Download or read book Airco written by Mick Davis and published by Crowood Press (UK). This book was released on 2001 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the years prior to World War I, George Holt Thomas was an active supporter of aviation development and a promoter of its military potential. The pace of development saw him employing a young and talented aircraft designer by the name of Geoffrey de Havilland, and the aircraft they produced went on to make history.
Download or read book Airplane Manufacturing in Farmingdale written by Ken Neubeck and published by Arcadia Publishing. This book was released on 2016-03-28 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Farmingdale, located in west-central Long Island on both sides of the Nassau-Suffolk County border, was an important center of airplane manufacturing from the First World War until almost the end of the Cold War. Aviation pioneers like Lawrence Sperry, Sherman Fairchild, Leroy Grumman, Alexander de Seversky, and Alexander Kartveli directed the manufacture of aircraft, aircraft engines, and key subassemblies as they evolved from the propeller, biplane era to the jet and space age. Farmingdale witnessed the creation of such cutting-edge aircraft as the Sperry Triplane Amphibian and Messenger; the Fairchild FC-2; the Grumman FF-1, JF-1 Duck, and G-22 Gulfhawk; the Seversky P-35; the Republic Aviation P-47, F-84, and F-105; and the Fairchild Republic space shuttle tails and A-10 Warthog. Airplane manufacturing in Farmingdale ended in 1987 with the demise of Fairchild Republic, but this book offers a comprehensive pictorial history of the outstanding achievements of so many talented men and women over seven decades.
Download or read book Aerospace Manufacturing Processes written by Pradip K. Saha and published by CRC Press. This book was released on 2016-09-19 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing processes for aircraft components include broad activities consisting of multiple materials processing technologies. This book focuses on presenting manufacturing process technologies exclusively for fabricating major aircraft components. Topics covered in a total of twenty chapters are presented with a balanced perspective on the relevant fundamentals and various examples and case studies. An individual chapter is aimed at discussing the scope and direction of research and development in producing high strength lighter aircraft materials, and cost effective manufacturing processes are also included.
Download or read book Additive Manufacturing for the Aerospace Industry written by Francis H. Froes and published by Elsevier. This book was released on 2019-02-15 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive Manufacturing for the Aerospace Industry explores the design, processing, metallurgy and applications of additive manufacturing (AM) within the aerospace industry. The book's editors have assembled an international team of experts who discuss recent developments and the future prospects of additive manufacturing. The work includes a review of the advantages of AM over conventionally subtractive fabrication, including cost considerations. Microstructures and mechanical properties are also presented, along with examples of components fabricated by AM. Readers will find information on a broad range of materials and processes used in additive manufacturing. It is ideal reading for those in academia, government labs, component fabricators, and research institutes, but will also appeal to all sectors of the aerospace industry. - Provides information on a broad range of materials and processes used in additive manufacturing - Presents recent developments in the design and applications of additive manufacturing specific to the aerospace industry - Covers a wide array of materials for use in the additive manufacturing of aerospace parts - Discusses current standards in the area of aerospace AM parts
Download or read book Pushing the Envelope written by Donald M. Pattillo and published by University of Michigan Press. This book was released on 1998 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive history of the aircraft manufacturing industry to date
Download or read book The Jet Makers written by Charles D. Bright and published by University Press of Kansas. This book was released on 2021-10-08 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the history of the American jet aircraft manufacturing industry from World War II to 1972, documenting the evolution of its technology and covering the intricacies of its management, economics, and relations with the government. A valuable contribution to general aviation history, it also provides a unique opportunity to study the dynamic of a major U.S. industry. Charles D. Bright traces the momentous revolution of the aerospace era from birth to maturity, using as a base the jet aircraft industry. He investigates all significant aspects: the coming-of-age of aviation during World War II, including global transportation and aerodynamics; the development of jets and missiles from the Truman era to the Vietnam War; the controlling influence of national military strategy; the U.S. Air Force and other government markets; the mechanics of government procurement—bidding, pricing, buying; difficulties in the commercial airliner business; the ordering of technology and the prevailing “design or die” philosophy; and different systems of production through the years. Special attention is given to major problems such as the industry’s need for diversification and the skyrocketing costs that threaten to make aerospace products uneconomical. The conventional economic concerns of entry into and exit from the industry are treated in depth. Bright focuses on the overall economic pattern, from the first demand for aerospace machines for military, space, and commercial uses to the failures of recent times as the industry entered recession and peacetime equilibrium. He tells of the desperate competition among giants of the industry, those companies on the frontiers of technology that manufactured fixed-wing aircraft of their own design. This is the group that bore the brunt of adaptation to the jet age: Boeing, Curtiss-Wright, Douglas, Fairchild, General Dynamics, Grumman, Lockheed, martin, McDonnell, North American Northrop, and Republic. Central to the story are the reasons for America’s leadership in the jet age: enterprising business managers, scientists, and engineers; the pressure of economics; and manifold competition brought on by economics; and manifold competition brought on by the cold war. Bright points to an industry that has responded to incredible demands and that has shown the strength to weather storms. This volume is illustrated with fifty-five photographs depicting the growth in aircraft technology from 1945 to 1972. As a unique blend of aeronautic, economic, business, and military history, ikt will fascinate not only those connected with aviation and the aerospace industry, but also those interested in the history of technology, business management, and government-military-business relations. The Jet Makers received Honorable Mention in the 1977 History Manuscript award competition of the American Institute of Aeronautics and Astronautics.
Download or read book Manufacturing Technology for Aerospace Structural Materials written by Flake C Campbell Jr and published by Elsevier. This book was released on 2011-08-31 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly-expanding aerospace industry is a prime developer and user of advanced metallic and composite materials in its many products. This book concentrates on the manufacturing technology necessary to fabricate and assemble these materials into useful and effective structural components. Detailed chapters are dedicated to each key metal or alloy used in the industry, including aluminum, magnesium, beryllium, titanium, high strength steels, and superalloys. In addition the book deals with composites, adhesive bonding and presents the essentials of structural assembly. This book will be an important resource for all those involved in aerospace design and construction, materials science and engineering, as well as for metallurgists and those working in related sectors such as the automotive and mass transport industries. Flake Campbell Jr has over thirty seven years experience in the aerospace industry and is currently Senior Technical Fellow at the Boeing Phantom Works in Missouri, USA.* All major aerospace structural materials covered: metals and composites* Focus on details of manufacture and use* Author has huge experience in aerospace industry* A must-have book for materials engineers, design and structural engineers, metallurgical engineers and manufacturers for the aerospace industry
Download or read book Building Victory written by and published by . This book was released on 2013-10-17 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: World War II was the greatest airborne clash of arms in history. America?s aircraft manufacturers went from a near standing start in the late 1930?s to producing tens of thousands of planes per year. By the end of the war, they built a phenomenal 300,000 planes, a feat that most (including the German high command) thought impossible. They manufactured more aircraft in one year than had been produced in all the pre-war years since the Wright brothers invented the airplane. The Los Angeles area was the center of this remarkable effort, being the headquarters for Douglas Aircraft, Hughes, Lockheed, North American Aviation, Northrop and Vultee, as well as countless subcontractors. Thousands of aircraft workers enlisted or were drafted, leaving manufacturers with huge orders and few experienced employees. They responded by hiring women, students, disabled people and others who might not otherwise have been considered for production positions. Housewives and others with little mechanical experience rolled up their sleeves, learned fast, and brought forth an industrial achievement that ranks among America?s greatest accomplishments. Aircraft manufacturers, museums and libraries have generously opened their special collections of photographs to the author for use in this volume. Many have never been published before.
Download or read book Picture History of World War II American Aircraft Production written by Joshua Stoff and published by Courier Corporation. This book was released on 1993-12-13 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 250 rare photographs depict one of the greatest industrial feats of all time: America's massive production of World War II fighters and bombers. An introduction and captions outline the history.
Download or read book The Global Commercial Aviation Industry written by Sören Eriksson and published by Routledge. This book was released on 2015-07-16 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a state-of-the-art overview of the changes and development of the civil international aircraft/aviation industry. It offers a fully up-to-date account of the international developments and structure in the aircraft and aviation industries from a number of perspectives, which include economic, geographical, political and technological points of view. The aircraft industry is characterized by very complex, high technology products produced in relatively small quantities. The high-technology requirements necessitate a high level of R&D. In no other industry is it more of inter-dependence and cross-fertilisation of advanced technology. Consequently, most of the world’s large aircraft companies and technology leaders have been located in Europe and North America. During the last few decades many developing countries have tried to build up an internationally competitive aircraft industry. The authors study a number of important issues including the political economy of the aircraft industry, globalization in this industry, innovation, newly industrializing economies and the aircraft industry. This book also explores regional and large aircraft, transformation of the aviation industry in Central and Eastern Europe, including engines, airlines, airports and airline safety. It will be of great value to students and to researchers seeking information on the aircraft industry and its development in different regions.
Download or read book Industry and Air Power written by Sebastian Ritchie and published by Taylor & Francis. This book was released on 1997 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author examines the relationship between industry and the state during the period immediately before the Second World War when increasing tension resulted in large government contracts.
Download or read book Materials Structures and Manufacturing for Aircraft written by Melih Cemal Kuşhan and published by Springer Nature. This book was released on 2022-04-25 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive look at materials science topics in aerospace, air vehicle structures and manufacturing methods for aerospace products, examining recent trends and new technological developments. Coverage includes additive manufacturing, advanced material removal operations, novel wing systems, design of landing gear, eco-friendly aero-engines, and light alloys, advanced polymers, composite materials and smart materials for structural components. Case studies and coverage of practical applications demonstrate how these technologies are being successfully deployed. Materials, Structures & Manufacturing for Aircraft will appeal to a broad readership in the aviation community, including students, engineers, scientists, and researchers, as a reference source for material science and modern production techniques.
Download or read book Air Transport Management written by Lucy Budd and published by Taylor & Francis. This book was released on 2016-11-10 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Commercial air transport is a global multimillion dollar industry that underpins the world economy and facilitates the movement of over 3 billion passengers and 50 million tonnes of air freight worldwide each year. With a clearly structured topic-based approach, this textbook presents readers with the key issues in air transport management, including: aviation law and regulation, economics, finance, airport and airline management, environmental considerations, human resource management and marketing. The book comprises carefully selected contributions from leading aviation scholars and industry professionals worldwide. To help students in their studies the book includes case studies, examples, learning objectives, keyword definitions and ‘stop and think’ boxes to prompt reflection and to aid understanding. Air Transport Management provides in-depth instruction for undergraduate and postgraduate students studying aviation and business management-related degrees. It also offers support to industry practitioners seeking to expand their knowledge base.
Download or read book Competition in the U S Aircraft Manufacturing Industry written by United States. Congress. House. Committee on Transportation and Infrastructure. Subcommittee on Aviation and published by . This book was released on 2001 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The History of the American Aircraft Industry written by Massachusetts institute of technology and published by . This book was released on 1968 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The American Aircraft Factory in World War II written by Bill Yenne and published by Zenith Press. This book was released on 2010-09-10 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Few industrial phenomena have been as dramatic as the United States’ mid-20th-century shift from peacetime to wartime production. The American Aircraft Factory in World War II documents the production of legendary warbirds by companies like Boeing, North American, Curtiss, Consolidated, Douglas, Grumman, and Lockheed. It was a production unmatched by any other country and a crucial part of why the allies won the war. Author Bill Yenne considers the prewar governmental acts that got the plants rolling, as well as the gender shift that occurred as women entered the work force like never before. He also describes the construction of megafactories like Willow Run, factory design considerations, and the postwar conversion back to peacetime production. Illustrated with 175 period photographs—including 50 rare color photos never before seen in print.
Download or read book The Business of Aerospace written by Antoine Gélain and published by American Institute of Aeronautics and Astronautics Incorporated. This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organised by themes and complemented by brief commentaries introducing underlying business concepts or additional information, these reader-friendly columns cover a broad enough range of issues to provide a comprehensive, 360-degree view of the key themes relevant to the business of aerospace today.
