Download or read book Texture and Microstructure Development in Al 2 Mg During High Temperature Deformation written by and published by . This book was released on 1990 with total page 17 pages. Available in PDF, EPUB and Kindle. Book excerpt: The high rate sensitivity of the flow stress that is exhibited by alloys under solute drag control, such as Al-Mg at high temperatures, influences texture development because more slip systems contribute to deformation. Al-2% Mg was tested in channel-die compression, i.e. idealized rolling, at 290°C and 400°C, at strain rates from 10−1/s to 10−5/s. The texture development in rolling predicted by polycrystal plasticity simulation indicates that the brass component increases while the copper component decreases when the rate sensitivity is raised. The experimental results are in good agreement with this prediction. In addition, cube component appears when microstructural change occurs due to dynamic recrystallization. This microstructural change leads to the shift from {l angle}011{r angle} to {l angle}001{r angle} fiber texture in free compression at high temperature. 18 refs., 13 figs.
Download or read book Materials Processing and Texture written by A. D. Rollett and published by John Wiley & Sons. This book was released on 2008-12-05 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains papers presented at The 15th International Conference on the Texture of Materials from June 1-5th, 2008 in Pittsburgh, PA. Chapters include: Friction Stir Welding and Processing Texture and Anisotropy in Steels Effects of Magnetic Fields Hexagonal Metals Texture in Materials Design View information on Applications of Texture Analysis: Ceramic Transactions, Volume 201.
Download or read book Texture and Anisotropy written by U. F. Kocks and published by Cambridge University Press. This book was released on 2000-08-15 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: A successful book covering an important area of materials science, now available in paperback.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 8th Pacific Rim International Conference on Advanced Materials and Processing PRICM 8 written by FernD.S. Marquis and published by Springer. This book was released on 2017-03-21 with total page 3431 pages. Available in PDF, EPUB and Kindle. Book excerpt: PRICM-8 features the most prominent and largest-scale interactions in advanced materials and processing in the Pacific Rim region. The conference is unique in its intrinsic nature and architecture which crosses many traditional discipline and cultural boundaries. This is a comprehensive collection of papers from the 15 symposia presented at this event.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1991 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hot Deformation of Aluminum Alloys written by Minerals, Metals and Materials Society. Non-ferrous Metals Committee and published by . This book was released on 1991 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Light Metals 2014 written by John Grandfield and published by Springer. This book was released on 2016-12-23 with total page 1351 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Light Metals symposia are a key part of the TMS Annual Meeting & Exhibition, presenting the most recent developments, discoveries, and practices in primary aluminum science and technology. Publishing the proceedings from these important symposia, the Light Metals volume has become the definitive reference in the field of aluminum production and related light metal technologies. The 2014 collection includes papers from the following symposia: •Alumina and Bauxite •Aluminum Alloys: Fabrication, Characterization and Applications •Aluminum Processing •Aluminum Reduction Technology •Cast Shop for Aluminum Production •Electrode Technology for Aluminum Production •Light-metal Matrix (Nano)-composites
Download or read book Proceedings of the TMS Middle East written by Ibrahim Karaman and published by John Wiley & Sons. This book was released on 2015-08-03 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Magnesium Technology 2020 written by J. Brian Jordon and published by Springer Nature. This book was released on 2020-01-22 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, the event on which this collection is based, is one of the largest yearly gatherings of magnesium specialists in the world. Papers represent all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2020 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; and structural applications. In addition, there is coverage of new and emerging applications.
Download or read book Light Metals Advances in Research and Application 2012 Edition written by and published by ScholarlyEditions. This book was released on 2012-12-26 with total page 1913 pages. Available in PDF, EPUB and Kindle. Book excerpt: Light Metals—Advances in Research and Application: 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Light Metals. The editors have built Light Metals—Advances in Research and Application: 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Light Metals in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Light Metals—Advances in Research and Application: 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Advances on Extrusion Technology and Simulation of Light Alloys written by Luca Tomesani and published by Trans Tech Publications Ltd. This book was released on 2008-02-11 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS). This collection offers a fully representative snapshot of modelling activities as applied to processes involving extrusion. It covers a wide range of topics, grouped into the categories: benchmark, keynotes, material flow and constitutive equations, microstructure, seam welds and process optimization, dies and tools.
Download or read book Magnesium Materials written by Yoshiki Oshida and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-02-08 with total page 822 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides an introduction to the topic of magnesium materials for biomedical applications. Additional to the background on magnesium’s physical, chemical and mechanical properties, areas of use, related diseases and pathways for biodegradation will be discussed. Also, an outlook of the future of magnesium material applications will be provided.
Download or read book Magnesium Technology 2012 written by Suveen Mathaudhu and published by Springer. This book was released on 2016-12-19 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, which takes place every year at the TMS Annual Meeting & Exhibition, is one of the largest yearly gatherings of magnesium specialists in the world. Papers are presented in all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2011 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, you'll find coverage of new and emerging applications in such areas as biomedicine and hydrogen storage.
Download or read book Recrystallization and Related Annealing Phenomena written by Anthony Rollett and published by Newnes. This book was released on 2017-07-24 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recrystallization and Related Annealing Phenomena, Third Edition, fulfills the information needs of materials scientists in both industry and academia. The subjects treated in the book are all active research areas, forming a major part of at least four regular international conference series. This new third edition ensures the reader has access to the latest findings, and is essential reading to those working in the forefront of research in universities and laboratories. For those in industry, the book highlights applications of the research and technology, exploring, in particular, the significant progress made recently in key areas such as deformed state, including deformation to very large strains, the characterization of microstructures by electron backscatter diffraction, the modeling and simulation of annealing, and continuous recrystallization. - Includes over 50% of new, revised, and updated material, highlighting the significant recent literature results in grain growth in non-crystallizing systems, 3D characterization techniques, quantitative modeling techniques, and all-new appendices on texture and measurements - Contains synthesized, detailed coverage from leading authors that bridge the gap between theory and practice - Includes a critical level of synthesis and pedagogy with an authored rather than edited volume
Download or read book Magnesium Technology 2011 written by Wim Sillekens and published by Springer. This book was released on 2016-12-10 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Magnesium Technology Symposium, which takes place every year at the TMS Annual Meeting & Exhibition, is one of the largest yearly gatherings of magnesium specialists in the world. Papers are presented in all aspects of the field, ranging from primary production to applications to recycling. Moreover, papers explore everything from basic research findings to industrialization. Magnesium Technology 2011 covers a broad spectrum of current topics, including alloys and their properties; cast products and processing; wrought products and processing; forming, joining, and machining; corrosion and surface finishing; ecology; and structural applications. In addition, you'll find coverage of new and emerging applications in such areas as biomedicine and hydrogen storage.
Download or read book Essential Readings in Magnesium Technology written by Suveen Mathaudhu and published by Springer. This book was released on 2016-12-06 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a compilation of the best papers in the history of Magnesium Technology, a definitive annual reference in the field of magnesium production and related light metals technologies. The volume contains a strong topical mix of application and fundamental research articles on magnesium technology. Section titles: 1.Magnesium Technology History and Overview 2.Electrolytic and Thermal Primary Production 3.Melting, Refining, Recycling, and Life-Cycle Analysis 4.Casting and Solidification 5.Alloy and Microstructural Design 6.Wrought Processing 7.Modeling and Simulation 8.Joining 9.Corrosion, Surface Treatment, and Coating
