Download or read book The Chemical and Physical Mechanisms Determining the Morphology of Wet chemically Etched Si 100 written by Brandon Scott Aldinger and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because harsh cleaning processes roughen silicon wafers, etchants that can produce smooth Si(100) surfaces have been a long-standing goal of the microelectronics industry. In this work, scanning tunneling microscopy was used to investigate the morphologies of wet-chemically-etched Si(100) surfaces, whereas the chemical composition was studied using infrared absorption spectroscopy coupled with a polarization deconvolution technique. Using this combined approach, aqueous ammonium fluoride etching of Si(100) is shown to produce near-atomically flat surfaces consisting of alternating rows of silicon dihydrides. A new assignment of the vibrational modes accounts for the presence of both strained and unstrained adsorbates on the etched surface. This smooth morphology was easily disrupted by the accumulation of hydrogen bubbles on the surface during etching. Roughening mechanisms created raised circular pillars and microfaceted etch pits if bubbles were not removed via one of several bubble-reduction techniques. In addition, density functional theory was used to predict the vibrational modes for a variety of hydrogen-terminated silicon surfaces. The calculated mode energies highlight the sensitivity of vibrational frequencies to interadsorbate strain, though in general, the calculated frequencies were not accurate enough to predict vibrational frequencies without substantial experimental confirmation. Lastly, the pH-dependence of buffered hydrofluoric acid (BHF) etching of Si(100) was examined. Below the critical pH of 7.8, etched surfaces became progressively rougher and covered with hillocks, whereas surfaces etched in solutions above this pH exhibit no change from the flat missing-row structure. Prominent stretching modes for the BHFetched H/Si(100) surfaces were also assigned based on trends observed in the pHmodified Si(100) spectra and previously well-characterized morphologies.
Download or read book Physics Briefs written by and published by . This book was released on 1994 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Wet Bulk Micromachining for MEMS written by Prem Pal and published by CRC Press. This book was released on 2017-04-07 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectromechanical systems (MEMS)-based sensors and actuators have become remarkably popular in the past few decades. Rapid advances have taken place in terms of both technologies and techniques of fabrication of MEMS structures. Wet chemical–based silicon bulk micromachining continues to be a widely used technique for the fabrication of microstructures used in MEMS devices. Researchers all over the world have contributed significantly to the advancement of wet chemical–based micromachining, from understanding the etching mechanism to exploring its application to the fabrication of simple to complex MEMS structures. In addition to its various benefits, one of the unique features of wet chemical–based bulk micromachining is the ability to fabricate slanted sidewalls, such as 45° walls as micromirrors, as well as freestanding structures, such as cantilevers and diaphragms. This makes wet bulk micromachining necessary for the fabrication of structures for myriad applications. This book provides a comprehensive understating of wet bulk micromachining for the fabrication of simple to advanced microstructures for various applications in MEMS. It includes introductory to advanced concepts and covers research on basic and advanced topics on wet chemical–based silicon bulk micromachining. The book thus serves as an introductory textbook for undergraduate- and graduate-level students of physics, chemistry, electrical and electronic engineering, materials science, and engineering, as well as a comprehensive reference for researchers working or aspiring to work in the area of MEMS and for engineers working in microfabrication technology.
Download or read book Handbook of Porous Silicon written by Leigh Canham and published by Springer. This book was released on 2021-01-14 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Porous Silicon brings together the expertise of a large, international team of almost 100 academic researchers, engineers, and product developers from industry across electronics, medicine, nutrition and consumer care to summarize the field in its entirity with 150 chapters and 5000 references. The volume presents 5 parts which cover fabrication techniques, material properties, characterization techniques, processing and applications. Much attention was given in the the past to its luminescent properties, but increasingly it is the biodegradability, mechanical, thermal and sensing capabilities that are attracting attention. The volume is divided into focussed data reviews with, wherever possible, quantitative rather than qualitative descriptions of both properties and performance. The book is targeted at undergraduates, postgraduates, and experienced researchers.
Download or read book Encyclopedia of Microfluidics and Nanofluidics written by Dongqing Li and published by Springer Science & Business Media. This book was released on 2008-08-06 with total page 2242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering all aspects of transport phenomena on the nano- and micro-scale, this encyclopedia features over 750 entries in three alphabetically-arranged volumes including the most up-to-date research, insights, and applied techniques across all areas. Coverage includes electrical double-layers, optofluidics, DNC lab-on-a-chip, nanosensors, and more.
Download or read book CRC Handbook of Metal Etchants written by Perrin Walker and published by CRC Press. This book was released on 1990-12-11 with total page 1434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents cleaning and etching solutions, their applications, and results on inorganic materials. It is a comprehensive collection of etching and cleaning solutions in a single source. Chemical formulas are presented in one of three standard formats - general, electrolytic or ionized gas formats - to insure inclusion of all necessary operational data as shown in references that accompany each numbered formula. The book describes other applications of specific solutions, including their use on other metals or metallic compounds. Physical properties, association of natural and man-made minerals, and materials are shown in relationship to crystal structure, special processing techniques and solid state devices and assemblies fabricated. This publication also presents a number of organic materials which are widely used in handling and general processing...waxes, plastics, and lacquers for example. It is useful to individuals involved in study, development, and processing of metals and metallic compounds. It is invaluable for readers from the college level to industrial R & D and full-scale device fabrication, testing and sales. Scientific disciplines, work areas and individuals with great interest include: chemistry, physics, metallurgy, geology, solid state, ceramic and glass, research libraries, individuals dealing with chemical processing of inorganic materials, societies and schools.
Download or read book GaN and Related Materials written by Stephen J. Pearton and published by CRC Press. This book was released on 2021-10-08 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents views on current developments in heat and mass transfer research related to the modern development of heat exchangers. Devotes special attention to the different modes of heat and mass transfer mechanisms in relation to the new development of heat exchangers design. Dedicates particular attention to the future needs and demands for further development in heat and mass transfer. GaN and related materials are attracting tremendous interest for their applications to high-density optical data storage, blue/green diode lasers and LEDs, high-temperature electronics for high-power microwave applications, electronics for aerospace and automobiles, and stable passivation films for semiconductors. In addition, there is great scientific interest in the nitrides, because they appear to form the first semiconductor system in which extended defects do not severely affect the optical properties of devices. This series provides a forum for the latest research in this rapidly-changing field, offering readers a basic understanding of new developments in recent research. Series volumes feature a balance between original theoretical and experimental research in basic physics, device physics, novel materials and quantum structures, processing, and systems.
Download or read book The MEMS Handbook written by Mohamed Gad-el-Hak and published by CRC Press. This book was released on 2001-09-27 with total page 1386 pages. Available in PDF, EPUB and Kindle. Book excerpt: The revolution is well underway. Our understanding and utilization of microelectromechanical systems (MEMS) are growing at an explosive rate with a worldwide market approaching billions of dollars. In time, microdevices will fill the niches of our lives as pervasively as electronics do right now. But if these miniature devices are to fulfill their mammoth potential, today's engineers need a thorough grounding in the underlying physics, modeling techniques, fabrication methods, and materials of MEMS. The MEMS Handbook delivers all of this and more. Its team of authors-unsurpassed in their experience and standing in the scientific community- explore various aspects of MEMS: their design, fabrication, and applications as well as the physical modeling of their operations. Designed for maximum readability without compromising rigor, it provides a current and essential overview of this fledgling discipline.
Download or read book Silicon Micromachining written by Miko Elwenspoek and published by Cambridge University Press. This book was released on 2004-08-19 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the key techniques used in the fabrication of micron-scale structures in silicon; for graduate students and researchers.
Download or read book C H N and O in Si and Characterization and Simulation of Materials and Processes written by A. Borghesi and published by Newnes. This book was released on 2012-12-02 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Containing over 200 papers, this volume contains the proceedings of two symposia in the E-MRS series. Part I presents a state of the art review of the topic - Carbon, Hydrogen, Nitrogen and Oxygen in Silicon and in Other Elemental Semiconductors. There was strong representation from the industrial laboratories, illustrating that the topic is highly relevant for the semiconductor industry. The second part of the volume deals with a topic which is undergoing a process of convergence with two concerns that are more particularly application oriented. Firstly, the advanced instrumentation which, through the use of atomic force and tunnel microscopies, high resolution electron microscopy and other high precision analysis instruments, now allows for direct access to atomic mechanisms. Secondly, the technological development which in all areas of applications, particularly in the field of microelectronics and microsystems, requires as a result of the miniaturisation race, a precise mastery of the microscopic mechanisms.
Download or read book Electrical Electronics Abstracts written by and published by . This book was released on 1997 with total page 2304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Glass Science and Technology written by James E Shelby and published by Royal Society of Chemistry. This book was released on 2015-11-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a concise and inexpensive introduction for an undergraduate course in glass science and technology. The level of the book has deliberately been maintained at the introductory level to avoid confusion of the student by inclusion of more advanced material, and is unique in that its text is limited to the amount suitable for a one term course for students in materials science, ceramics or inorganic chemistry. The contents cover the fundamental topics of importance in glass science and technology, including glass formation, crystallization, phase separation and structure of glasses. Additional chapters discuss the most important properties of glasses, including discussion of physical, optical, electrical, chemical and mechanical properties. A final chapter provides an introduction to a number of methods used to form technical glasses, including glass sheet, bottles, insulation fibre, optical fibres and other common commercial products. In addition, the book contains discussion of the effects of phase separation and crystallization on the properties of glasses, which is neglected in other texts. Although intended primarily as a textbook, Introduction to Glass Science and Technology will also be invaluable to the engineer or scientist who desires more knowledge regarding the formation, properties and production of glass.
Download or read book Extended Abstracts written by Electrochemical Society and published by . This book was released on 1988 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Silicon Based MEMS Materials and Technologies written by Markku Tilli and published by Elsevier. This book was released on 2009-12-08 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to MEMS materials, technologies and manufacturing, examining the state of the art with a particular emphasis on current and future applications. Key topics covered include: - Silicon as MEMS material - Material properties and measurement techniques - Analytical methods used in materials characterization - Modeling in MEMS - Measuring MEMS - Micromachining technologies in MEMS - Encapsulation of MEMS components - Emerging process technologies, including ALD and porous silicon Written by 73 world class MEMS contributors from around the globe, this volume covers materials selection as well as the most important process steps in bulk micromachining, fulfilling the needs of device design engineers and process or development engineers working in manufacturing processes. It also provides a comprehensive reference for the industrial R&D and academic communities. - Veikko Lindroos is Professor of Physical Metallurgy and Materials Science at Helsinki University of Technology, Finland. - Markku Tilli is Senior Vice President of Research at Okmetic, Vantaa, Finland. - Ari Lehto is Professor of Silicon Technology at Helsinki University of Technology, Finland. - Teruaki Motooka is Professor at the Department of Materials Science and Engineering, Kyushu University, Japan. - Provides vital packaging technologies and process knowledge for silicon direct bonding, anodic bonding, glass frit bonding, and related techniques - Shows how to protect devices from the environment and decrease package size for dramatic reduction of packaging costs - Discusses properties, preparation, and growth of silicon crystals and wafers - Explains the many properties (mechanical, electrostatic, optical, etc), manufacturing, processing, measuring (incl. focused beam techniques), and multiscale modeling methods of MEMS structures
Download or read book Handbook of Photovoltaic Silicon written by Deren Yang and published by Springer. This book was released on 2019-11-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilization of sun light is one of the hottest topics in sustainable energy research. To efficiently convert sun power into a reliable energy – electricity – for consumption and storage, silicon and its derivatives have been widely studied and applied in solar cell systems. This handbook covers the photovoltaics of silicon materials and devices, providing a comprehensive summary of the state of the art of photovoltaic silicon sciences and technologies. This work is divided into various areas including but not limited to fundamental principles, design methodologies, wafering techniques/fabrications, characterizations, applications, current research trends and challenges. It offers the most updated and self-explanatory reference to all levels of students and acts as a quick reference to the experts from the fields of chemistry, material science, physics, chemical engineering, electrical engineering, solar energy, etc..
Download or read book Molecular Sensors and Nanodevices written by John X. J. Zhang and published by Academic Press. This book was released on 2018-11-19 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular Sensors and Nanodevices: Principles, Designs and Applications in Biomedical Engineering, Second Edition is designed to be used as a foundational text, aimed at graduates, advanced undergraduates, early-career engineers and clinicians. The book presents the essential principles of molecular sensors, including theories, fabrication techniques and reviews. In addition, important devices and recently, highly-cited research outcomes are also cited. This differentiates the book from other titles on the market whose primary focus is more research-oriented and aimed at more of a niche market. - Covers the fundamental principles of device engineering and molecular sensing, sensor theories and applications in biomedical science and engineering - Introduces nano/micro fabrication techniques, including MEMS, bioMEMS, microTAS and nanomaterials science that are essential in the miniaturization of versatile molecular sensors - Explores applications of nanomaterials and biomaterials, including proteins, DNAs, nanoparticles, quantum dots, nanotubes/wires and graphene in biomedicine
Download or read book Ceramic Abstracts written by and published by . This book was released on 1999 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt:
