Download or read book The Boundary Integral Equatio Method in Axisymmetric Stress Analysis Problems written by Adib A. Bakr and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Boundary Integral Equation (BIE) or the Boundary Element Method is now well established as an efficient and accurate numerical technique for engineering problems. This book presents the application of this technique to axisymmetric engineering problems, where the geometry and applied loads are symmetrical about an axis of rotation. Emphasis is placed on using isoparametric quadratic elements which exhibit excellent modelling capabilities. Efficient numerical integration schemes are also presented in detail. Unlike the Finite Element Method (FEM), the BIE adaptation to axisymmetric problems is not a straightforward modification of the two or three-dimensional formulations. Two approaches can be used; either a purely axisymmetric approach based on assuming a ring of load, or, alternatively, integrating the three-dimensional fundamental solution of a point load around the axis of rotational symmetry. Throughout this ~ook, both approaches are used and are shown to arrive at identi cal solutions. The book starts with axisymmetric potential problems and extends the formulation to elasticity, thermoelasticity, centrifugal and fracture mechanics problems. The accuracy of the formulation is demonstrated by solving several practical engineering problems and comparing the BIE solution to analytical or other numerical methods such as the FEM. This book provides a foundation for further research into axisymmetric prob lems, such as elastoplasticity, contact, time-dependent and creep prob lems.

Download or read book The Boundary Integral Equation Method in Axisymmetric Stress Analysis Problems written by A. A. Bakr and published by Springer Verlag. This book was released on 1986 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Boundary Integral and Singularity Methods for Linearized Viscous Flow written by C. Pozrikidis and published by Cambridge University Press. This book was released on 1992-02-28 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: In addition to theory, this study focuses on practical application and computer implementation in a coherent introduction to boundary integrals, boundary element and singularity methods for steady and unsteady flow at zero Reynolds numbers.

Download or read book Introduction to Boundary Elements written by Friedel Hartmann and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt: to Boundary Elements Theory and Applications With 194 Figures Springer-Verlag Berlin Heidelberg New York London Paris Tokyo Hong Kong Dr.-Ing. Friedel Hartmann University of Dortmund Department of Civil Engineering 4600 Dortmund 50 FRG ISBN-13: 978-3-642-48875-7 e-ISBN-13: 978-3-642-48873-3 001: 10.1007/978-3-642-48873-3 Library of Congress Cataloging-in-Publication Data Hartmann, F. (Friedel) Introduction to boundary elements: theory and applications/Friedel Hartmann. ISBN-13: 978-3-642-48875-7 1. Boundary value problems. I. Title. TA347.B69H371989 515.3'5--dc19 89-4160 This work is subject to copyright. All rights are reserved, whether the whole or part of the material is concerned, specifically the rights of translation, reprinting, re-use of illustrations, recitation, broadcasting, reproduction on microfilms or in other ways, and storage in data banks. Duplication of this publication or parts thereof is only permitted under the provision of the German Copyright Law of September 9,1965, in its version of June 24,1985, and a copyright fee must always be paid. Violations fall under the prosecution act of the German Copyright Law. © Springer-Verlag Berlin Heidelberg 1989 Softcover reprint of the hardcover 1 st edition 1989 The use of registered names, trademarks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use.

Download or read book Slope Analysis Using Boundary Elements written by Yansheng Jiang and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to provide a new angle on the analysis of slope stability with the Boundary Element Method. The main advantages of BEM are the reduction of the dimensionality of the problem to be solved and accurate selective calculation of internal stresses. This makes it possible, as shown in the book, to develop the algorithms of slip surface analysis of slope more accurate, more rigorous and more easy to be used than in the conventional limit equilibrium methods. The full elastoplastic analysis of slope is also investigated. Besides, the interested reader can find a detailed study of Melan's fundamental solution such as its displacements, its corresponding Galerkin tensor and the treatment of body forces in the half-plan. The basic theory of BEM is outlined in the book so that undergraduate and graduate students of civil engineering, mining engineering and engineering geology can read it without difficulty.

Download or read book Boundary Element Techniques written by C. A. Brebbia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: VI SOCRATES: I think that we ought to stress that we will write only about things that we have first hand experience in, in a coherent way that will be useful to engineers and other scientists and stressing the formulation without being too mathematical. We should write with integrity and honesty, giving reference to other authors where reference is due, but avoiding mentioning everybody just to be certain that our book is widely advertised. Above all, the book should be clear and useful. PLATO: I think we should include a good discussion of fundamental ideas, of how integral equations are formed, pointing out that they are like two dimensional shadows of three dimensional objects, ... SOCRATES: Stop there! Remember you are not 'the' Plato! PLATO: Sorry, I was carried away. ARISTOTLE: I think that the book should have many applications so that the reader can learn by looking at them how to use the method. SOCRATES: I agree. But we should be careful. It is easy to include many illustra tions and examples in a book in order to disguise its meagre contents. All examples should be relevant. ARISTOTLE: And we should also include a full computer program to give the reader if so he wishes, a working experience of the technique.

Download or read book Boundary Elements XIII written by C.A. Brebbia and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1005 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its origin in 1978, the International Conference on Boundary Element Methods has provided the recognized and established forum for innovations in boundary element research. Practically all new ideas on boundary ele ments have been presented at these conferences and the resulting papers can be found in the published books. The conference brings together the most renowned scientists and engineers working on boundary element research throughout the world. A unique feature of these meetings is that the participation of younger researchers is actively encouraged by the organizers in an effort to .bring forward to the attention of the international community an ever expanding range of new ideas. This book contains the edited version of the papers presented at the XIIIth BEM Conference held in Tulsa, Oklahoma in August of 1991. The meeting attracted a large number of participants and many excellent contributions which have been divided into nineteen different sections, i.e. Potential Prob lems; Diffusion and Convection Problems; Fluid Mechanics; Fluid Flow; Wave Propagation; Groundwater Flow; Heat Transfer; Electrical Problems; Geomechanics; Plates and Shells; Inelastic Problems; Damage Tolerance; Contact Mechanics; Industrial Applications; Design Sensitivity and Opti mization; Inverse Problems; Special Techniques; Numerical Aspects and Computational Aspects.

Download or read book Modern Practice in Stress and Vibration Analysis written by J. E. Mottershead and published by Elsevier. This book was released on 2016-06-23 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Practice in Stress and Vibration Analysis documents the proceedings of the conference on Modern Practice in Stress and Vibration Analysis organized by the Stress Analysis Group of the Institute of Physics at the University of Liverpool, 3-5 April 1989. The Group has been known in the UK for its contribution in providing meetings with an emphasis on application, covering topics which range widely to include modern numerical techniques and advanced experimentation. The volume contains 34 papers presented by researchers at the conference covering a wide range of topics such as the application of the sensitivity analysis method to structural dynamics; passive and active vibration control for use in vibration suppression in spacecraft; analysis of an ultrasonically excited thick cylinder; and the prediction of vibrational power transmission through a system of jointed beams carrying longitudinal and flexural waves. It is hoped that the contributions published in this book will be of value to the broad community of practitioners in stress and vibration analysis whom the Stress Analysis Group exists to serve.

Download or read book Advanced Boundary Element Methods written by Thomas A. Cruse and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IUTAM Symposium on Advanced Boundary Element Methods brought together both established and current researchers in the broad context of applications of BEM technology. The goal of the Symposium was to provide both a formal and an informal forum for the interchange of ideas and the stimulation of new research directions.

Download or read book The Boundary Element Method in Engineering written by Adib A. Becker and published by McGraw-Hill Companies. This book was released on 1992 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Methods in Geomechanics Volume 1 written by G. Swoboda and published by Routledge. This book was released on 2017-11-01 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2017. Routledge is an imprint of Taylor & Francis, an Informa company.

Download or read book Developments in Boundary Element Methods written by P.K. Banerjee and published by CRC Press. This book was released on 2005-12-07 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nine detailed survey chapters by different authors present a number of applications of BEMs.

Download or read book Boundary Element Analysis of Viscous Flow written by Koichi Kitagawa and published by Springer Science & Business Media. This book was released on 2013-03-08 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, the performance of digital computers has been improved by the rapid development of electronics at remarkable speed. In addition, substantial research has been carried out in developing numerical analysis techniques. Nowadays, a variety of problems in the engineering and scientific fields can be solved by using not only super computers but also personal computers. After the first book titled "Boundary Element" was published by Brebbia in 1978, the boundary element method (BEM) has been recognized as a powerful numerical technique which has some advantages over the finite difference method (FDM) and finite element method (FEM). A great amount of research has been carried out on the applications of BEM to various problems. The numerical analysis of fluid mechanics and heat transfer problems plays a key role in analysing some phenomena and it has become recognized as a new research field called "Computational Fluid Dynamics". In partic ular, the analysis of viscous flow including thermal convection phenomena is one of the most important problems in engineering fields. The FDM and FEM have been generally .applied to solve these problems because of non singularities of governing equations.

Download or read book Stress Analysis by Boundary Element Methods written by J. Balaš and published by Elsevier. This book was released on 2013-10-22 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: The boundary element method is an extremely versatile and powerful tool of computational mechanics which has already become a popular alternative to the well established finite element method. This book presents a comprehensive and up-to-date treatise on the boundary element method (BEM) in its applications to various fields of continuum mechanics such as: elastostatics, elastodynamics, thermoelasticity, micropolar elasticity, elastoplasticity, viscoelasticity, theory of plates and stress analysis by hybrid methods. The fundamental solution of governing differential equations, integral representations of the displacement and temperature fields, regularized integral representations of the stress field and heat flux, boundary integral equations and boundary integro-differential equations are derived. Besides the mathematical foundations of the boundary integral method, the book deals with practical applications of this method. Most of the applications concentrate mainly on the computational problems of fracture mechanics. The method has been found to be very efficient in stress-intensity factor computations. Also included are developments made by the authors in the boundary integral formulation of thermoelasticity, micropolar elasticity, viscoelasticity, plate theory, hybrid method in elasticity and solution of crack problems. The solution of boundary-value problems of thermoelasticity and micropolar thermoelasticity is formulated for the first time as the solution of pure boundary problems. A new unified formulation of general crack problems is presented by integro-differential equations.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1964 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Boundary Element Methods written by S. Kobayashi and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Boundary Element Methods (BEM) has become one of the most efficient tools for solving various kinds of problems in engineering science. The International Association for Boundary Element Methods (IABEM) was established in order to promote and facilitate the exchange of scientific ideas related to the theory and applications of boundary element methods. The aim of this symposium is to provide a forum for researchers in boundary element methods and boundary-integral formulations in general to present contemporary concepts and techniques leading to the advancement of capabilities and understanding of this com putational methodology. The topics covered in this symposium include mathematical and computational aspects, applications to solid mechanics, fluid mechanics, acoustics, electromagnetics, heat transfer, optimization, control, inverse problems and other interdisciplinary problems. Papers deal ing with the coupling of the boundary element method with other computational methods are also included. The editors hope that this volume presents some innovative techniques and useful knowl edge for the development of the boundary element methods. February, 1992 S. Kobayashi N. Nishimura Contents Abe, K.

Download or read book The Boundary Element Method Volume 2 written by M. H. Aliabadi and published by John Wiley & Sons. This book was released on 2002-04-29 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: The boundary element method (BEM) is a modern numerical technique, which has enjoyed increasing popularity over the last two decades, and is now an established alternative to traditional computational methods of engineering analysis. The main advantage of the BEM is its unique ability to provide a complete solution in terms of boundary values only, with substantial savings in modelling effort. This two-volume book set is designed to provide the readers with a comprehensive and up-to-date account of the boundary element method and its application to solving engineering problems. Each volume is a self-contained book including a substantial amount of material not previously covered by other text books on the subject. Volume 1 covers applications to heat transfer, acoustics, electrochemistry and fluid mechanics problems, while volume 2 concentrates on solids and structures, describing applications to elasticity, plasticity, elastodynamics, fracture mechanics and contact analysis. The early chapters are designed as a teaching text for final year undergraduate courses. Both volumes reflect the experience of the authors over a period of more than twenty years of boundary element research. This volume, Applications in Solids and Structures, provides a comprehensive presentation of the BEM from fundamentals to advanced engineering applications and encompasses: Elasticity for 2D, 3D and Plates and Shells Non-linear, Transient and Thermal Stress Analysis Crack Growth and Multi-body Contact Mechanics Sensitivity Analysis and Optimisation Analysis of Assembled Structures. An important feature of this book is the in-depth presentation of BEM formulations in all the above fields, including detailed discussions of the basic theory, numerical algorithms and where possible simple examples are included, as well as test results for practical engineering applications of the method. Although most of the methods presented are the latest developments in the field, the author has included some simple techniques, which are helpful in understanding the computer implementation of BEM. Another notable feature is the comprehensive presentation of a new generation of boundary elements known as the Dual Boundary Element Method. Written by an internationally recognised authority in the field, this is essential reading for postgraduates, researchers and practitioners in Aerospace, Mechanical and Civil Engineering and Applied Mathematics.