and their re- tionships to established methods in information systems and ontological software engineering.
Download or read book Application of Intelligent Systems in Multi modal Information Analytics written by Vijayan Sugumaran and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diesel Fuel Oils written by and published by . This book was released on 1960 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 30th European Symposium on Computer Aided Chemical Engineering written by Sauro Pierucci and published by Elsevier. This book was released on 2020-10-23 with total page 2119 pages. Available in PDF, EPUB and Kindle. Book excerpt: 30th European Symposium on Computer Aided Chemical Engineering, Volume 47 contains the papers presented at the 30th European Symposium of Computer Aided Process Engineering (ESCAPE) event held in Milan, Italy, May 24-27, 2020. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries. - Presents findings and discussions from the 30th European Symposium of Computer Aided Process Engineering (ESCAPE) event - Offers a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries
