Download or read book Technologies for Recycling Post consumer Mixed Plastics written by Bruce A. Hegberg and published by . This book was released on 1991 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mixed Plastics Recycling Technology written by Bruce Hegberg and published by William Andrew. This book was released on 1992-12-31 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an overview of mixed plastics recycling technology. In addition, it characterizes mixed plastics wastes and describes collection methods, costs, and markets for reprocessed plastics products.
Download or read book Plastics Additives written by G. Pritchard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although plastics are extremely successful commercially, they would never reach acceptable performance standards either in properties or processing without the incorporation of additives. With the inclusion of additives, plastics can be used in a variety of areas competing directly with other materials, but there are still many challenges to overcome. Some additives are severely restricted by legislation, others interfere with each other-in short their effectiveness varies with circumstances. Plastics Additives explains these issues in an alphabetical format making them easily accessible to readers, enabling them to find specific information on a specific topic. Each additive is the subject of one or more articles, providing a suffinct account of each given topic. An international group of experts in additive and polymer science, from many world class companies and institutes, explain the recent rapid changes in additive technology. They cover novel additives (scorch inhibitors, compatibilizers, surface-modified particulates etc.), the established varieties (antioxidants, biocides, antistatic agents, nucleating agents, fillers, fibres, impact modifiers, plasticizers) and many others, the articles also consider environmental concerns, interactions between additives and legislative change. With a quick reference guide and introductory articles that provide the non-specialist and newcomer with relevant information, this reference book is essential reading for anyone concerned with plastics and additives.
Download or read book Plastic Waste Markets written by David McKinnon and published by Nordic Council of Ministers. This book was released on 2018-05-29 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project examines the market for recycled plastic, with a primary focus on post-consumer plastic waste because this is considered to be the more problematic. The market for plastic waste generated in manufacturing and production is relatively strong and well-functioning; As a consequence, the majority of plastic waste from manufacturing and production is recycled. Post-consumer waste is much less homogenous: it comes from a wide variety of sources, and contains a wide variety of plastics and tends to be difficult to collect, sort, and recycle. This project identifies barriers to further utilisation of recycled plastics, and analyses a collection of policy tools that could be used to support and expand that market.
Download or read book Feedstock Recycling of Plastic Wastes written by Jose Aguado and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of plastic materials has seen a massive increase in recent years, and generation of plastic wastes has grown proportionately. Recycling of these wastes to reduce landfill disposal is problematic due to the wide variation in properties and chemical composition among the different types of plastics. Feedstock recycling is one of the alternatives available for consideration, and Feedstock Recycling of Plastic Wastes looks at the conversion of plastic wastes into valuable chemicals useful as fuels or raw materials. Looking at both scientific and technical aspects of the recycling developments, this book describes the alternatives available. Areas include chemical depolymerization, thermal processes, oxidation and hydrogenation. Besides conventional treatments, new technological approaches for the degradation of plastics, such as conversion under supercritical conditions and coprocessing with coal are discussed. This book is essential reading for those involved in plastic recycling, whether from an academic or industrial perspective. Consultants and government agencies will also find it immensely useful.
Download or read book Handbook of Plastics Recycling written by Francesco Paolo La Mantia and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses some of the state-of-the-art techniques of recycling post-consumer plastic materials and focuses on mechanical recycling, chemical recycling and energy recovery. The book is intended for all those who are interested in recycling of post consumer plastic waste. Although, this book discusses technical aspects of recycling, the authors have endeavoured to make this book easily understandable to anyone interested in the subject enabling the reader to gain a thorough grounding in all the subjects discussed.
Download or read book Plastic Waste and Recycling written by Trevor Letcher and published by Academic Press. This book was released on 2020-03-10 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic Waste and Recycling: Environmental Impact, Societal Issues, Prevention, and Solutions begins with an introduction to the different types of plastic materials, their uses, and the concepts of reduce, reuse and recycle before examining plastic types, chemistry and degradation patterns that are organized by non-degradable plastic, degradable and biodegradable plastics, biopolymers and bioplastics. Other sections cover current challenges relating to plastic waste, explain the sources of waste and their routes into the environment, and provide systematic coverage of plastic waste treatment methods, including mechanical processing, monomerization, blast furnace feedstocks, gasification, thermal recycling, and conversion to fuel. This is an essential guide for anyone involved in plastic waste or recycling, including researchers and advanced students across plastics engineering, polymer science, polymer chemistry, environmental science, and sustainable materials. - Presents actionable solutions for reducing plastic waste, with a focus on the concepts of collection, re-use, recycling and replacement - Considers major societal and environmental issues, providing the reader with a broader understanding and supporting effective implementation - Includes detailed case studies from across the globe, offering unique insights into different solutions and approaches
Download or read book Post consumer Mixed Plastics Recycling written by Bruce A. Hegberg and published by . This book was released on 1991 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Designing plastics circulation written by Anne Raudaskoski and published by Nordic Council of Ministers. This book was released on 2019-08-05 with total page 41 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presently most electrical/electronic equipment (EEE) is not designed for recycling, let alone for circulation. Plastics in these products account for 20% of material use, and through better design, significant environmental and financial savings could be gained. Technological solutions and circular design opportunities already exist, but they haven’t been implemented yet. Some challenges, such as ease of disassembly, could be resolved through better communication and by sharing learnings across the value chain.Instead of WEEE, we should focus on developing CEEE: Circular Electrical and Electronic Equipment.The case examples of this report show how different stages of the lifecycle can be designed so that plastics circulation becomes possible and makes business sense. It is time to take a leap in material flow management and scale up these circular solutions across the industry.
Download or read book Food Packaging written by Gordon L. Robertson and published by CRC Press. This book was released on 2016-04-19 with total page 719 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an integrated approach to understanding the principles underlying food packaging and their applications. This edition includes new and expanded coverage of biobased packaging and bionanocomposites; nanotechnology applications, including nanoclays; metallization and atomic layer deposition; shelf life design, analysis, and estimation; safety and legislative aspects of packaging including public interest in food contact materials such as BPA and phthalates; life cycle assessment and sustainability. A new chapter addresses food packaging closures and sealing systems, including closures for plastic and composite containers and peelable seals.
Download or read book Life Cycle Impact Assessment written by Michael Z. Hauschild and published by Springer. This book was released on 2015-03-24 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a detailed presentation of the principles and practice of life cycle impact assessment. As a volume of the LCA compendium, the book is structured according to the LCIA framework developed by the International Organisation for Standardisation (ISO)passing through the phases of definition or selection of impact categories, category indicators and characterisation models (Classification): calculation of category indicator results (Characterisation); calculating the magnitude of category indicator results relative to reference information (Normalisation); and converting indicator results of different impact categories by using numerical factors based on value-choices (Weighting). Chapter one offers a historical overview of the development of life cycle impact assessment and presents the boundary conditions and the general principles and constraints of characterisation modelling in LCA. The second chapter outlines the considerations underlying the selection of impact categories and the classification or assignment of inventory flows into these categories. Chapters three through thirteen exploreall the impact categories that are commonly included in LCIA, discussing the characteristics of each followed by a review of midpoint and endpoint characterisation methods, metrics, uncertainties and new developments, and a discussion of research needs. Chapter-length treatment is accorded to Climate Change; Stratospheric Ozone Depletion; Human Toxicity; Particulate Matter Formation; Photochemical Ozone Formation; Ecotoxicity; Acidification; Eutrophication; Land Use; Water Use; and Abiotic Resource Use. The final two chapters map out the optional LCIA steps of Normalisation and Weighting.
Download or read book Polypropylene written by J. Karger-Kocsis and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: My heart sank when I was approached by Dr Hastings and by Professor Briggs (Senior Editor of Materials Science and Technology and Series Editor of Polymer Science and Technology Series at Chapman & Hall, respectively) to edit a book with the provisional title Handbook of Poly propylene. My reluctance was due to the fact that my former book [1] along with that of Moore [2], issued in the meantime, seemed to cover the information demand on polypropylene and related systems. Encour aged, however, by some colleagues (the new generation of scientists and engineers needs a good reference book with easy information retrieval, and the development with metallocene catalysts deserves a new update!), I started on this venture. Having some experience with polypropylene systems and being aware of the current literature, it was easy to settle the titles for the book chapters and also to select and approach the most suitable potential contributors. Fortunately, many of my first-choice authors accepted the invitation to contribute. Like all editors of multi-author volumes, I recognize that obtaining contributors follows an S-type curve of asymptotic saturation when the number of willing contributors is plotted as a function of time. The saturation point is, however, never reached and as a consequence, Dear Reader, you will also find some topics of some relevance which are not explicitly treated in this book (but, believe me, I have considered them).
Download or read book Cradle to Cradle written by William McDonough and published by North Point Press. This book was released on 2010-03-01 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: A manifesto for a radically different philosophy and practice of manufacture and environmentalism "Reduce, reuse, recycle" urge environmentalists; in other words, do more with less in order to minimize damage. But as this provocative, visionary book argues, this approach perpetuates a one-way, "cradle to grave" manufacturing model that dates to the Industrial Revolution and casts off as much as 90 percent of the materials it uses as waste, much of it toxic. Why not challenge the notion that human industry must inevitably damage the natural world? In fact, why not take nature itself as our model? A tree produces thousands of blossoms in order to create another tree, yet we do not consider its abundance wasteful but safe, beautiful, and highly effective; hence, "waste equals food" is the first principle the book sets forth. Products might be designed so that, after their useful life, they provide nourishment for something new-either as "biological nutrients" that safely re-enter the environment or as "technical nutrients" that circulate within closed-loop industrial cycles, without being "downcycled" into low-grade uses (as most "recyclables" now are). Elaborating their principles from experience (re)designing everything from carpeting to corporate campuses, William McDonough and Michael Braungart make an exciting and viable case for change.
Download or read book Trends in Packaging of Food Beverages and Other Fast Moving Consumer Goods FMCG written by Neil Farmer and published by Elsevier. This book was released on 2013-02-26 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packaging plays an essential role in protecting and extending the shelf life of a wide range of foods, beverages and other fast-moving consumer goods. There have been many key developments in packaging materials and technologies in recent years, and Trends in packaging of food, beverages and other fast-moving consumer goods (FMCG) provides a concise review of these developments and international market trends.Beginning with a concise introduction to the present status and trends in innovations in packaging for food, beverages and other fast-moving consumer goods, the book goes on to consider modified atmosphere packaging and other active packaging systems, including smart and intelligent packaging, and the role these play in augmenting and securing the consumer brand experience. Developments in plastic and bioplastic materials and recycling systems are then discussed, followed by innovations and trends in metal, paper and paperboard packaging. Further chapters review international environmental and sustainability regulatory and legislative frameworks, before the use of nanotechnology, smart and interactive packaging developments for enhanced communication at the packaging/user interface are explored. Finally, the book concludes by considering potential future trends in materials and technologies across the international packaging market.With its distinguished editor and international team of expert contributors, Trends in packaging of food, beverages and other fast-moving consumer goods (FMCG) is an important reference tool, providing a practical overview of emerging packaging technologies and market trends for research and design professionals in the food and packaging industry, and academics working in this area. - Introduces the present status, current trends and new innovations in the field whilst considering future trends in materials and technologies - Considers modified atmosphere packaging and other active packaging systems including smart and intelligent packaging - Discusses developments in plastic and bioplastic materials and recycling systems
Download or read book Recycling of Polyethylene Terephthalate written by Martin J. Forrest and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-04-01 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polyethylene terephthalate (PET) is the most recycled plastic in the world. This book covers all from the world market of PET to the many technologies and processes developed for separation, decontamination, recycling and manufacturing into food-grade and non-food-grade products of PET. Also, regulations, testing methods and analytical procedures according to the current regulatory framework are presented.
Download or read book Technology of Paper Recycling written by R. McKinney and published by Springer Science & Business Media. This book was released on 1994-11-30 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the technology of the recovery of secondary fibre for its use in paper and board manufacture. The editor, who has had substantial practical experience of designing and commissioning paper recycling plants all over the world, leads a team of experts who discuss subjects including sourcing, characterisation, mechanical handling and preparation and de-inking.
Download or read book Recycling of Plastics Metals and Their Composites written by R.A. Ilyas and published by CRC Press. This book was released on 2021-12-27 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having a solid understanding of materials recycling is of high importance, especially due to the growing use of composites in many industries and increasingly strict legislation and concerns about the disposal of composites in landfills or by incineration. Recycling of Plastics, Metals, and Their Composites provides a comprehensive review of the recycling of waste polymers and metal composites. It provides the latest advances and covers the fundamentals of recycled polymers and metal composites, such as preparation, morphology, and physical, mechanical, thermal, and flame-retardancy properties. FEATURES Offers a state-of-the-art review of the recycling of polymer composites and metal composites for sustainability Describes a life-cycle analysis to help readers understand the true potential value and market for these recycled materials Details potential applications of recycled polymer and metal composites Includes the performance of natural fiber–reinforced recycled thermoplastic polymer composites under aging conditions and the recycling of multi-material plastics Covers recycling technologies, opportunities, and challenges for polymer-matrix composites This book targets technical professionals in the metal and polymer industries as well as researchers, scientists, and advanced students. It is also of interest to decision makers at material suppliers, recycled metal and polymer product manufacturers, and governmental agencies working with recycled metal and polymer composites.
