Download or read book Technology for Large Space Systems written by and published by . This book was released on 1990 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Space Systems written by Vincent L. Pisacane and published by Johns Hopkins University Appli. This book was released on 2005 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Space Systems was developed to satisfy two objectives: the first is to provide a text suitable for use in an advanced undergraduate or beginning graduate course in both space systems engineering and space system design. The second is to be a primer and reference book for space professionals wishing to broaden their capabilities to develop, manage the development, or operate space systems. The authors of the individual chapters are practicing engineers that have had extensive experience in developing sophisticated experimental and operational spacecraft systems in addition to having experience teaching the subject material. The text presents the fundamentals of all the subsystems of a spacecraft missions and includes illustrative examples drawn from actual experience to enhance the learning experience. It includes a chapter on each of the relevant major disciplines and subsystems including space systems engineering, space environment, astrodynamics, propulsion and flight mechanics, attitude determination and control, power systems, thermal control, configuration management and structures, communications, command and telemetry, data processing, embedded flight software, survuvability and reliability, integration and test, mission operations, and the initial conceptual design of a typical small spacecraft mission.
Download or read book Technology for Large Space Systems written by and published by . This book was released on 1987 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety Design for Space Systems written by Gary Eugene Musgrave and published by Butterworth-Heinemann. This book was released on 2009-03-27 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in space safety lies in the acceptance of safety design and engineering as an integral part of the design and implementation process for new space systems. Safety must be seen as the principle design driver of utmost importance from the outset of the design process, which is only achieved through a culture change that moves all stakeholders toward front-end loaded safety concepts. This approach entails a common understanding and mastering of basic principles of safety design for space systems at all levels of the program organisation. Fully supported by the International Association for the Advancement of Space Safety (IAASS), written by the leading figures in the industry, with frontline experience from projects ranging from the Apollo missions, Skylab, the Space Shuttle and the International Space Station, this book provides a comprehensive reference for aerospace engineers in industry. It addresses each of the key elements that impact on space systems safety, including: the space environment (natural and induced); human physiology in space; human rating factors; emergency capabilities; launch propellants and oxidizer systems; life support systems; battery and fuel cell safety; nuclear power generators (NPG) safety; habitat activities; fire protection; safety-critical software development; collision avoidance systems design; operations and on-orbit maintenance. - The only comprehensive space systems safety reference, its must-have status within space agencies and suppliers, technical and aerospace libraries is practically guaranteed - Written by the leading figures in the industry from NASA, ESA, JAXA, (et cetera), with frontline experience from projects ranging from the Apollo missions, Skylab, the Space Shuttle, small and large satellite systems, and the International Space Station - Superb quality information for engineers, programme managers, suppliers and aerospace technologists; fully supported by the IAASS (International Association for the Advancement of Space Safety)
Download or read book Advanced Technology for Human Support in Space written by National Research Council and published by National Academies Press. This book was released on 1997-08-02 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Technology for Human Support in Space was written in response to a request from NASA's Office of Life and Microgravity Sciences and Applications (OLMSA) to evaluate its Advanced Human Support Technology Program. This report reviews the four major areas of the program: advanced life support (ALS), environmental monitoring and control (EMC), extravehicular activities (EVA), and space human factors (SHF). The focus of this program is on long-term technology development applicable to future human long-duration space missions, such as for a hypothetical new mission to the Moon or Mars.
Download or read book Advanced Space System Concepts and Technologies 2010 2030 written by Ivan Bekey and published by AIAA. This book was released on 2003 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bekey presents an imaginative view of what space could be like in the next several decades if new technologies are developed and bold new innovative applications are undertaken. He discusses a future environment for space activities very different from the predominant conditions of the past and present.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Large Space Systems Technology written by and published by . This book was released on 1979 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Large Space Systems Low Thrust Propulsion Technology written by and published by . This book was released on 1980 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Spacecraft Momentum Control Systems written by Frederick A. Leve and published by Springer. This book was released on 2015-10-17 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this book is to serve both as a practical technical reference and a resource for gaining a fuller understanding of the state of the art of spacecraft momentum control systems, specifically looking at control moment gyroscopes (CMGs). As a result, the subject matter includes theory, technology, and systems engineering. The authors combine material on system-level architecture of spacecraft that feature momentum-control systems with material about the momentum-control hardware and software. This also encompasses material on the theoretical and algorithmic approaches to the control of space vehicles with CMGs. In essence, CMGs are the attitude-control actuators that make contemporary highly agile spacecraft possible. The rise of commercial Earth imaging, the advances in privately built spacecraft (including small satellites), and the growing popularity of the subject matter in academic circles over the past decade argues that now is the time for an in-depth treatment of the topic. CMGs are augmented by reaction wheels and related algorithms for steering all such actuators, which together comprise the field of spacecraft momentum control systems. The material is presented at a level suitable for practicing engineers and those with an undergraduate degree in mechanical, electrical, and/or aerospace engineering.
Download or read book Large Space Structures Systems in the Space Station Era written by and published by . This book was released on 1991 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 3D Printing in Space written by National Research Council (U.S.). Committee on Space-Based Additive Manufacturing and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Additive manufacturing has the potential to positively affect human spaceflight operations by enabling the in-orbit manufacture of replacement parts and tools, which could reduce existing logistics requirements for the International Space Station and future long-duration human space missions. The benefits of in-space additive manufacturing for robotic spacecraft are far less clear, although this rapidly advancing technology can also potentially enable space-based construction of large structures and, perhaps someday, substantially in the future, entire spacecraft. Additive manufacturing can also help to reimagine a new space architecture that is not constrained by the design and manufacturing confines of gravity, current manufacturing processes, and launch-related structural stresses. The specific benefits and potential scope of additive manufacturing remain undetermined. The realities of what can be accomplished today, using this technology on the ground, demonstrate the substantial gaps between the vision for additive manufacturing in space and the limitations of the technology and the progress that has to be made to develop it for space use. 3D Printing in Space evaluates the prospects of in-space additive manufacturing. This report examines the various technologies available and currently in development, and considers the possible impacts for crewed space operations and robotic spacecraft operations. Ground-based additive manufacturing is being rapidly developed by industry, and 3D Printing in Space discusses government-industry investments in technology development. According to this report, the International Space Station provides an excellent opportunity for both civilian and military research on additive manufacturing technology. Additive manufacturing presents potential opportunities, both as a tool in a broad toolkit of options for space-based activities and as a potential paradigm-changing approach to designing hardware for in-space activities. This report makes recommendations for future research, suggests objectives for an additive manufacturing roadmap, and envisions opportunities for cooperation and joint development.
Download or read book NASA Space Technology Roadmaps and Priorities written by National Research Council and published by National Academies Press. This book was released on 2012-06-07 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: NASA's Office of the Chief Technologist (OCT) has begun to rebuild the advanced space technology program in the agency with plans laid out in 14 draft technology roadmaps. It has been years since NASA has had a vigorous, broad-based program in advanced space technology development and its technology base has been largely depleted. However, success in executing future NASA space missions will depend on advanced technology developments that should already be underway. Reaching out to involve the external technical community, the National Research Council (NRC) considered the 14 draft technology roadmaps prepared by OCT and ranked the top technical challenges and highest priority technologies that NASA should emphasize in the next 5 years. This report provides specific guidance and recommendations on how the effectiveness of the technology development program managed by OCT can be enhanced in the face of scarce resources.
Download or read book Handbook of Space Technology written by Wilfried Ley and published by John Wiley & Sons. This book was released on 2009-03-18 with total page 908 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty years since the first edition was published in the German language, and just over fifty years since the launch of the Earth’s first ever artificial satellite Sputnik 1, this third edition of the Handbook of Space Technology presents in fully integrated colour a detailed insight into the fascinating world of space for the first time in the English language. Authored by over 70 leading experts from universities, research institutions and the space industry, this comprehensive handbook describes the processes and methodologies behind the development, construction, operation and utilization of space systems, presenting the profound changes that have occurred in recent years in the engineering, materials, processes and even politics associated with space technologies and utilization. The individual chapters are self-contained, enabling the reader to gain a quick and reliable overview of a selected field; an extensive reference and keyword list helps those who wish to deepen their understanding of individual topics. Featuring superb, full colour illustrations and photography throughout, this interdisciplinary reference contains practical, hands-on engineering and planning information that will be invaluable to those on a career path within space technology, or simply for those of us who’d like to know more about this fascinating industry. Main section headings include: Introduction (historical overview, space missions) Fundamentals (orbital mechanics, aerothermodynamics/ reentry, space debris) Launch Vehicles (staged technologies, propulsion systems, launch infrastructure) Space Vehicle Subsystems (structure, energy supply, thermal controls, attitude control, communication) Aspects of Human Flight (man in space, life support systems, rendezvous and docking) Mission Operations (satellite operation, control center, ground station network) Utilization of Space (Earth observation, communication navigation, space astronomy, material sciences, space medicine, robotics) Configuration and Design of a Space Vehicle (mission concept, system concept, environmental simulation, system design, Galileo satellites) Management of Space Missions (project management, quality management, cost management, space law)
Download or read book Space Safety and Human Performance written by Barbara G. Kanki and published by Butterworth-Heinemann. This book was released on 2017-11-10 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: Space Safety and Human Performance provides a comprehensive reference for engineers and technical managers within aerospace and high technology companies, space agencies, operators, and consulting firms. The book draws upon the expertise of the world's leading experts in the field and focuses primarily on humans in spaceflight, but also covers operators of control centers on the ground and behavior aspects of complex organizations, thus addressing the entire spectrum of space actors. During spaceflight, human performance can be deeply affected by physical, psychological and psychosocial stressors. Strict selection, intensive training and adequate operational rules are used to fight performance degradation and prepare individuals and teams to effectively manage systems failures and challenging emergencies. The book is endorsed by the International Association for the Advancement of Space Safety (IAASS). - 2019 PROSE Awards - Winner: Category: Engineering and Technology: Association of American Publishers - Provides information on critical aspects of human performance in space missions - Addresses the issue of human performance, from physical and psychosocial stressors that can degrade performance, to selection and training principles and techniques to enhance performance - Brings together essential material on: cognition and human error; advanced analysis methods such as human reliability analysis; environmental challenges and human performance in space missions; critical human factors and man/machine interfaces in space systems design; crew selection and training; and organizational behavior and safety culture - Includes an endorsement by the International Association for the Advancement of Space Safety (IAASS)
Download or read book A Review of United States Air Force and Department of Defense Aerospace Propulsion Needs written by National Research Council and published by National Academies Press. This book was released on 2007-01-14 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rocket and air-breathing propulsion systems are the foundation on which planning for future aerospace systems rests. A Review of United States Air Force and Department of Defense Aerospace Propulsion Needs assesses the existing technical base in these areas and examines the future Air Force capabilities the base will be expected to support. This report also defines gaps and recommends where future warfighter capabilities not yet fully defined could be met by current science and technology development plans.
Download or read book Future Spacecraft Propulsion Systems written by Paul A. Czysz and published by Springer Science & Business Media. This book was released on 2006-09-19 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: An understandable perspective on the types of space propulsion systems necessary to enable low-cost space flights to Earth orbit and to the Moon and the future developments necessary for exploration of the solar system and beyond to the stars.
