Download or read book The Catalytic Combustion of Methane Over Supported Noble Metal Catalysts written by Michael Gerard McGrath and published by . This book was released on 1995 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Methane Combustion over Lanthanum based Perovskite Mixed Oxides written by Hamidreza Arandiyan and published by Springer. This book was released on 2015-04-30 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents current research into the catalytic combustion of methane using perovskite-type oxides (ABO3). Catalytic combustion has been developed as a method of promoting efficient combustion with minimum pollutant formation as compared to conventional catalytic combustion. Recent theoretical and experimental studies have recommended that noble metals supported on (ABO3) with well-ordered porous networks show promising redox properties. Three-dimensionally ordered macroporous (3DOM) materials with interpenetrated and regular mesoporous systems have recently triggered enormous research activity due to their high surface areas, large pore volumes, uniform pore sizes, low cost, environmental benignity, and good chemical stability. These are all highly relevant in terms of the utilization of natural gas in light of recent catalytic innovations and technological advances. The book is of interest to all researchers active in utilization of natural gas with novel catalysts. The research covered comes from the most important industries and research centers in the field. The book serves not only as a text for researcher into catalytic combustion of methane, 3DOM perovskite mixed oxide, but also explores the field of green technologies by experts in academia and industry. This book will appeal to those interested in research on the environmental impact of combustion, materials and catalysis.
Download or read book The Performance of Supported Noble Metal Catalysts in Conditions of Catalytic Combustion written by Gavin Leon Rickett and published by . This book was released on 2007 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deactivation Studies of Noble Metal Catalysts for Lean Methane Combustion written by Georgeta M. Istratescu and published by . This book was released on 2014 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green House Gases (GHG) contribution to global warming has led to extensive research into reduction of emission of the GHG. Transportation, as a main contributor to GHG, faces a major challenge in researching and developing of new technologies with the aim of reducing the carbon foot print. The use of alternative fuels with lower harmful emissions became obvious as a result of emission control regulations and climate change. Natural gas engines gained popularity due to their ability to burn the fuel almost completely, which recommends them as an environmentally friendly alternative to fossil fuels engines. However, the incomplete combustion of methane in natural gas engines will release methane and carbon monoxide into the atmosphere. The fugitive methane emission problem can be tackled by the development of performant catalytic converters. This project reports on catalytic activity and stability of three sets of catalyst. The first set, palladium only catalysts provided by 15, 80 and 150 g/ft3 loading, were designed for methane combustion but not necessarily for lean burn engines. The second set studied were 2 catalysts: Pt and Pt-Pd (4:1) catalyst, with a loading of 95 g/ft3. Their mainly intend was the use as diesel oxidation catalysts. The third set of catalytic converters was designed for use for lean burn gas engines. The catalysts studied were Pt-Pd (1:5) with a loading of 150 g/ft3, Pd 122 (122 g/ft3), Pd Rh (117.15:2.85) (loading 120 g/ft3) and PtPdRh (19:73:2.85) with a loading of 94.85 g/ft3. The influence of different pretreatments on the catalyst activity (i.e. de-greening temperature, reduction process) were studied through ignition-extinction experiments. The stability of the catalyst was investigated through thermal ageing experiments. The effect of water on the catalytic activity was investigated through hydro-thermal ageing experiments.
Download or read book Methane Conversion written by D.M. Bibby and published by Elsevier. This book was released on 1988-03-01 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume comprises the invited plenary lectures, contributed and poster papers presented at a symposium organised to mark the successful inauguration of the world's first commercial plant for production of gasoline from natural gas, based on the Mobil methanol-to-gasoline process. The objectives of the Symposium were to present both fundamental research and engineering aspects of the development and commercialization of gas-to-gasoline processes. These include steam reforming, methanol synthesis and methanol-to-gasoline. Possible alternative processes e.g. MOGD, Fischer-Tropsch synthesis of hydrocarbons, and the direct conversion of methane to higher hydrocarbons were also considered.The papers in this volume provide a valuable and extremely wide-ranging overview of current research into the various options for natural gas conversion, giving a detailed description of the gas-to-gasoline process and plant. Together, they represent a unique combination of fundamental surface chemistry catalyst characterization, reaction chemistry and engineering scale-up and commercialization.
Download or read book Non steady Behaviour in the Oxidation of Methane Over Supported Noble metal Catalysts written by You Quan Deng and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalytic Ignition of Hydrogen and Hydrogen Hydrocarbon Blends Over Noble Metals written by Nickolai M. Rubtsov and published by Springer Nature. This book was released on 2023-06-01 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book examines the issues on noble metal influence on gaseous combustion. The book focuses on the new data on combustion processes having practical applications and includes fire safety issues in the use of noble metals in hydrogen recombiners for NPP, as well as in catalytically stabilized (CS) combustion technology including stimulation of combustion of hydrogen-blended hydrocarbons, synthesis of carbon nanotubes, and determination of catalytic ignition limits in noble metal-hydrogen-hydrocarbon systems to meet the challenges of explosion safety.
Download or read book Catalytic Combustion of Methane with Nanostructured Barium Hexaaluminate based Materials written by Juan Andrey Zarur Jury and published by . This book was released on 1999 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalysis written by James J Spivey and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is an increasing challenge for chemical industry and research institutions to find cost-efficient and environmentally sound methods of converting natural resources into fuels chemicals and energy. Catalysts are essential to these processes and the Catalysis Specialist Periodical Report series serves to highlight major developments in this area. This series provides systematic and detailed reviews of topics of interest to scientists and engineers in the catalysis field. The coverage includes all major areas of heterogeneous and homogeneous catalysis and also specific applications of catalysis such as NOx control kinetics and experimental techniques such as microcalorimetry. Each chapter is compiled by recognised experts within their specialist fields and provides a summary of the current literature. This series will be of interest to all those in academia and industry who need an up-to-date critical analysis and summary of catalysis research and applications. Catalysis will be of interest to anyone working in academia and industry that needs an up-to-date critical analysis and summary of catalysis research and applications. Specialist Periodical Reports provide systematic and detailed review coverage in major areas of chemical research. Compiled by teams of leading experts in their specialist fields, this series is designed to help the chemistry community keep current with the latest developments in their field. Each volume in the series is published either annually or biennially and is a superb reference point for researchers. www.rsc.org/spr
Download or read book The Partial Oxidation of Light Hydrocarbons Over Noble Metal Catalysts at Less Than Millisecond Contact Times written by Paul Matthew Witt and published by . This book was released on 1997 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Low Temperature Methane Steam Reforming Over Supported Noble Metal Catalysts written by Robert Hugo Fitzburgh and published by . This book was released on 1987 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Preparation of Catalysts VII written by R. Maggi and published by Elsevier. This book was released on 1998-08-17 with total page 1007 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the VIIth International Symposium on the Scientific Bases for the Preparation of Heterogeneous Catalysts, are in line with the general scope of this series of events. Emphasis in all Symposia has been on the scientific aspects of the preparation of new and industrial catalysts, or on new methods of preparation, rather than on the catalytic reactions in which such solids are ultimately used. In the present context, the catalytic event itself has only been considered as another, though often decisive, method of catalyst characterization.
Download or read book Partial Oxidation of Methane Over Noble Metal Catalysts written by Paul Mikael Torniainen and published by . This book was released on 1994 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Catalytic Conversion of Carbon Monoxide and Methane Over Metal and Metal Oxide Catalysts written by Wenchi Liu and published by . This book was released on 2018 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalysis is of vital importance in a wide range of areas including energy processing and chemical production. Catalytic conversion of C1 sources such as carbon monoxide and methane to make hydrocarbon fuels and oxygenated products has far reaching implications especially in the context of the gradual depletion of crude oil resource and the potential surge in the natural gas production in the coming decades. The control over reaction activity and selectivity for the conversion CO and CH4 in the Fischer–Tropsch synthesis and oxidative coupling of methane (OCM) have received tremendous attention and have been proved challenging. This dissertation focuses on the catalytic conversion of CO (Fischer–Tropsch synthesis) using supported cobalt based bimetallic nanoparticle model catalysts and the oxidative coupling of methane with noble metal promoted metal oxide catalysts. Using colloidal synthesis, a series of cobalt based bimetallic nanoparticles Co–M (M = Mn, Ru, Rh, and Re) with well-defined sizes, shapes, and compositions were obtained. Detailed synthesis procedures were presented and key synthetic parameters were discussed. The as-synthesized nanoparticles were subjected to extensive in-situ X-ray spectroscopy studies using ambient pressure X-ray photoelectron spectroscopy (AP-XPS) and X-ray absorption spectroscopy (XAS) under catalytic relevant conditions. Composition wise, the results indicate the surface concentration of Co on the as-synthesized Co–M bimetallic particles is slightly less than the bulk atomic Co %. While oxidation treatment led to a slight increase of the surface Co, major effect was seen after the reduction treatment where surface segregation of the second metal resulted in a drastic decrease of the surface Co content. The effect is more pronounced at elevated reduction temperatures. Under reaction conditions, the surface compositions remained similar to those after the reduction treatment at high temperatures. Among the bimetallics tested, the Co–Mn system is relatively less susceptible to surface reconstructions induced by oxidation and reduction treatments. In addition, the reducibility of Co was also shown to be modified depending on the second metal present and Re was proved to be most efficient in leading to a facile reduction of Co. Catalytic performance of the bimetallic catalysts supported on mesoporous silica MCF–17 indicates a positive effect in the catalytic activity for Co–Rh and Co–Mn systems, while Co–Re and Co–Cu showed decreased activity. Less pronounced promotion effect of the second metal on the product distribution was observed with only a slight increase in the selectivity towards C5+ products. The selectivities for CH4 and C5+ of the various Co–M bimetallic catalysts generally resemble those of pure Co catalysts. Although in extremely low selectivity, alcohols were also formed with Co–Rh and Co–Cu bimetallic catalysts. The appearance of longer chain alcohol such as propanol, which was not present for pure Co catalysts, is an evidence for potential synergistic promotion. For oxidative coupling of methane (OCM), the promotion effect of noble metals (Pt, Ir, and Rh) on the performance of MnxOy-Na2WO4/MCF–17 catalysts was investigated. The introduction of noble metals had little effect on the surface area and phase composition of the original catalyst but led to a more reduced nature of the surface oxide species. Catalytic study revealed an enhanced selectivity towards both C2 and C3 hydrocarbons as compared to the undoped MnxOy-Na2WO4/MCF–17 catalyst in the order of Rh-doped > Ir-doped > Pt-doped samples together with a lower olefin to paraffin ratio. A more optimized strength of interaction between the carbon intermediates and the catalyst surface was suggested, which in combination with the improved reducibility of Mn and W species are believed to be responsible for the improved performance. In addition, monodispersed leaf-like manganese–tungsten–oxide (Mn–W–Ox) nanoparticles and hydroxylated hexagonal boron nitride (h-BN) were synthesized and used as novel catalysts in OCM reaction. Preliminary results indicate that the MCF–17 supported Mn–W–Ox nanoparticle catalyst showed a CH4 conversion of 5.4% and C2 selectivity of 42% with good stability over time. On the other hand, hydroxylated h-BN exhibited good activity (~20% CH4 conversion) with moderate selectivity towards C2 hydrocarbons (20%–30%). However, the hydroxylated h-BN catalysts faced serious deactivation, which was not eliminated by lowering the reaction temperature or the oxygen concentration in the reaction gas feed.
Download or read book Catalytic Combustion at Millisecond Contact Times written by Christian Thomas Goralski and published by . This book was released on 1998 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Supported Metals in Catalysis written by James Arthur Anderson and published by World Scientific. This book was released on 2012 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from experts in supported metal catalysis, from both the industry and academia, this book presents the latest developments in characterization and application of supported metals in heterogeneous catalysis. In addition to a thorough and updated coverage of the traditional aspects of heterogeneous catalysis such as preparation, characterization and use in well-established technologies such as Naphtha reforming, the book also includes emerging areas where supported metal catalysis will make significant contributions in future developments, such as fuel cells and fine chemicals synthesis. The second edition of Supported Metals in Catalysis comes complete with new and updated chapters containing important summaries of research in a rapidly evolving field. Very few other books deal with this highly pertinent subject matter, and as such, it is a must-have for anyone working in the field of heterogeneous catalysis.
Download or read book Environmental Catalysis written by F J J G Janssen and published by World Scientific. This book was released on 1999-04-14 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together highlights of a theme which is growing in interest: the creation of a sustainable society using catalysis as the main tool. Catalysts play key roles in the production of clean fuels, the conversion of waste and green raw materials into energy, clean combustion engines including control of NOx and soot production and reduction of greenhouse gases, production of clean water and of polymers, as well as reduction from polymers to monomers. Catalysts are also of prime importance in the developing H2 and syngas production technology, aimed at producing clean fuels for the coming decades. And catalysts can be recycled.
