Download or read book The Corrosion Behavior of Titanium Alloys in Chloride Solutions Materials for Surgical Implants written by Milton Levy and published by . This book was released on 1972 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Y FLUIDS, MECHANICAL PROPERTIES, TEST METHODS, HEAT TREATMENT, ALUMINUM ALLOYS, MOLYBDENUM ALLOYS, SURGERY, VANADIUM ALLOYS, TIN ALLOYS, YIELD POINTBIOLOGICAL MATERIAL, SALT WATER, TITANIUM ALLOY 8AL 1MO 1V, TITANIUM ALLOY 6AL 2SN 6VBecause certain titanium alloys are of interest as surgical implants, the corrosion behavior of alloys Ti-8Al-1Mo-1V in both the single and duplex annealed conditions and Ti-6Al-6V-2Sn at yield strength levels of 140, 160, and 180 ksi were studied in 0.17M sodium chloride solution (the approximate NaCl concentration in blood, plasma, and lymph) and Hanks's physiological solution (a fairly close imitation, from the chemical viewpoint, of the fluid in muscle and bone) at a temperature of 37 C by electrochemical means, i.e., potential-time, anodic polarization, current density-time for the anodes under potentiostatic control at the equilibrium potential. Electrochemical measurements were made with these alloys in both the unstressed and stressed conditions, and then under conditions of cyclic stress. (Author).
Download or read book Titanium Alloys in Surgical Implants written by Symposium on Titanium Alloys in Surgical Implants and published by ASTM International. This book was released on 1983 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Surface Preparation and Corrosion Behavior of Titanium Alloys for Surgical Implants written by AC. Fraker and published by . This book was released on 1983 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface preparation and corrosion behavior of titanium alloys were studied; both topics deal with the formation of surface oxide films. When metals are prepared for surgical implant use, an effort is made to produce an optimum surface. Effects of the surface treatments on surface morphology, surface film composition, and structure are shown in transmission electron photomicrographs and electron diffraction patterns. Roughened surfaces were produced, and surface films of titanium oxide (TiO) or titanium dioxide (TiO2) or both occurred on some specimens. Sodium titanate (NaO . xTiO2) occurred on the specimens washed in sodium hydroxide (NaOH) solution.
Download or read book Corrosion of Titanium written by J. D. Jackson and published by . This book was released on 1966 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium and Titanium Alloys written by and published by . This book was released on 1974 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion and Degradation of Implant Materials written by B. C. Syrett and published by ASTM International. This book was released on 1979 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1973 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Alloys as Implant Materials written by AC. Fraker and published by . This book was released on 1996 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys are prominent as dental and orthopedic materials because of their high strength-to-weight ratio, lower elastic modulus, excellent corrosion resistance and apparent biocompatibility. Based on microstructures that can be produced by alloying, titanium alloys are grouped as alpha, alpha-beta and beta alloys. Alpha titanium and alpha-beta alloys have been used for dental and orthopedic purposes. Beta titanium alloys are being considered as candidate materials for implant applications because of their ease of formability, increased strength and lower elastic modulus, in spite of increased cost. Studies show the presence of the omega phase in the beta alloy, Ti-15Mo-2.8Nb, in the unaged condition. Comparison of corrosion behavior of this alloy with the alloy Ti-6Al-4V shows the two alloys have comparable corrosion resistance in simulated physiological solution. A review and data are presented along with a discussion of the influence of composition, heat treatment and microstructure on mechanical properties and corrosion behavior of titanium alloys, in general, and of beta alloys, in particular.
Download or read book Report on the Stress Corrosion and Pyrophoric Behavior of Titanium and Titanium Alloys written by D. W. Stough and published by . This book was released on 1957 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Science and Technology written by H. Burte and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bioscience and Bioengineering of Titanium Materials written by Yoshiki Oshida and published by Elsevier. This book was released on 2010-07-07 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique book about bioscience and the bioengineering of titanium materials is based on more than 1,000 published articles. It bridges the gap between the medical/dental fields and the engineering/technology areas, due to the author's unique experience in both during the last 30 years. The book covers Materials Classifications, Chemical and Electrochemical Reactions, Oxidation, Biological Reactions, Implant-related Biological Reactions, Applications, Fabri-cation Technologies, Surface Modifications, and Future Perspectives.* Provides quick access to the primary literature in this field* Reviews studies of titanium materials in medical and dental applications, as reported in nearly 1,500 articles published over last several years* Draws information from several types of studies and reports* Helps readers answer questions about the most appropriate materials and when to use them
Download or read book Titanium and its Alloys written by Janina Adamus and published by Trans Tech Publications Ltd. This book was released on 2016-04-21 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the 12th National Scientific Conference Ti-2015 contains 35 peer-reviewed articles from 16 Polish scientific centres which cover a wide range of basic and applied aspects of the research, modelling, processing and application of titanium and its alloys. The conference Titanium and its alloys is biannual national conference that has been held in Poland since 1990. It is an occasion to bring together scientists and practitioners, exchange their knowledge and experiences. The aim of the proceedings is to develop and promote the use of titanium in technology and medicine. The presented contributions cover these main topics: - Forming the structure and microstructure of titanium materials as well as their physical, chemical and mechanical properties - Surface engineering, advanced technologies of surface and thermo-plastic treatment
Download or read book Medical Applications of Titanium and Its Alloys written by Jack E. Lemons and published by ASTM International. This book was released on 1996 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thirty papers presented at a 1994 symposium cover the basic materials science issues regarding the processing of titanium alloys, and the controversy regarding their use in medicine. Coverage includes orthopaedic, dental, and cardiovascular applications, with a primary focus on the orthopaedic. Info
Download or read book Aerospace Structural Metals Handbook written by and published by . This book was released on 1989 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Properties Handbook written by Gerhard Welsch and published by ASM International. This book was released on 1993-12-31 with total page 1206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive datasheets on more than 60 titanium alloys More than 200 pages on metallurgy and fabrication procedures Input from more than 50 contributors from several countries Careful editorial review for accuracy and usefulness. Materials Properties Handbook: Titanium Alloys provides a data base for information on titanium and its alloys, and the selection of specific alloys for specific applications. The most comprehensive titanium data package ever assembled provides extensive information on applications, physical properties, corrosion, mechanical properties (including design allowances where available), fatigue, fracture properties, and elevated temperature properties. The appropriate specifications for each alloy are included. This international effort has provided a broad information base that has been compiled and reviewed by leading experts within the titanium industry, from several countries, encompassing numerous technology areas. Inputs have been obtained from the titanium industry, fabricators, users, government and academia. This up-to-date package covers information from almost the inception of the titanium industry, in the 1950s, to mid-1992. The information, organized by alloy, makes this exhaustive collection an easy-to-use data base at your fingertips, which generally includes all the product forms for each alloy. The 60-plus data sheets supply not only extensive graphical and tabular information on properties, but the datasheets also describe or illustrate important factors which would aid in the selection of the proper alloy or heat treatment. The datasheets are further supplemented with back-ground information on the metallurgy and fabrication characteristics of titanium alloys. An especially extensive coverage of properties, processing and metallurgy is provided in the datasheet for the workhorse of the titanium industry, Ti-6Al-4V. This compendium includes the newest alloys made public. even those still under development. In many cases, key references are included for further information on a given subject. Comprehensive datasheets provide extensive information on: Applications, Specifications, Corrosion, Mechanical Design Properties, Fatigue and Fracture
Download or read book Corrosion Behavior and Electrochemical Behavior of Titanium and Titanium Alloys in Alkaline Solutions of Hydrogen Peroxide written by T. Sigalovskaya and published by . This book was released on 1976 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Degradation of Implant Materials written by Noam Eliaz and published by Springer Science & Business Media. This book was released on 2012-08-21 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the current understanding of the mechanical, chemical and biological processes that are responsible for the degradation of a variety of implant materials. All 18 chapters will be written by internationally renowned experts to address both fundamental and practical aspects of research into the field. Different failure mechanisms such as corrosion, fatigue, and wear will be reviewed, together with experimental techniques for monitoring them, either in vitro or in vivo. Procedures for implant retrieval and analysis will be presented. A variety of biomaterials (stainless steels, titanium and its alloys, nitinol, magnesium alloys, polyethylene, biodegradable polymers, silicone gel, hydrogels, calcium phosphates) and medical devices (orthopedic and dental implants, stents, heart valves, breast implants) will be analyzed in detail. The book will serve as a broad reference source for graduate students and researchers studying biomedicine, corrosion, surface science, and electrochemistry.
