Download or read book Computer Modeling of Free Surface and Pressurized Flows written by M. Hanif Chaudhry and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computers are widely used for the analysis, design, and operation of water resource projects. This gives accurate results, allowing the analysis of complex systems which may not have been possible otherwise, and the investigation and comparison of several different alternatives in a short time, thereby reducing the project costs, optimizing design, and efficient utilization of resources. This volume compiles an edited version of the lecture notes specially prepared by 14 well-known European and North American researchers. Part I deals with free-surface flows. Governing equations are derived and their solution by the finite-difference, finite-element, and boundary-integral methods are discussed. Then, turbulence models, three-dimensional models, dam-break flow models, sediment transport models, and flood routing models are presented. Part II is related to the modeling of steady and transient pressurized flows. Governing equations for both single and two-component flows are derived and numerical methods for their solution are presented. The modeling of water quality in pipe networks, of cooling water systems, and slow and rapid transients is then discussed.
Download or read book Waterhammer Analysis written by John Parmakian and published by . This book was released on 1955 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water Hammer Research written by Kaveh Hariri Asli and published by CRC Press. This book was released on 2013-01-22 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a broad understanding of the main computational techniques used for water hammer research in water systems. The theoretical background to a number of techniques is introduced, and general data analysis techniques and examining the application of techniques in an industrial setting, including current practices and current research, are considered. The book also provides practical experience of commercially available systems and includes small-scale water systems related projects.
Download or read book Water Hammer in Pipe Line Systems written by J. Záruba and published by Elsevier. This book was released on 1993-05-05 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The physical principles of water hammer are explained in this volume. The basic mathematical methods of solution of water hammer and ways of limiting its effects are covered. Detailed description is given of the method of characteristics and the corresponding programs for personal computers, which enables solution of water hammer in a wide variety of hydraulic systems encountered in practice. Examples are given of solution of water hammer of common pipe-line systems as well as calculation of the steady state of flow, the determination of discharge through a pipe-line, measurements of characteristics of valves, pumps, turbines, determination of the operating régime of a valve in order to ensure a desired pressure and discharge curve, etc. This book will be of interest to those civil, mechanical and petroleum engineers dealing with the design and operation of hydraulic systems.
Download or read book Applied Hydraulic Transients written by M. Hanif Chaudhry and published by Van Nostrand Reinhold Company. This book was released on 1987 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water Hammer written by Bruce Sharp and published by Elsevier. This book was released on 1995-12-01 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water hammer, or the study of fluid transient behaviour, is one of the most common problems in the water engineering community. This book covers the many causes and solutions in a practical way and is an essential reference for all those concerned with the flow of liquids, not just water, in pipe systems. It follows on from the authors' previous monograph on the problems and solutions of water hammer and presents common problems in the form of case studies.This is an interesting and useful read for practising engineers working in this area and it will enable them to make comparisons with their own problems. Also the practical nature of the book makes it useful for civil engineering departmental libraries and departments where hydraulic design is taught.
Download or read book Multiphysics Modelling and Simulation for Systems Design and Monitoring written by Mohamed Haddar and published by Springer. This book was released on 2015-01-03 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the state of the art in the field of multiphysics systems. It consists of accurately reviewed contributions to the MMSSD’2014 conference, which was held from December 17 to 19, 2004 in Hammamet, Tunisia. The different chapters, covering new theories, methods and a number of case studies, provide readers with an up-to-date picture of multiphysics modeling and simulation. They highlight the role played by high-performance computing and newly available software in promoting the study of multiphysics coupling effects, and show how these technologies can be practically implemented to bring about significant improvements in the field of design, control and monitoring of machines. In addition to providing a detailed description of the methods and their applications, the book also identifies new research issues, challenges and opportunities, thus providing researchers and practitioners with both technical information to support their daily work and a new source of inspiration for their future research.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book HYDROLOGY AND WATERSHED MANAGEMENT written by K. Ramamohan Reddy and published by Allied Publishers. This book was released on 2014-10-20 with total page 1310 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Proceeding contains the following sections: i) Groundwater Exploration and Exploitation; (ii) RS&GIS Applications in Water Resources; (iii) Watershed Management: Hydrological, Socio-Economic and Cultural Models; (iv) Water and Wastewater Treatment Technologies; (v) Rainwater Harvesting and Rural and Urban Water Supplies; (vi) Floods, Reservoir Sedimentation and Seawater Intrusion; (vii) Water Quality, Pollution and Environment; (viii) Irrigation Management; (ix) Water Logging and Water Productivity in Agriculture; (x) Groundwater Quality; (xi) Hydrologic Parameter Estimation and Modelling; (xii) Climate Change, Water, Food and Environmental Security; (xiii) Groundwater Recharge and Modelling; (xiv) Computational Methods in Hydrology; (xv) Soil and Water Conservation Technologies.
Download or read book Selected Problems in Fluid Flow and Heat Transfer written by Artur J. Jaworski and published by MDPI. This book was released on 2019-09-20 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid flow and heat transfer processes play an important role in many areas of science and engineering, from the planetary scale (e.g., influencing weather and climate) to the microscopic scales of enhancing heat transfer by the use of nanofluids; understood in the broadest possible sense, they also underpin the performance of many energy systems. This topical Special Issue of Energies is dedicated to the recent advances in this very broad field. This book will be of interest to readers not only in the fields of mechanical, aerospace, chemical, process and petroleum, energy, earth, civil ,and flow instrumentation engineering but, equally, biological and medical sciences, as well as physics and mathematics; that is, anywhere that “fluid flow and heat transfer” phenomena may play an important role or be a subject of worthy research pursuits.
Download or read book Internal Flow Systems written by Donald S. Miller and published by Bhra Fluid Engineering. This book was released on 1978 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Approximate Methods in the Design and Analysis of Pressure Vessels and Piping Components 1997 written by W. J. Bees and published by . This book was released on 1997 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains 29 papers presented in three sessions of the July 1997 conference: mechanical integrity of equipment in pressure swing adsorption service; valve and piping dynamics; weld residual stresses; and power plant piping and support. Topics include an overview of PSA vessel technology, including gu
Download or read book Hydraulics of Pipeline Systems written by Bruce E. Larock and published by CRC Press. This book was released on 1999-09-28 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of its kind, this modern, comprehensive text covers both analysis and design of piping systems. The authors begin with a review of basic hydraulic principles, with emphasis on their use in pumped pipelines, manifolds, and the analysis and design of large pipe networks. After the reader obtains an understanding of how these principles are implemented in computer solutions for steady state problems, the focus then turns to unsteady hydraulics. These are covered at three levels:
Download or read book IRRIGATION AND WATER POWER ENGINEERING written by MADAN MOHAN DAS and published by PHI Learning Pvt. Ltd.. This book was released on 2009-01-24 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed primarily as a textbook for the undergraduate students of civil and agricultural engineering, this comprehensive and well-written text covers irrigation system and hydroelectric power development in lucid language. The text is organized in two parts. Part I (Irrigation Engineering) deals with the methods of water distribution to crops, water requirement of crops, soil-water relationship, well irrigation and hydraulics of well, canal irrigation and different theories of irrigation canal design. Part II (Water Power Engineering) offers the procedures of harnessing the hydropotential of river valleys to produce electricity. It also discusses different types of dams, surge tanks, turbines, draft tubes, power houses and their components. The text emphasizes on the solutions of unsteady equations of surge tank and pipe carrying water to power house under water hammer situation. It also includes computer programs for the numerical solutions of hyperbolic partial differential equations. KEY FEATURES : Provides worked out examples and problems (in SI units). Presents all possible methods of design including Ranga-Raju-Misri’s new approach of canal design. Gives numerous illustrations to reinforce the understanding of the subject. Besides undergraduate students, this book will also be of immense use to the postgraduate students of water resources engineering.
Download or read book Mathematical Concepts for Mechanical Engineering Design written by Kaveh Hariri Asli and published by CRC Press. This book was released on 2016-04-19 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Concepts for Mechanical Engineering Design provides a broad understanding of the main computational techniques used for simulation of water distribution networks and water transmission systems. It introduces the theoretical background to a number of techniques and general data analysis techniques. The book also examines the application of techniques in an industrial setting, including current practices and current research, are presented. It provides practical experience of commercially available systems and includes a small-scale water systems related projects. The authors illustrate the concepts and techniques covered in the book by using a calculation that simulates water distribution networks and water transmission systems. The book also covers significant research on new methodologies and important applications in the fields of automation and control as well as includes the latest coverage of chemical databases and the development of new computational methods and efficient algorithms for hydraulic software and mechanical engineering. The book will be informative and useful to both academics and mechanical engineers in various industrial sectors, including hydraulic and mechanical engineering.
Download or read book Advances in Acoustics and Vibration III written by Nabih Feki and published by Springer Nature. This book was released on 2021-05-29 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides readers with a snapshot of recent research and industrial trends in field of industrial acoustics and vibration. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the Third International Conference on Acoustics and Vibration (ICAV2021), which was organized by the Tunisian Association of Industrial Acoustics and Vibration (ATAVI) and held online on March 15-16, 2021, from Sfax, Tunisia. The contributions cover advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others. This book provides a valuable resource for both academics and professionals dealing with diverse issues in applied mechanics. By combining advanced theories with industrial issues, it is expected to facilitate communication and collaboration between different groups of researchers and technology users.
Download or read book Design and Modeling of Mechanical Systems written by Mohamed Haddar and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 5th International Congress on Design and Modeling of Mechanical Systems (CMSM) was held in Djerba, Tunisia on March 25-27, 2013 and followed four previous successful editions, which brought together international experts in the fields of design and modeling of mechanical systems, thus contributing to the exchange of information and skills and leading to a considerable progress in research among the participating teams. The fifth edition of the congress (CMSM ́2013), organized by the Unit of Mechanics, Modeling and Manufacturing (U2MP) of the National School of Engineers of Sfax, Tunisia, the Mechanical Engineering Laboratory (MBL) of the National School of Engineers of Monastir, Tunisia and the Mechanics Laboratory of Sousse (LMS) of the National School of Engineers of Sousse, Tunisia, saw a significant increase of the international participation. This edition brought together nearly 300 attendees who exposed their work on the following topics: mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, design and manufacturing of mechanical systems. This book is the proceedings of CMSM ́2013 and contains a careful selection of high quality contributions, which were exposed during various sessions of the congress. The original articles presented here provide an overview of recent research advancements accomplished in the field mechanical engineering.
