Download or read book The Design of High Performance Mechatronics written by R MUNNING SCHMIDT and published by . This book was released on 2020-02-05 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives.This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS.As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, this book includes an overview of systems engineering, optics and precision measurement systems, in an attempt to establish a connection between these fields under one umbrella.Robert Munnig Schmidt is emeritus professor in Mechatronic System Design at Delft University of Technology with industrial experience at Philips and ASML in research and development of consumer and high-tech systems. He is also director of RMS Acoustics & Mechatronics, doing research and development on active controlled low frequency sound systems.Georg Schitter is professor at the Automation and Control Institute (ACIN) at Vienna University of Technology with a standing track record in research on the control and mechatronic design of extremely fast precision motion systems such as video rate AFM systems.Adrian Rankers is managing partner of Mechatronics Academy, developing and delivering high level courses to the industrial community, based on industrial experience at Philips in the research and development of consumer and high-tech systems. He also teaches Mechatronics at the Eindhoven University of Technology.Jan van Eijk is emeritus professor in Advanced Mechatronics at Delft University of Technology. He is also director of MICE BV and partner at Mechatronics Academy, acting as industrial R&D advisor and teacher with experience at Philips in the research and development of consumer and high-tech systems.
Download or read book The Design of High Performance Mechatronics 2nd Revised Edition written by R. Munnig Schmidt and published by IOS Press. This book was released on 2014-01-08 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives. This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS. As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, this book includes an overview of systems engineering, optics and precision measurement systems, in an attempt to establish a connection between these fields under one umbrella. Robert Munnig Schmidt is professor in Mechatronic System Design at Delft University of Technology with industrial experience at Philips and ASML in research and development of consumer and high-tech systems. He is also director of RMS Acoustics & Mechatronics, doing research and development on active controlled low frequency sound systems. Georg Schitter is professor at the Automation and Control Institute (ACIN) at Vienna University of Technology with a standing track record in research on the control and mechatronic design of extremely fast precision motion systems such as video rate AFM systems. Adrian Rankers is managing partner of Mechatronics Academy, developing and delivering high level courses to the industrial community, based on industrial experience at Philips in the research and development of consumer and high-tech systems. Jan van Eijk is emeritus professor in Advanced Mechatronics at Delft University of Technology. He is also director of MICE BV and partner at Mechatronics Academy, acting as industrial R&D advisor and teacher with experience at Philips in the research and development of consumer and high-tech systems.
Download or read book The Design of High Performance Mechatronics written by Robert Munnig Schmidt and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Design of High Performance Mechatronics 3rd Revised Edition written by R. Munnig Schmidt and published by IOS Press. This book was released on 2020-02-05 with total page 949 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives. This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS. As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, this book includes an overview of systems engineering, optics and precision measurement systems, in an attempt to establish a connection between these fields under one umbrella. Robert Munnig Schmidt is emeritus professor in Mechatronic System Design at Delft University of Technology with industrial experience at Philips and ASML in research and development of consumer and high-tech systems. He is also director of RMS Acoustics & Mechatronics, doing research and development on active controlled low frequency sound systems. Georg Schitter is professor at the Automation and Control Institute (ACIN) at Vienna University of Technology with a standing track record in research on the control and mechatronic design of extremely fast precision motion systems such as video rate AFM systems. Adrian Rankers is managing partner of Mechatronics Academy, developing and delivering high level courses to the industrial community, based on industrial experience at Philips in the research and development of consumer and high-tech systems. He also teaches Mechatronics at the Eindhoven University of Technology. Jan van Eijk is emeritus professor in Advanced Mechatronics at Delft University of Technology. He is also director of MICE BV and partner at Mechatronics Academy, acting as industrial R&D advisor and teacher with experience at Philips in the research and development of consumer and high-tech systems.
Download or read book The Design of High Performance Mechatronics written by Robert Munnig Schmidt and published by IOS Press under the. This book was released on 2011 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since they entered our world around the middle of the 20th century, the application of mechatronics has enhanced our lives with functionality based on the integration of electronics, control systems and electric drives. This book deals with the special class of mechatronics that has enabled the exceptional levels of accuracy and speed of high-tech equipment applied in the semiconductor industry, realising the continuous shrink in detailing of micro-electronics and MEMS. As well as the more frequently presented standard subjects of dynamics, motion control, electronics and electromechanics, thi.
Download or read book Advances in High Performance Motion Control of Mechatronic Systems written by Takashi Yamaguchi and published by CRC Press. This book was released on 2013-07-23 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronic systems are used in a range of consumer products from large-scale braking systems in vehicular agents to small-scale integrated sensors in mobile phones. To keep pace in the competitive consumer electronics industry, companies need to continuously improve servo evaluation and position control of these mechatronic systems. Advances in High-Performance Motion Control of Mechatronic Systems covers advanced control topics for mechatronic applications. In particular, the book examines control systems design for ultra-fast and ultra-precise positioning of mechanical actuators in mechatronic systems. The book systematically describes motion control design methods for trajectory design, sampled-data precise positioning, transient control using switching control, and dual-stage actuator control. Each method is described in detail, from theoretical aspects to examples of actual industry applications including hard disk drives, optical disk drives, galvano scanners, personal mobility robots, and more. This helps readers better understand how to translate control theories and algorithms from theory to design and implementation in realistic engineering systems. The book also identifies important research directions and advanced control techniques that may provide solutions for the next generation of high-performance mechatronics. Bridging research and industry, this book presents state-of-the-art control design methodologies that are widely applicable to industries such as manufacturing, robotics, home appliances, automobiles, printers, and optical drives. It guides readers toward more effective solutions for high-performance mechatronic systems in their own products.
Download or read book Electromechanical Coupling Theory Methodology and Applications for High Performance Microwave Equipment written by Baoyan Duan and published by John Wiley & Sons. This book was released on 2022-12-08 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book of its kind to focus on the coupling theory, methodology and applications of microwave equipment Electromechanical Coupling Theory, Methodology and Applications for High-Performance Microwave Equipment is an authoritative and up-to-date guide to the structural, mechanical, and electrical aspects of electromechanical coupling. Addressing control, electromagnetism, and structural engineering, this comprehensive reference addresses the electromechanical coupling of high-performance microwave electronic equipment (MEE), such as antennas, radar, large radio telescopes, and telecommunication and navigation equipment. The book is divided into four main sections, beginning with an introduction to electromechanical coupling (EMC) theory and a detailed description of the multi-field coupling model (MFCM) and the influence mechanism (IM) of nonlinear factors of antenna-servo-feeder systems on performance. Subsequent sections discuss MFCM- and IM-based design methodology, EMC-based measurement and testing, computer software for coupling analysis and design of electronic equipment, and various engineering applications of EMC theory and the IM of typical electronic equipment. In addition, the book: Discusses information and data transfer in electromagnetic fields, mechanical and structural deformation fields, and temperature fields Explains how high-performance microwave electronic equipment differs from traditional mechanical equipment Addresses EMC-based and general design-vector based optimization of electronic equipment design Describes applications such as a gun-guided radar system for warships and a large-diameter antenna for moon exploration Includes evaluation criteria to validate MFCM/IM design theory and methodology Electromechanical Coupling Theory, Methodology and Applications for High-Performance Microwave Equipment is essential reading for circuit designers, microwave engineers, researchers working with high-frequency microwave engineering, and engineers working with integrated circuits in radar, communications, IoT, antenna engineering, and remote sensing.
Download or read book Advances in High Performance Motion Control of Mechatronic Systems written by Takashi Yamaguchi and published by CRC Press. This book was released on 2017-12-19 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronic systems are used in a range of consumer products from large-scale braking systems in vehicular agents to small-scale integrated sensors in mobile phones. To keep pace in the competitive consumer electronics industry, companies need to continuously improve servo evaluation and position control of these mechatronic systems. Advances in High-Performance Motion Control of Mechatronic Systems covers advanced control topics for mechatronic applications. In particular, the book examines control systems design for ultra-fast and ultra-precise positioning of mechanical actuators in mechatronic systems. The book systematically describes motion control design methods for trajectory design, sampled-data precise positioning, transient control using switching control, and dual-stage actuator control. Each method is described in detail, from theoretical aspects to examples of actual industry applications including hard disk drives, optical disk drives, galvano scanners, personal mobility robots, and more. This helps readers better understand how to translate control theories and algorithms from theory to design and implementation in realistic engineering systems. The book also identifies important research directions and advanced control techniques that may provide solutions for the next generation of high-performance mechatronics. Bridging research and industry, this book presents state-of-the-art control design methodologies that are widely applicable to industries such as manufacturing, robotics, home appliances, automobiles, printers, and optical drives. It guides readers toward more effective solutions for high-performance mechatronic systems in their own products.
Download or read book Total Design written by Stuart Pugh and published by Prentice Hall. This book was released on 1991 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based around a core of design activities, this book presents the design function as a systematic and disciplined process, the objective of which is to create innovative products that satisfy customer needs. The author is widely regarded as a foremost authority on an integrated approach to product engineering. Highly suitable for all students in engineering, industrial design, architecture and computer science, as well as for the professional engineer and designer who will find in it a very useful framework to assist their design practice.
Download or read book Mechanical Design of Machine Components written by Ansel Ugural and published by CRC Press. This book was released on 2015-01-08 with total page 1009 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Design of Machine Components, Second Edition strikes a balance between theory and application, and prepares students for more advanced study or professional practice. It outlines the basic concepts in the design and analysis of machine elements using traditional methods, based on the principles of mechanics of materials. The text combine
Download or read book Mechatronic Systems written by Mohamed Arezki Mellal and published by Nova Science Publishers. This book was released on 2018 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decade, mechatronic systems have been found in many things and many experiences of our everyday lives. The word �mechatronics� was first used by the engineer Tetsuro Mori in Japan in 1969. Mechatronics is a multidisciplinary area of study combining mechanics, electronics, computers and automation. A synergistic collaboration among these fields of science involves a high potential for accomplishments and achievements now accessible to a wide variety of engineers. Mechatronic Systems: Design, Performance and Applications is a source of the latest research and technical notes in mechatronics. This book is useful for students, researchers, and all readers interested in this topic.
Download or read book Mechatronics and Dynamic System Design 3rd Edition written by Andy Judge and published by Lulu.com. This book was released on 2019-10-22 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechatronics and Dynamic System Design A practical textbook of moving system design for Mechanical Engineers
Download or read book Green Manufacturing Mechanical and Automation Engineering written by Xi Long Qu and published by Trans Tech Publications Ltd. This book was released on 2013-07-15 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 3rd International Conference on Mechanical Engineering and Green Manufacturing 2013 (MEGM2013), March 22-24, 2013, Chongqing, China. The 214 papers are grouped as follows: Chapter 1: Mechanical Engineering; Chapter 2: Applied Mechanics, Vibration and Friction; Chapter 3: Engineering for Green Manufacturing, Supply Chain Management, Decision-Making Technologies and Industry; Chapter 4: New and Sustainable Materials Engineering; Chapter 5: Methodology, Devices and Instruments, Measure and Diagnosis, Evaluation and Testing; Chapter 6: Mechatronics, Automation, Control, Net and Information Technologies, Simulation and Modelling; Chapter 7: Green Power and Environment Engineering.
Download or read book Vehicle Mechatronics and Information Technologies written by X.D. Yu and published by Trans Tech Publications Ltd. This book was released on 2013-08-30 with total page 5174 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 2013 International Conference on Vehicle & Mechanical Engineering and Information Technology (VMEIT 2013), August 17-18, 2013, Zhengzhou, Henan, China. The 1094 papers are grouped as follows: Chapter 1: Design and Researches in Area of Vehicle and General Mechanical Engineering; Chapter 2: Mechatronics, Automation and Control; Chapter 3: Measurement and Instrumentation, Monitoring and Detection Technologies, Fault Diagnosis; Chapter 4: Computation Methods and Algorithms for Modeling, Simulation and Optimization, Data Mining and Data Processing; Chapter 5: Information Technologies, WEB and Networks Engineering, Information Security, Software Application and Development; Chapter 6: Power and Electric Systems, Electronics and Microelectronics, Embedded and Integrated Systems; Chapter 7: Communication, Signal and Image Processing, Data Acquisition, Identification and Recognition Technologies; Chapter 8: Information Technologies in Urban and Civil Engineering, Medicine and Biotechnology; Chapter 9: Material Science and Manufacturing Technology; Chapter 10: Information Technology in Management Engineering, Logistics, Economics, Finance, Assessment; Chapter 11: Related Themes.
Download or read book Electronic Product Design written by A. E. Ward and published by . This book was released on 1996 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechatronics the Basis for New Industrial Development written by Memis̜ Acar and published by Computational Mechanics. This book was released on 1994 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Essentials of Mechatronics written by John Billingsley and published by John Wiley & Sons. This book was released on 2006-05-11 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to study, analyze, select, and design a successful mechatronic product This innovative, cutting-edge publication presents the essential nature of mechatronics, a field at the crossroads of information technology and mechanical and electrical engineering. Readers learn how to blend mechanisms, electronics, sensors, control strategies, and software into a functional design. Given the breadth that the field of mechatronics draws upon, this publication provides a critical service to readers by paring down the topics to the most essential ones. A common thread throughout the publication is tailoring performance to the actual needs of the user, rather than designing "by the book." Practical methods clarify engineering trade-offs needed to design and manufacture competitive state-of-the-art products and systems. Key features include: * Easy-to-construct set of laboratory experiments to give readers practice in controlling difficult systems using discrete-time algorithms * Essentials of control theory, concentrating on state-space and easily constructed simulations in JavaScript, including typical mechatronic systems with gross nonlinearities where linear methods give the "wrong answer" * Hot topics that include advances in the automotive, multimedia, robotics, defense, medical, and consumer industries * Author-provided Web site at www.EssMech.com offers additional resources, including videos, dynamic simulation examples, software tools, and downloads There are hundreds of choices involved in all but the simplest of mechatronic design tasks. Using this publication as a reference, electrical, mechanical, and computer designers and engineers can find the most efficient, cost-effective methods to transform their goals into successful commercial products. With its use of laboratory experiments, this publication is also recommended as a graduate-level textbook. Author Web site located at www.EssMech.com provides in-depth support material that includes links to simulations for modeling dynamic systems with real-time interactions, image processing examples, and 3D robot modeling software, enabling readers to "construct" and manipulate their own mechanism as well as other useful links.