Download or read book Compendium of Sanitation Systems and Technologies written by Elizabeth Tilley and published by . This book was released on 2014 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fuel Cell Technology Handbook written by Gregor Hoogers and published by CRC Press. This book was released on 2002-09-27 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cell systems have now reached a degree of technological maturity and appear destined to form the cornerstone of future energy technologies. But the rapid advances in fuel cell system development have left current information available only in scattered journals and Internet sites. The even faster race toward fuel cell commercialization further

Download or read book Optimization Models written by Giuseppe C. Calafiore and published by Cambridge University Press. This book was released on 2014-10-31 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible textbook demonstrates how to recognize, simplify, model and solve optimization problems - and apply these principles to new projects.

Download or read book Biomass and Bioenergy written by Khalid Rehman Hakeem and published by Springer. This book was released on 2014-08-22 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass obtained from agricultural residues or forest can be used to produce different materials and bioenergy required in a modern society. As compared to other resources available, biomass is one of the most common and widespread resources in the world. Thus, biomass has the potential to provide a renewable energy source, both locally and across large areas of the world. It is estimated that the total investment in the biomass sector between 2008 and 2021 will reach the large sum of $104 billion. Presently bioenergy is the most important renewable energy option and will remain so the near and medium-term future. Previously several countries try to explore the utilization of biomass in bioenergy and composite sector. Biomass has the potential to become the world’s largest and most sustainable energy source and will be very much in demand. Bioenergy is based on resources that can be utilized on a sustainable basis all around the world and can thus serve as an effective option for the provision of energy services. In addition, the benefits accrued go beyond energy provision, creating unique opportunities for regional development. The present book will provide an up-to-date account of non-wood, forest residues, agricultural biomass (natural fibers), and energy crops together with processing, properties, and its applications to ensure biomass utilization and reuse. All aspects of biomass and bioenergy and their properties and applications will be critically re-examined. The book consists of three sections, presenting Non wood and forest products from forestry, arboriculture activities or from wood processing, agricultural biomass (natural fibers) from agricultural harvesting or processing and finally energy crops: high yield crops and grasses grown especially for energy production.​

Download or read book RETRACTED BOOK 151 Trading Strategies written by Zura Kakushadze and published by Springer. This book was released on 2018-12-13 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides detailed descriptions, including more than 550 mathematical formulas, for more than 150 trading strategies across a host of asset classes and trading styles. These include stocks, options, fixed income, futures, ETFs, indexes, commodities, foreign exchange, convertibles, structured assets, volatility, real estate, distressed assets, cash, cryptocurrencies, weather, energy, inflation, global macro, infrastructure, and tax arbitrage. Some strategies are based on machine learning algorithms such as artificial neural networks, Bayes, and k-nearest neighbors. The book also includes source code for illustrating out-of-sample backtesting, around 2,000 bibliographic references, and more than 900 glossary, acronym and math definitions. The presentation is intended to be descriptive and pedagogical and of particular interest to finance practitioners, traders, researchers, academics, and business school and finance program students.

Download or read book Automotive Fuels Reference Book written by Paul Richards and published by SAE International. This book was released on 2014-03-05 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first two editions of this title, published by SAE International in 1990 and 1995, have been best-selling definitive references for those needing technical information about automotive fuels. This long-awaited new edition has been thoroughly revised and updated, yet retains the original fundamental fuels information that readers find so useful. This book is written for those with an interest in or a need to understand automotive fuels. Because automotive fuels can no longer be developed in isolation from the engines that will convert the fuel into the power necessary to drive our automobiles, knowledge of automotive fuels will also be essential to those working with automotive engines. Small quantities of fuel additives increasingly play an important role in bridging the gap that often exists between fuel that can easily be produced and fuel that is needed by the ever-more sophisticated automotive engine. This book pulls together in a single, extensively referenced volume, the three different but related topics of automotive fuels, fuel additives, and engines, and shows how all three areas work together. It includes a brief history of automotive fuels development, followed by chapters on automotive fuels manufacture from crude oil and other fossil sources. One chapter is dedicated to the manufacture of automotive fuels and fuel blending components from renewable sources. The safe handling, transport, and storage of fuels, from all sources, are covered. New combustion systems to achieve reduced emissions and increased efficiency are discussed, and the way in which the fuels’ physical and chemical characteristics affect these combustion processes and the emissions produced are included. There is also discussion on engine fuel system development and how these different systems affect the corresponding fuel requirements. Because the book is for a global market, fuel system technologies that only exist in the legacy fleet in some markets are included. The way in which fuel requirements are developed and specified is discussed. This covers test methods from simple laboratory bench tests, through engine testing, and long-term test procedures.

Download or read book Green Fuels Technology written by Carlos Ricardo Soccol and published by Springer. This book was released on 2016-08-10 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents key recent developments in biofuel policy, products, processes, patents and innovative technologies. It presents several case studies, which maximize reader insights into how innovative green energy technologies can be implemented on an industrial scale, with illustrations, photos and new approaches. It also analyzes in detail several different technological aspects of the research into and production of green fuels from the first, second and third generation, such as, bioethanol, biogas, biohydrogen, biobutanol, biofuels from pyrolysis, and discusses their economic and environmental impacts. A new source of information for engineers, technicians and students involved in production and research in the biofuels sector, this book also provides a valuable resource for industry, covering the current and future status of biofuels.

Download or read book Electric Vehicles Prospects and Challenges written by Tariq Muneer and published by Elsevier. This book was released on 2017-07-11 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric Vehicles: Prospects and Challenges looks at recent design methodologies and technological advancements in electric vehicles and the integration of electric vehicles in the smart grid environment, comprehensively covering the fundamentals, theory and design, recent developments and technical issues involved with electric vehicles. Considering the prospects, challenges and policy status of specific regions and vehicle deployment, the global case study references make this book useful for academics and researchers in all engineering and sustainable transport areas. - Presents a systematic and integrated reference on the essentials of theory and design of electric vehicle technologies - Provides a comprehensive look at the research and development involved in the use of electric vehicle technologies - Includes global case studies from leading EV regions, including Nordic and European countries China and India

Download or read book Biomass Combustion Science Technology and Engineering written by Lasse Rosendahl and published by Elsevier. This book was released on 2013-04-04 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilisation of biomass is increasingly important for low- or zero-carbon power generation. Developments in conventional power plant fuel flexibility allow for both direct biomass combustion and co-firing with fossil fuels, while the integration of advanced technologies facilitates conversion of a wide range of biomass feedstocks into more readily combustible fuel. Biomass combustion science, technology and engineering reviews the science and technology of biomass combustion, conversion and utilisation.Part one provides an introduction to biomass supply chains and feedstocks, and outlines the principles of biomass combustion for power generation. Chapters also describe the categorisation and preparation of biomass feedstocks for combustion and gasification. Part two goes on to explore biomass combustion and co-firing, including direct combustion of biomass, biomass co-firing and gasification, fast pyrolysis of biomass for the production of liquids and intermediate pyrolysis technologies. Largescale biomass combustion and biorefineries are then the focus of part three. Following an overview of large-scale biomass combustion plants, key engineering issues and plant operation are discussed, before the book concludes with a chapter looking at the role of biorefineries in increasing the value of the end-products of biomass conversion.With its distinguished editor and international team of expert contributors, Biomass combustion science, technology and engineering provides a clear overview of this important area for all power plant operators, industrial engineers, biomass researchers, process chemists and academics working in this field. - Reviews the science and technology of biomass combustion, conversion and utilisation - Provides an introduction to biomass supply chains and feedstocks and outlines the principles of biomass combustion for power generation - Describes the categorisation and preparation of biomass feedstocks for combustion and gasification

Download or read book Biofuels in Brazil written by Silvio Silvério da Silva and published by Springer Science & Business Media. This book was released on 2014-04-02 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the commercialization of biofuels and the Brazilian government policies for the promotion of renewable energy program in Brazil, which could be a learning module for several countries for implementing biofuels policy to improve their socioeconomic status and make them energy independent. Researchers in academia and industries, policy makers, and economic analysts will be assisted by important source of information in their ongoing research and future perspectives. This book will benefit graduate and postgraduate students of chemical and biochemical engineering, forestry, microbiology, biochemistry, biotechnology, applied chemistry, environmental science, sustainable energy, and biotech business disciplines by signifying the applied aspects of bioenergy production from various natural sources and their implications. Graduate and postgraduate students as well as postdoctoral researchers will find clear concepts of feedstock analysis, feedstock degradation, microbial fermentation, genetic engineering, renewable energy generation and storage, climate changes, and techno-economic analysis of biofuels production technologies.

Download or read book Optimization written by Rajesh Kumar Arora and published by CRC Press. This book was released on 2015-05-06 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Choose the Correct Solution Method for Your Optimization ProblemOptimization: Algorithms and Applications presents a variety of solution techniques for optimization problems, emphasizing concepts rather than rigorous mathematical details and proofs. The book covers both gradient and stochastic methods as solution techniques for unconstrained and co

Download or read book XXV a os de ingenier a f sica en M xico written by Jaime Granados Samaniego and published by . This book was released on 2000 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Science and Technology of Ceramic Fuel Cells written by N.Q. Minh and published by Elsevier. This book was released on 1995-08-15 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic fuel cells, commonly known as solid oxide fuel cells (SOFCs), have been under development for a broad range of electric power generation applications. The most attractive feature of the SOFC is its clean and efficient production of electricity from a variety of fuels. The SOFC has the potential to be manufactured and operated cost-effectively. The widening interest in this technology, thus, arises from the continuing need to develop cleaner and more efficient means of converting energy sources into useful forms.This topical book provides a comprehensive treatise on solid oxide fuel cells and succeeds successfully in filling the gap in the market for a reference book in this field. Directed towards scientists, engineers, and technical managers working with SOFCs as well as ceramic devices based on conducting materials, and in related fields, the book will also be invaluable as a textbook for science and engineering courses.

Download or read book Migrating to Opportunity written by Mauro Testaverde and published by World Bank Publications. This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acknowledgements -- Overview -- Workers in southeast Asia are on the move -- Migration in ASEAN -- The determinants of migration in ASEAN and the importance of labor mobility costs -- The impacts of migration in ASEAN -- Trade integration and labor mobility in the ASEAN economic community -- Migration policy in the ASEAN region -- Reducing migration costs in ASEAN -- List of figures

Download or read book Biomass Conversion written by Chinnappan Baskar and published by Springer Science & Business Media. This book was released on 2012-05-08 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: The consumption of petroleum has surged during the 20th century, at least partially because of the rise of the automobile industry. Today, fossil fuels such as coal, oil, and natural gas provide more than three quarters of the world's energy. Unfortunately, the growing demand for fossil fuel resources comes at a time of diminishing reserves of these nonrenewable resources. The worldwide reserves of oil are sufficient to supply energy and chemicals for only about another 40 years, causing widening concerns about rising oil prices. The use of biomass to produce energy is only one form of renewable energy that can be utilized to reduce the impact of energy production and use on the global environment. Biomass can be converted into three main products such as energy, biofuels and fine chemicals using a number of different processes. Today, it is a great challenge for researchers to find new environmentally benign methodology for biomass conversion, which are industrially profitable as well. This book focuses on the conversion of biomass to biofuels, bioenergy and fine chemicals with the interface of biotechnology, microbiology, chemistry and materials science. An international scientific authorship summarizes the state-of-the-art of the current research and gives an outlook on future developments.

Download or read book Reliability centered Maintenance written by John Moubray and published by Industrial Press Inc.. This book was released on 2001 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completely reorganised and comprehensively rewritten for its second edition, this guide to reliability-centred maintenance develops techniques which are practised by over 250 affiliated organisations worldwide.

Download or read book Silvopastoral Systems in Southern South America written by Pablo Luis Peri and published by Springer. This book was released on 2016-03-02 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-authored volume contains peer-reviewed chapters from leading researchers and professionals in silvopastoral systems topic in Southern South America (Argentina, Chile and South Brazil). It is a compendium of original research articles, case studies, and regional overviews and summarizes the current state of knowledge on different components and aspects (pasture production, animal production, trees production, carbon sequestration, conservation) of silvopatoral systems in native forests and tree plantations. The main hypothesis of the book is that farmers have integrated tree and pasture/grassland species in their land use systems to reach higher production per unit of land area, risk avoidance, product diversification, and sustainability. These production systems also impact positively in main ecosystem processes. Management of these productive systems, Policy and Socioeconomic Aspects provide great opportunities and challenges for farmers and policy makers in our region. The book is unique on this subject in Southern South America and constitutes a valuable reference material for graduate students, professors, scientists and extensionists who work with silvopastoral systems.