Download or read book The 2 x 4 Model written by Robert Andrew Chambers and published by CRC Press. This book was released on 2017-12-06 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over a quarter century of studies have shown that addictions, mental illnesses, and their combinations (dual diagnoses) are pervasive in the general population. Meanwhile, emerging neuroscience is revealing that the neurodevelopmental basis of major mental illness and addiction diseases are tightly interconnected and often unified pathologies of the brain. This science calls into question the profound split between the addiction and mental health fields that define our fragmented research, professional training, and treatment delivery systems—a split that leaves most patients out of reach of adequate professional expertise and evidence-based standards of care. The 2 x 4 Model, as described in this translational textbook of Addiction Psychiatry, is the essential blueprint and operational manual for the fully integrated, expertly staffed, Dual Diagnosis clinic— a clinic that is maximally capable and efficient in treating the full spectrum of addictions, mental illness, and their comorbidities, through integration of psychotherapies and medications, by one team under one roof. Replication of 2 x 4 Model Clinics into a national system would allow widespread access to excellent, transparent standards of Addiction Psychiatry as a decisive measure against mass incarceration and the exploding health care crisis of untreated addictions, all while rebuilding brain health as a core public health, social and economic imperative of modern society.
Download or read book Handbook of Microscopy for Nanotechnology written by Nan Yao and published by Springer Science & Business Media. This book was released on 2005-03-21 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanostructured materials take on an enormously rich variety of properties and promise exciting new advances in micromechanical, electronic, and magnetic devices as well as in molecular fabrications. The structure-composition-processing-property relationships for these sub 100 nm-sized materials can only be understood by employing an array of modern microscopy and microanalysis tools. Handbook of Microscopy for Nanotechnology aims to provide an overview of the basics and applications of various microscopy techniques for nanotechnology. This handbook highlights various key microcopic techniques and their applications in this fast-growing field. Topics to be covered include the following: scanning near field optical microscopy, confocal optical microscopy, atomic force microscopy, magnetic force microscopy, scanning turning microscopy, high-resolution scanning electron microscopy, orientational imaging microscopy, high-resolution transmission electron microscopy, scanning transmission electron microscopy, environmental transmission electron microscopy, quantitative electron diffraction, Lorentz microscopy, electron holography, 3-D transmission electron microscopy, high-spatial resolution quantitative microanalysis, electron-energy-loss spectroscopy and spectral imaging, focused ion beam, secondary ion microscopy, and field ion microscopy.
Download or read book Hand Sewing Lessons written by Sarah Elwell Krolik and published by . This book was released on 1905 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Statistics for Engineering and the Sciences written by William M. Mendenhall and published by CRC Press. This book was released on 2016-04-05 with total page 2456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepare Your Students for Statistical Work in the Real WorldStatistics for Engineering and the Sciences, Sixth Edition is designed for a two-semester introductory course on statistics for students majoring in engineering or any of the physical sciences. This popular text continues to teach students the basic concepts of data description and statist
Download or read book Canadian Motor Boat written by and published by . This book was released on 1927 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Motor Record written by and published by . This book was released on 1926 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: Including 'Automobile buyers' reference.'
Download or read book Introduction to Computational Models with Python written by Jose M. Garrido and published by CRC Press. This book was released on 2015-08-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Computational Models with Python explains how to implement computational models using the flexible and easy-to-use Python programming language. The book uses the Python programming language interpreter and several packages from the huge Python Library that improve the performance of numerical computing, such as the Numpy and Scipy m
Download or read book Big Data Analytics Using Multiple Criteria Decision Making Models written by Ramakrishnan Ramanathan and published by CRC Press. This book was released on 2017-07-12 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Multiple Criteria Decision Making (MCDM) is a subfield of Operations Research, dealing with decision making problems. A decision-making problem is characterized by the need to choose one or a few among a number of alternatives. The field of MCDM assumes special importance in this era of Big Data and Business Analytics. In this volume, the focus will be on modelling-based tools for Business Analytics (BA), with exclusive focus on the sub-field of MCDM within the domain of operations research. The book will include an Introduction to Big Data and Business Analytics, and challenges and opportunities for developing MCDM models in the era of Big Data.
Download or read book Hydro Environmental Analysis written by James L. Martin and published by CRC Press. This book was released on 2013-12-04 with total page 5742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on fundamental principles, Hydro-Environmental Analysis: Freshwater Environments presents in-depth information about freshwater environments and how they are influenced by regulation. It provides a holistic approach, exploring the factors that impact water quality and quantity, and the regulations, policy and management methods that are necessary to maintain this vital resource. It offers a historical viewpoint as well as an overview and foundation of the physical, chemical, and biological characteristics affecting the management of freshwater environments. The book concentrates on broad and general concepts, providing an interdisciplinary foundation. The author covers the methods of measurement and classification; chemical, physical, and biological characteristics; indicators of ecological health; and management and restoration. He also considers common indicators of environmental health; characteristics and operations of regulatory control structures; applicable laws and regulations; and restoration methods. The text delves into rivers and streams in the first half and lakes and reservoirs in the second half. Each section centers on the characteristics of those systems and methods of classification, and then moves on to discuss the physical, chemical, and biological characteristics of each. In the section on lakes and reservoirs, it examines the characteristics and operations of regulatory structures, and presents the methods commonly used to assess the environmental health or integrity of these water bodies. It also introduces considerations for restoration, and presents two unique aquatic environments: wetlands and reservoir tailwaters. Written from an engineering perspective, the book is an ideal introduction to the aquatic and limnological sciences for students of environmental science, as well as students of environmental engineering. It also serves as a reference for engineers and scientists involved in the management, regulation, or restoration of freshwater environments.
Download or read book The Aubin Academy Master Series AutoCAD MEP 2012 written by Paul Aubin and published by G3B Press. This book was released on 2011-07 with total page 807 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Aubin Academy Master Series: AutoCAD MEP is a concise manual focused squarely on the rationale and practicality of the AutoCAD MEP process. The book emphasizes the process of creating projects in MEP rather than a series of independent commands and tools. The goal of each lesson is to help the reader complete their projects successfully. Tools are introduced together in a focused process with a strong emphasis on "why" as well as "how." The text and exercises seek to give the reader a clear sense of the value of the tools, and a clear indication of each tool's potential. The Aubin Academy Master Series: AutoCAD MEP is a resource designed to shorten your learning curve, raise your comfort level, and, most importantly, give you real-life tested practical advice on the usage of the software to create mechanical, electrical, and plumbing designs, and calculations. Empowered with the information within this book, the reader will have insight into how to use AutoCAD MEP to create construction documents that are reflective of their standards and expectations.
Download or read book Federal Register written by and published by . This book was released on 1944-04 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semiconductor Surfaces and Interfaces written by Winfried Mönch and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Surfaces and Interfaces deals with structural and electronic properties of semiconductor surfaces and interfaces. The first part introduces the general aspects of space-charge layers, of clean-surface and adatom-included surfaces states, and of interface states. It is followed by a presentation of experimental results on clean and adatom-covered surfaces which are explained in terms of simple physical and chemical concepts and models. Where available, results of more refined calculations are considered. A final chapter is devoted to the band lineup at semiconductor interfaces.
Download or read book Loss Models written by Stuart A. Klugman and published by John Wiley & Sons. This book was released on 2012-01-25 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt: An update of one of the most trusted books on constructing and analyzing actuarial models Written by three renowned authorities in the actuarial field, Loss Models, Third Edition upholds the reputation for excellence that has made this book required reading for the Society of Actuaries (SOA) and Casualty Actuarial Society (CAS) qualification examinations. This update serves as a complete presentation of statistical methods for measuring risk and building models to measure loss in real-world events. This book maintains an approach to modeling and forecasting that utilizes tools related to risk theory, loss distributions, and survival models. Random variables, basic distributional quantities, the recursive method, and techniques for classifying and creating distributions are also discussed. Both parametric and non-parametric estimation methods are thoroughly covered along with advice for choosing an appropriate model. Features of the Third Edition include: Extended discussion of risk management and risk measures, including Tail-Value-at-Risk (TVaR) New sections on extreme value distributions and their estimation Inclusion of homogeneous, nonhomogeneous, and mixed Poisson processes Expanded coverage of copula models and their estimation Additional treatment of methods for constructing confidence regions when there is more than one parameter The book continues to distinguish itself by providing over 400 exercises that have appeared on previous SOA and CAS examinations. Intriguing examples from the fields of insurance and business are discussed throughout, and all data sets are available on the book's FTP site, along with programs that assist with conducting loss model analysis. Loss Models, Third Edition is an essential resource for students and aspiring actuaries who are preparing to take the SOA and CAS preliminary examinations. It is also a must-have reference for professional actuaries, graduate students in the actuarial field, and anyone who works with loss and risk models in their everyday work. To explore our additional offerings in actuarial exam preparation visit www.wiley.com/go/actuarialexamprep.
Download or read book Risk Modeling Assessment and Management written by Yacov Y. Haimes and published by John Wiley & Sons. This book was released on 2015-07-17 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents systems-based theory, methodology, and applications in risk modeling, assessment, and management This book examines risk analysis, focusing on quantifying risk and constructing probabilities for real-world decision-making, including engineering, design, technology, institutions, organizations, and policy. The author presents fundamental concepts (hierarchical holographic modeling; state space; decision analysis; multi-objective trade-off analysis) as well as advanced material (extreme events and the partitioned multi-objective risk method; multi-objective decision trees; multi-objective risk impact analysis method; guiding principles in risk analysis); avoids higher mathematics whenever possible; and reinforces the material with examples and case studies. The book will be used in systems engineering, enterprise risk management, engineering management, industrial engineering, civil engineering, and operations research. The fourth edition of Risk Modeling, Assessment, and Management features: Expanded chapters on systems-based guiding principles for risk modeling, planning, assessment, management, and communication; modeling interdependent and interconnected complex systems of systems with phantom system models; and hierarchical holographic modeling An expanded appendix including a Bayesian analysis for the prediction of chemical carcinogenicity, and the Farmer’s Dilemma formulated and solved using a deterministic linear model Updated case studies including a new case study on sequential Pareto-optimal decisions for emergent complex systems of systems A new companion website with over 200 solved exercises that feature risk analysis theories, methodologies, and application Risk Modeling, Assessment, and Management, Fourth Edition, is written for both undergraduate and graduate students in systems engineering and systems management courses. The text also serves as a resource for academic, industry, and government professionals in the fields of homeland and cyber security, healthcare, physical infrastructure systems, engineering, business, and more.
Download or read book Bayesian Modeling Using WinBUGS written by Ioannis Ntzoufras and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: A hands-on introduction to the principles of Bayesian modeling using WinBUGS Bayesian Modeling Using WinBUGS provides an easily accessible introduction to the use of WinBUGS programming techniques in a variety of Bayesian modeling settings. The author provides an accessible treatment of the topic, offering readers a smooth introduction to the principles of Bayesian modeling with detailed guidance on the practical implementation of key principles. The book begins with a basic introduction to Bayesian inference and the WinBUGS software and goes on to cover key topics, including: Markov Chain Monte Carlo algorithms in Bayesian inference Generalized linear models Bayesian hierarchical models Predictive distribution and model checking Bayesian model and variable evaluation Computational notes and screen captures illustrate the use of both WinBUGS as well as R software to apply the discussed techniques. Exercises at the end of each chapter allow readers to test their understanding of the presented concepts and all data sets and code are available on the book's related Web site. Requiring only a working knowledge of probability theory and statistics, Bayesian Modeling Using WinBUGS serves as an excellent book for courses on Bayesian statistics at the upper-undergraduate and graduate levels. It is also a valuable reference for researchers and practitioners in the fields of statistics, actuarial science, medicine, and the social sciences who use WinBUGS in their everyday work.
Download or read book Simulation Driven Design Optimization and Modeling for Microwave Engineering written by Slawomir Koziel and published by World Scientific. This book was released on 2013 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the other hand, various interactions between microwave devices and their environment, such as feeding structures and housing, must be taken into account, and this is only possible through full-wave EM analysis. Electromagnetic simulations can be highly accurate, but they tend to be computationally expensive. Therefore, practical design optimization methods have to be computationally efficient, so that the number of CPU-intensive high-fidelity EM simulations is reduced as much as possible during the design process. For the same reasons, techniques for creating fast yet accurate models of microwave structures become crucially important. In this edited book, the authors strive to review the state-of-the-art simulation-driven microwave design optimization and modeling. A group of international experts specialized in various aspects of microwave computer-aided design summarize and review a wide range of the latest developments and real-world applications.
Download or read book Working with Dynamic Crop Models written by Daniel Wallach and published by Elsevier. This book was released on 2006-05-10 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical models are being used more and more widely to study complex dynamic systems (global weather, ecological systems, hydrological systems, nuclear reactors etc. including the specific subject of this book, crop-soil systems). The models are important aids in understanding, predicting and managing these systems. Such models are complex and imperfect. One fundamental research direction is to seek a better understanding of how these systems function, and to propose mathematical expressions embodying that understanding. However, this is not sufficient. It is also essential to have tools (often mathematical and statistical methods) to aid in developing, improving and using the models built from those equations. The book is specifically concerned with the application of methods to crop models, but much of the material is also applicable to dynamic system models in other fields. The goal of this book is to fill that gap.* State-of-the-art methods explained simply and illustrated specifically for crop models* Parameter estimation – applying statistical methods to the complex case of crop models, including Bayesian methods * Includes model evaluation, understanding and estimating prediction error* Offers a unique data assimilation by using the Kalman filter and beyond
