Download or read book The computational model of nanofluid considering heat transfer and entropy generation across a curved and flat surface written by Sayer Obaid Alharbi and published by Infinite Study. This book was released on 2023-01-01 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: The entropy generation analysis for the nanofluid flowing over a stretching/shrinking curved region is performed in the existence of the cross-diffusion effect. The surface is also subjected to second-order velocity slip under the effect of mixed convection. The Joule heating that contributes significantly to the heat transfer properties of nanofluid is incorporated along with the heat source/sink. Furthermore, the flow is assumed to be governed by an exterior magnetic field that aids in gaining control over the flow speed. With these frameworks, the mathematical model that describes the flow with such characteristics and assumptions is framed using partial differential equations (PDEs). The bvp4c solver is used to numerically solve the system of non-linear ordinary differential equations (ODEs) that are created from these equations. The solutions of obtained through this technique are verified with the available articles and the comparison is tabulated. Meanwhile, the interpretation of the results of this study is delivered through graphs. The findings showed that the Bejan number was decreased by increasing Brinkman number values whereas it enhanced the entropy generation. Also, as the curvature parameter goes higher, the speed of the nanofluid flow diminishes. Furthermore, the increase in the Soret and Dufour effects have enhanced the thermal conduction and the mass transfer of the nanofluid.

Download or read book Nanoparticle Heat Transfer and Fluid Flow written by W. J. Minkowycz and published by CRC Press. This book was released on 2016-04-19 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Featuring contributions by leading researchers in the field, Nanoparticle Heat Transfer and Fluid Flow explores heat transfer and fluid flow processes in nanomaterials and nanofluids, which are becoming increasingly important across the engineering disciplines. The book covers a wide range, from biomedical and energy conversion applications to mate

Download or read book Heat Transfer Enhancement with Nanofluids written by Vincenzo Bianco and published by CRC Press. This book was released on 2015-04-01 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofluids are gaining the attention of scientists and researchers around the world. This new category of heat transfer medium improves the thermal conductivity of fluid by suspending small solid particles within it and offers the possibility of increased heat transfer in a variety of applications. Bringing together expert contributions from

Download or read book Applications of Nanofluid for Heat Transfer Enhancement written by Mohsen Sheikholeslami and published by William Andrew. This book was released on 2017-02-26 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of Nanofluid for Heat Transfer Enhancement explores recent progress in computational fluid dynamic and nonlinear science and its applications to nanofluid flow and heat transfer. The opening chapters explain governing equations and then move on to discussions of free and forced convection heat transfers of nanofluids. Next, the effect of nanofluid in the presence of an electric field, magnetic field, and thermal radiation are investigated, with final sections devoted to nanofluid flow in porous media and application of nanofluid for solidification. The models discussed in the book have applications in various fields, including mathematics, physics, information science, biology, medicine, engineering, nanotechnology, and materials science. Presents the latest information on nanofluid free and force convection heat transfer, of nanofluid in the presence of thermal radiation, and nanofluid in the presence of an electric field Provides an understanding of the fundamentals in new numerical and analytical methods Includes codes for each modeling method discussed, along with advice on how to best apply them

Download or read book Nanofluid in Heat Exchangers for Mechanical Systems written by Zhixiong Li and published by Elsevier. This book was released on 2020-04-22 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofluid in Heat Exchanges for Mechanical Systems: Numerical Simulation shows how the finite volume method is used to simulate various applications of heat exchanges. Heat transfer enhancement methods are introduced in detail, along with a hydrothermal analysis and second law approaches for heat exchanges. The melting process in heat exchanges is also covered, as is the influence of variable magnetic fields on the performance of heat exchange. This is an important reference source for materials scientists and mechanical engineers who are looking to understand the main ways that nanofluid flow is simulated and applied in industry. Provides detailed coverage of major models used in nanofluid analysis, including the finite volume method, governing equations for turbulent flow, and equations of nanofluid in presence of variable magnetic field Offers detailed coverage of swirling flow devices and melting processes Assesses which models should be applied in which situations

Download or read book Nanoscale Flow written by Sarhan M. Musa and published by CRC Press. This book was released on 2018-09-03 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the physical properties and dynamical behavior of nanochannel flows has been of great interest in recent years and is important for the theoretical study of fluid dynamics and engineering applications in physics, chemistry, medicine, and electronics. The flows inside nanoscale pores are also important due to their highly beneficial drag and heat transfer properties. Nanoscale Flow: Advances, Modeling, and Applications presents the latest research in the multidisciplinary area of nanoscale flow. Featuring contributions from top inventors in industry, academia, and government, this comprehensive book: Highlights the current status of research on nucleate pool boiling heat transfer, flow boiling heat transfer, and critical heat flux (CHF) phenomena of nanofluids Describes two novel fractal models for pool boiling heat transfer of nanofluids, including subcooled pool boiling and nucleate pool boiling Explores thermal conductivity enhancement in nanofluids measured with a hot-wire calorimeter Discusses two-phase laminar mixed convection AL2O3–water nanofluid in an elliptic duct Explains the principles of molecular and omics imaging and spectroscopy techniques for cancer detection Analyzes fluid dynamics modeling of the tumor vasculature and drug transport Studies the properties of nanoscale particles and their impact on diagnosis, therapeutics, and theranostics Provides a brief background and review of medical nanoscale flow applications Contains useful appendices of physical constants, equations, common symbols, mathematical formulas, the periodic table, and more A valuable reference for engineers, scientists, and biologists, Nanoscale Flow: Advances, Modeling, and Applications is also designed for researchers, universities, industrial institutions, and government, giving it broad appeal.

Download or read book Computational and Experimental Evaluation of Nanofluids in Heating and Cooling Forced Convection Applications written by Roy T. Strandberg and published by . This book was released on 2021 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of the research was to examine the heat transfer and fluid dynamic performance of various nanofluids in heating and cooling applications using empirical and computational methods. Two experiments were performed to characterize and compare the performance of a Al2O3/60% ethylene glycol (60% EG) nanofluid to that of its base fluid. In the first experiment, the nanofluid was comprised of Al2O3 nanoparticles with 1% volumetric concentration in a 60% ethylene glycol/40% water (60% EG by mass) solution to that of 60%EG in a liquid to air heat exchanger. The test bed used in the experiment was built to simulate a small air handling system typical of that used in heating, ventilating and air conditioning (HVAC) applications. Previously established empirical correlations for thermophysical properties of fluids were used to determine the values of various parameters (e.g. Nusselt number, Reynolds number, and Prandtl number). The testing shows that the 1% Al2O3 nanofluid generates a marginally higher heat rate than the 60% EG under certain conditions. At Re=3,000, the nanofluid produced a heat rate that was 2% higher than that of the 60% EG. The empirically determined Nusselt number associated with the convection inside the coil tubing follows the behavior predicted by the Dittus-Boelter correlation quite well (R2=0.97), while the empirically determined Nusselt number for the 60% EG follows the Petukhov correlation similarly well (R2=0.97). Pressure loss and hydraulic power for the nanofluid were higher than for the base fluid over the range of conditions tested. The exergy destroyed in the heat exchange and fluid flow processes were between 8 and 13% higher for the nanofluid over the tested range of Reynolds numbers. The objective of the second study was to experimentally characterize and compare the performance of a nanofluid comprised of Al2O3 nanoparticles with 1, 2 and 3% volumetric concentrations in a 60% EG solution to that of 60% EG in a liquid to air heat exchanger. In this experiment, the heating system was operated in a higher temperature regime than in the first experiment. As in the first experiment, the test bed used in the experiment simulated a small air handling system typical of that used in HVAC applications. Entering conditions for the air and liquid were selected to emulate typical operating conditions of commercial air handling systems in sub arctic regions (such as Alaska). In the experiment the nanofluids generally did not perform as well as expected based on previous analytical work. The performance of the 1% nanofluid was generally equal to that of the base fluid considering identical entering conditions. However, the 2% and 3% nanofluids performance was considerably worse than that of the base fluid. The higher concentration nanofluids exhibited heat rates up to 14.6% lower than that of the 60%EG, and up to 44.3% lower heat transfer coefficient. The 1% Al2O3/60% EG exhibited 100% higher pressure drop across the coil than the base fluid considering equal heat output. In the computational portion of the research, the performance of a microchannel heat sink (MCHS), similar to those used to cool microprocessors filled with various nanofluids and the corresponding base fluid without nanoparticles are examined. The MCHS is modeled using a three- dimensional conjugate heat transfer and fluid dynamic finite-volume model over a range of conditions. The model incorporates a fixed heat flux of 1,000,000 W/m2 at the base of the solid domain. The thermophysical properties of the fluids are based on empirically obtained correlations, and vary with temperature. Nanofluids considered include 60% Ethylene Glycol/40% Water solutions with CuO, SiO2, and Al2O3 nanoparticles dispersed in volumetric concentrations ranging from 1 to 3%. The flow conditions analyzed are in the laminar range (50£Re£300), and consider multiple inlet temperatures. The analyses predict that when compared on an equal Reynolds number basis, the 60%EG/3% CuO nanofluid exhibits the highest heat transfer coefficient, and the largest reduction in average base temperature. At an inlet Reynolds number of 300, and an inlet temperature of 308K the nanofluid is predicted to have an average heat transfer coefficient that is 30% higher than that of the base fluid, while the average temperature on the base of the heat exchanger is 1K lower than that of the base fluid. In contrast, the inlet pressure required for these entering conditions is 192% higher than that for the base fluid, while the required hydraulic power to drive the flow is 366% higher than that of the base fluid. The enhanced heat transfer performance potential of nanofluids comes at the expense of generally higher pumping power consumption.

Download or read book Nanofluid Flow in Porous Media written by Mohsen Sheikholeslami Kandelousi and published by BoD – Books on Demand. This book was released on 2020-08-19 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies of fluid flow and heat transfer in a porous medium have been the subject of continuous interest for the past several decades because of the wide range of applications, such as geothermal systems, drying technologies, production of thermal isolators, control of pollutant spread in groundwater, insulation of buildings, solar power collectors, design of nuclear reactors, and compact heat exchangers, etc. There are several models for simulating porous media such as the Darcy model, Non-Darcy model, and non-equilibrium model. In porous media applications, such as the environmental impact of buried nuclear heat-generating waste, chemical reactors, thermal energy transport/storage systems, the cooling of electronic devices, etc., a temperature discrepancy between the solid matrix and the saturating fluid has been observed and recognized.

Download or read book Computational Fluid Flow and Heat Transfer written by Mukesh Kumar Awasthi and published by CRC Press. This book was released on 2024-04-25 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: The text provides insight into the different mathematical tools and techniques that can be applied to the analysis and numerical computations of flow models. It further discusses important topics such as the heat transfer effect on boundary layer flow, modeling of flows through porous media, anisotropic polytrophic gas model, and thermal instability in viscoelastic fluids. This book: Discusses modeling of Rayleigh-Taylor instability in nanofluid layer and thermal instability in viscoelastic fluids Covers open FOAM simulation of free surface problems, and anisotropic polytrophic gas model Highlights the Sensitivity Analysis in Aerospace Engineering, MHD Flow of a Micropolar Hybrid Nanofluid, and IoT-Enabled Monitoring for Natural Convection Presents thermal behavior of nanofluid in complex geometries and heat transfer effect on Boundary layer flow Explains natural convection heat transfer in non-Newtonian fluids and homotropy series solution of the boundary layer flow Illustrates modeling of flows through porous media and investigates Shock-driven Richtmyer-Meshkov instability It is primarily written for senior undergraduate, graduate students, and academic researchers in the fields of Applied Sciences, Mechanical Engineering, Manufacturing Engineering, Production Engineering, Industrial engineering, Automotive engineering, and Aerospace engineering.

Download or read book Nanofluid Applications for Advanced Thermal Solutions written by Shriram S. Sonawane and published by Elsevier. This book was released on 2023-06-28 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofluid Applications for Advanced Thermal Solutions covers heat transfer applications of nanofluids in a variety of fields and the main techniques used in nanofluid flow and heat transfer analysis. The book features an introduction to heat transfer, nanofluid conduction, convection and nanofluid boiling and provides a thorough understanding of a variety of applications, including the energy storage component of solar PVT systems. It covers fundamental topics such as the analysis and measurement of thermophysical properties, convection, and heat transfer equipment performance, and provides a rigorous framework to assist readers in developing new nanofluid-based devices. Finally, the book explores convective instabilities, nanofluids in porous media, and entropy generation in nanofluids. This will be a valuable resource for upper undergraduate, postgraduate, and doctoral students and researchers in the fields of nanotechnology and nanofluids looking at heat transfer processes in chemical engineering and the petroleum industry. Provides a comprehensive overview of the heat transfer application of nanofluids in a variety of fields Features numerical and experimental investigations of hybrid and mono nanoparticles based nanofluids Explores comparative performance investigations of various nanofluids for absorption/regeneration and metal extraction/stripping operations Provides case examples of operation and scale-up challenges for nanofluid applications in the industrial process

Download or read book Convective Flow and Heat Transfer from Wavy Surfaces written by Aroon Shenoy and published by CRC Press. This book was released on 2016-10-14 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Convective Flow and Heat Transfer from Wavy Surfaces: Viscous Fluids, Porous Media, and Nanofluids addresses the wavy irregular surfaces in heat transfer devices. Fluid flow and heat transfer studies from wavy surfaces have received attention, since they add complexity and require special mathematical techniques. This book considers the flow and heat transfer characteristics from wavy surfaces, providing an understanding of convective behavioral changes.

Download or read book Heat Transfer Due to Laminar Natural Convection of Nanofluids written by De-Yi Shang and published by Springer. This book was released on 2018-07-30 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a theoretical study of heat transfer due to laminar natural convection of nanofluids, using Al2O3-water nanofluid as an example. An innovative method of similarity transformation of velocity fields on laminar boundary layers is applied for the development of a mathematical governing model of natural convection with actual nanofluids, and a novel model of the nanofluid's variable thermophysical properties is derived by a mathematical analysis based on the developed model of variable physical properties of fluids combined with the model of the nanofluid's thermal conductivity and viscosity. Based on these, the physical property factors of nanofluids are produced, which leads to a simultaneous solution for deep investigations of hydrodynamics and heat transfer of nanofluid's natural convection. The book also proposes novel predictive formulae for the evaluation of heat transfer of Al2O3-water nanofluid’s natural convection. The formulae have reliable theoretical and practical value because they are developed by rigorous theoretical analysis of heat transfer combined with full consideration of the effects of the temperature-dependent physical properties of nanofluids and the nanoparticle shape factor and concentration, as well as variations of fluid boundary temperatures. The conversion factors proposed help to turn the heat transfer coefficient and rate of fluid natural convection into those of nanofluid natural convection. Furthermore, several calculation examples are provided to demonstrate the heat transfer application of the proposed predictive formulae.

Download or read book Heat Transfer Enhancement Using Nanofluid Flow in Microchannels written by Davood Domairry Ganji and published by William Andrew. This book was released on 2016-06-11 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Transfer Enhancement Using Nanofluid Flow in Microchannels: Simulation of Heat and Mass Transfer focuses on the numerical simulation of passive techniques, and also covers the applications of external forces on heat transfer enhancement of nanofluids in microchannels. Economic and environmental incentives have increased efforts to reduce energy consumption. Heat transfer enhancement, augmentation, or intensification are the terms that many scientists employ in their efforts in energy consumption reduction. These can be divided into (a) active techniques which require external forces such as magnetic force, and (b) passive techniques which do not require external forces, including geometry refinement and fluid additives. Gives readers the knowledge they need to be able to simulate nanofluids in a wide range of microchannels and optimise their heat transfer characteristics Contains real-life examples, mathematical procedures, numerical algorithms, and codes to allow readers to easily reproduce the methodologies covered, and to understand how they can be applied in practice Presents novel applications for heat exchange systems, such as entropy generation minimization and figures of merit, allowing readers to optimize the techniques they use Focuses on the numerical simulation of passive techniques, and also covers the applications of external forces on heat transfer enhancement of nanofluids in microchannels

Download or read book Nanofluids for Heat and Mass Transfer written by Bharat Bhanvase and published by Academic Press. This book was released on 2021-04-29 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofluids for Heat and Mass Transfer: Fundamentals, Sustainable Manufacturing and Applications presents the latest on the performance of nanofluids in heat transfer systems. Dr. Bharat Bhanvase investigates characterization techniques and the various properties of nanofluids to analyze their efficiency and abilities in a variety of settings. The book moves through a presentation of the fundamentals of synthesis and nanofluid characterization to various properties and applications. Aimed at academics and researchers focused on heat transfer in energy and engineering disciplines, this book considers sustainable manufacturing processes within newer energy harvesting technologies to serve as an authoritative and well-rounded reference. Highlights the major elements of nanofluids as an energy harvesting fluid, including their preparation methods, characterization techniques, properties and applications Includes valuable findings and insights from numerical and computational studies Provides nanofluid researchers with research inspiration to discover new applications and further develop technologies

Download or read book Nanofluid Heat and Mass Transfer in Engineering Problems written by Mohsen Sheikholeslami Kandelousi and published by BoD – Books on Demand. This book was released on 2017-03-15 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the present book, nanofluid heat and mass transfer in engineering problems are investigated. The use of additives in the base fluid like water or ethylene glycol is one of the techniques applied to augment heat transfer. Newly, innovative nanometer-sized particles have been dispersed in the base fluid in heat transfer fluids. The fluids containing the solid nanometer-sized particle dispersion are called "nanofluids." At first, nanofluid heat and mass transfer over a stretching sheet are provided with various boundary conditions. Problems faced for simulating nanofluids are reported. Also, thermophysical properties of various nanofluids are presented. Nanofluid flow and heat transfer in the presence of magnetic field are investigated. Furthermore, applications for electrical and biomedical engineering are provided. Besides, applications of nanofluid in internal combustion engine are provided.

Download or read book Thermal Characteristics and Convection in Nanofluids written by Aditya Kumar and published by Springer Nature. This book was released on 2021-01-04 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers synthesis, characterization, stability, heat transfer and applications of nanofluids. It includes different types of nanofluids, their preparation methods as well as its effects on the stability and thermophysical properties of nanofluids. It provides a discussion on the mechanism behind the change in the thermal properties of nanofluids and heat transfer behaviour. It presents the latest information and discussion on the preparation and advanced characterization of nanofluids. It also consists of stability analysis of nanofluids and discussion on why it is essential for the industrial application. The book provides a discussion on thermal boundary layer properties in convection. Future directions for heat transfer applications to make the production and application of nanofluids at industrial level are also discussed.

Download or read book Advances in Nanofluid Heat Transfer written by Hafiz Muhammad Ali and published by Elsevier. This book was released on 2022-05-28 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Nanofluid Heat Transfer covers the broad definitions, brief history, preparation techniques, thermophysical properties, heat transfer characteristics, and emerging applications of hybrid nanofluids. Starting with the basics, this book advances step-by-step toward advanced topics, with mathematical models, schematic diagrams and discussions of the experimental work of leading researchers. By introducing readers to new techniques, this book helps readers resolve existing problems and implement nanofluids in innovative new applications. This book provides detailed coverage of stability and reliable measurement techniques for nanofluid properties, as well as different kinds of base fluids. Providing a clear understanding of what happens at the nanoscale, the book is written to be used by engineers in industry as well as researchers and graduate students. Covers new applications of nanofluids, along with key challenges encountered in the commercialization of this technology Highlights new nanofluid properties and associated numerical modeling methods Addresses the very latest topics in nanofluids sciences, such as ionic nanofluids