Download or read book Special Issue of the Manufacturing Engineering Society 2019 SIMES 2019 written by Eva M. Rubio and published by MDPI. This book was released on 2020-07-03 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book derives from the Special Issue of the Manufacturing Engineering Society 2019 (SIMES-2019) that has been launched as a joint issue of the journals Materials and Applied Sciences. The 29 contributions published in this Special Issue of Materials present cutting-edge advances in the field of manufacturing engineering focusing on additive manufacturing and 3D printing; advances and innovations in manufacturing processes; sustainable and green manufacturing; manufacturing of new materials; metrology and quality in manufacturing; industry 4.0; design, modeling, and simulation in manufacturing engineering; and manufacturing engineering and society. Among them, the topic "Additive Manufacturing and 3D Printing" has attracted a large number of contributions in this journal due to its widespread popularity and potential.

Download or read book The 4th Manufacturing Engineering Society International Conference MESIC 2011 written by Mariano Marcos and published by A I P Press. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Continues the tasks of the three previous conferences and that accomplish the objectives of the Manufacturing Engineering Society: the knowledge spreading in the scope of Manufacturing Engineering.

Download or read book Advances in Computational Methods in Manufacturing written by R. Ganesh Narayanan and published by Springer Nature. This book was released on 2019-10-17 with total page 1064 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a selection of papers from the 2nd International Conference on Computational Methods in Manufacturing (ICCMM 2019). The papers cover the recent advances in computational methods for simulating various manufacturing processes like machining, laser welding, laser bending, strip rolling, surface characterization and measurement. Articles in this volume discuss both the development of new methods and the application and efficacy of existing computational methods in manufacturing sector. This volume will be of interest to researchers in both industry and academia working on computational methods in manufacturing.

Download or read book Strategic Innovative Marketing written by Androniki Kavoura and published by Springer. This book was released on 2016-09-26 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest on the theoretical approach of the contemporary issues evolved in strategic marketing and the integration of theory and practice. It seeks to make advancements in the discipline by promoting strategic research and innovative activities in marketing. The book highlights the use of data analytics, intelligence and knowledge-based systems in this area. In the era of knowledge-based economy, marketing has a lot to gain from collecting and analyzing data associated with customers, business processes, market economics or even data related to social activities. The contributed chapters are concerned with using modern qualitative and quantitative techniques based on information technology used to manage and analyze business data, to discover hidden knowledge and to introduce intelligence into marketing processes. This allows for a focus on innovative applications in all aspects of marketing, of computerized technologies related to data analytics, predictive analytics and modeling, business intelligence and knowledge engineering, in order to demonstrate new ways of uncovering hidden knowledge and supporting marketing decisions with evidence-based intelligent tools. Among the topics covered include innovative tourism marketing strategies, marketing communications in small and medium-sized enterprises (SMEs), the use of business modeling, as well as reflecting on the marketing trends and outlook for all transportation industry segments. The papers in this proceedings has been written by scientists, researchers, practitioners and students that demonstrate a special orientation in strategic marketing, all of whom aspire to be ahead of the curve based on the pillars of innovation. This proceedings volume compiles their contributions to the field, highlighting the exchange of insights on strategic issues in the science of innovation marketing.

Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Michael F. Zaeh and published by Springer Science & Business Media. This book was released on 2013-09-12 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2013) is "Enabling Manufacturing Competitiveness and Economic Sustainability. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems' economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability, scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented. About the Editor Prof. Dr.-Ing. Michael F. Zaeh, born in 1963, has been and is Professor for and Manufacturing Technology since 2002 and, together with Prof. Dr.-Ing. Gunther Reinhart, Head of the Institute for Machine Tools and Industrial Management (iwb) at the Technische Universitaet Muenchen (TUM). After studying general mechanical engineering, he was doctoral candidate under Prof. Dr.-Ing. Joachim Milberg at TUM from 1990 until 1993 and received his doctorate in 1993. From 1994 to 1995, he was department leader under Prof. Dr.-Ing. Gunther Reinhart. From 1996 to 2002, he worked for a machine tool manufacturer in several positions, most recently as a member of the extended management. Prof. Dr.-Ing. Michael F. Zaeh is an associated member of the CIRP and member of acatech, WGP and WLP. His current researches include among others Joining and Cutting Technologies like Laser Cutting and Welding as well as Friction Stir Welding, Structural Behaviour and Energy Efficiency of Machine Tools and Manufacturing Processes like Additive Manufacturing.

Download or read book The 30th SIAR International Congress of Automotive and Transport Engineering written by Ilie Dumitru and published by Springer Nature. This book was released on 2019-10-15 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book includes papers that cover the latest developments in automotive vehicles and environment, advanced transport systems and road traffic, heavy and special vehicles, new materials, manufacturing technologies and logistics and advanced engineering methods. Authors of the papers selected for this book are experts from research, industry and universities, coming from different countries. The overall objectives of the presentations are to respond to the major challenges faced by the automotive industry, and to propose potential solutions to problems related to automotive technology, transportation and environment, and road safety. The congress is organized by SIAR (Society of Automotive Engineers from Romania) in cooperation with SAE International. The purpose is to gather members from academia, industry and government and present their possibilities for investigations and research, in order to establish new future collaborations in the automotive engineering and transport domain. This proceedings book is just a part of the outcomes of the congress. The results presented in this proceedings book benefit researchers from academia and research institutes, industry specialists, Ph.D. students and students in Automotive and Transport Engineering programs.

Download or read book Advanced Manufacturing and Materials Science written by Kurian Antony and published by Springer. This book was released on 2018-05-31 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents selected papers from the international conference on advanced manufacturing and materials sciences (ICAMMS 2018). The papers reflet recent advances in manufacturing sector focusing on process optimization and give emphasis to testing and evaluation of new materials with potential use in industrial applications.

Download or read book Proceedings of the 6th National Symposium on Rotor Dynamics written by J. S. Rao and published by Springer Nature. This book was released on 2020-10-13 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select papers presented during the 6th National Symposium on Rotor Dynamics, held at CSIR-NAL, Bangalore, and focuses on the latest trends in rotor dynamics and various challenges encountered in the design of rotating machinery. The book is of interest to researchers from mechanical, aerospace, tribology and power industries, engineering service providers and academics.

Download or read book Advances in Manufacturing III written by Magdalena Diering and published by Springer Nature. This book was released on 2022-04-15 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers timely contributions on metrology and measurement systems, across different disciplines and fields of applications. The chapters, which were presented at the 7th International Scientific-Technical Conference, MANUFACTURING 2022, held on May 16-19, 2022, in Poznan, Poland, cover cutting-edge research and best-practices concerning the use of optical, computed tomographic, and coordinate metrology systems to assess the fidelity of 3D printing processes and products. They discuss strategies for automating, and for improving the effectiveness of quality control and measuring processes. All in all, this book provides both researchers and practitioners with a timely guide on cutting-edge measuring systems supporting the development of modern and additive manufacturing in the context of industry 4.0.

Download or read book High Value Manufacturing Advanced Research in Virtual and Rapid Prototyping written by Paulo Jorge da Silva Bartolo and published by CRC Press. This book was released on 2013-09-16 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Value Manufacturing is the result of the 6th International Conference on Advanced Research in Virtual and Rapid Prototyping, held in Leiria, Portugal, October 2013. It contains current contributions to the fi eld of virtual and rapid prototyping (V&RP) and is also focused on promoting better links between industry and academia. This volume comprises a collection of more than 110 reviewed papers which cover a wide range of topics, such as Additive and Nano Manufacturing Technologies, Biomanufacturing, Materials, Rapid Tooling and Manufacturing, CAD and 3D Data Acquisition Technologies, Simulation and Virtual Environments, and novel applications. High Value Manufacturing is intended for engineers, designers and manufacturers who are active in the fi elds of mechanical, industrial and biomedical engineering.

Download or read book Innovations in Mechanical Engineering written by José Machado and published by Springer Nature. This book was released on 2021-06-16 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in the field of mechanical engineering, with a special focus on methods and technologies for modeling, simulation, and design of mechanical systems. Based on a set of papers presented at the 1st International Conference “Innovation in Engineering”, ICIE, held in Guimarães, Portugal, on June 28–30, 2021, it focuses on innovation in mechanical engineering, spanning from engineering design and testing of medical devices, evaluation of new materials and composites for different industrial applications, fatigue and stress analysis of mechanical structures, and application of new tools such as 3D printing, CAE 3D models, and decision support systems. This book, which belongs to a three-volume set, provides engineering researchers and professionals with extensive and timely information on new technologies and developments in the field of mechanical engineering and materials.

Download or read book Advances on Mechanics Design Engineering and Manufacturing written by Benoit Eynard and published by Springer. This book was released on 2016-09-02 with total page 1208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing (JCM 2016), held on 14-16 September, 2016, in Catania, Italy. It reports on cutting-edge topics in product design and manufacturing, such as industrial methods for integrated product and process design; innovative design; and computer-aided design. Further topics covered include virtual simulation and reverse engineering; additive manufacturing; product manufacturing; engineering methods in medicine and education; representation techniques; and nautical, aeronautics and aerospace design and modeling. The book is divided into eight main sections, reflecting the focus and primary themes of the conference. The contributions presented here will not only provide researchers, engineers and experts in a range of industrial engineering subfields with extensive information to support their daily work; they are also intended to stimulate new research directions, advanced applications of the methods discussed, and future interdisciplinary collaborations.

Download or read book Abrasive Water Jet Machining of Composites written by Sachin Salunkhe and published by Walter de Gruyter GmbH & Co KG. This book was released on 2024-10-21 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores new possibilities in the domain of abrasive waterjet machining (AWJM) of composites and polymers. AWJM is a sustainable and well industrialized process, but some parameters of AWJM process need to be optimized according to new composites materials and polymers to obtain the desired machining characteristics. This book presents the reader with the state of the art methodology to cut the advanced composite materials.

Download or read book Recent Advances in Material Manufacturing and Machine Learning written by Bjorn Schuller and published by CRC Press. This book was released on 2024-06-17 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main aim of the 2nd international conference on recent advances in materials manufacturing and machine learning processes-2023 (RAMMML-23) is to bring together all interested academic researchers, scientists, engineers, and technocrats and provide a platform for continuous improvement of manufactur□ing, machine learning, design and materials engineering research. RAMMML 2023 received an overwhelm□ing response with more than 530 full paper submissions. After due and careful scrutiny, about 120 of them have been selected for presentation. The papers submitted have been reviewed by experts from renowned institutions, and subsequently, the authors have revised the papers, duly incorporating the suggestions of the reviewers. This has led to significant improvement in the quality of the contributions, Taylor & Francis publications, CRC Press have agreed to publish the selected proceedings of the conference in their book series of Advances in Mechanical Engineering and Interdisciplinary Sciences. This enables fast dissemina□tion of the papers worldwide and increases the scope of visibility for the research contributions of the authors.

Download or read book Advances in Forming Machining and Automation written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-23 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select proceedings of the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers in this volume focus on forming and machining, and discuss both conventional technologies and the latest developments and innovations, including both experimental studies and simulations; while those on automation present the latest research on hardware as well as software aspects. This volume will be of interest to researchers, and practicing engineers alike.

Download or read book Service Orientation in Holonic and Multi Agent Manufacturing written by Theodor Borangiu and published by Springer. This book was released on 2018-12-12 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed papers presented at the 8th edition of the International Workshop “Service Orientation in Holonic and Multi-Agent Manufacturing – SOHOMA’18” held at the University of Bergamo, Italy on June 11–12, 2018. The objective of the SOHOMA annual workshops is to foster innovation in smart and sustainable manufacturing and logistics systems by promoting new concepts, methods and solutions that use service orientation of agent-based control technologies with distributed intelligence. Reflecting the theme of SOHOMA’18: “Digital transformation of manufacturing with agent-based control and service orientation of Internet-scale platforms”, the research included focuses on how the digital transformation, as advocated by the “Industry 4.0”, “Industrial Internet of Things”, “Cyber-Physical Production Systems” and “Cloud Manufacturing” frameworks, improves the efficiency, agility and sustainability of manufacturing processes, products, and services, and how it relates to the interaction between the physical and informational worlds, which is implemented in the virtualization of products, processes and resources managed as services.

Download or read book Advances in Simulation Product Design and Development written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-06 with total page 839 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select proceedings of the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers in this volume discuss simulations based on techniques such as finite element method (FEM) as well as soft computing based techniques such as artificial neural network (ANN), their optimization and the development and design of mechanical products. This volume will be of interest to researchers, policy makers, and practicing engineers alike.